-
- EN
Retroreflective sensor O-40 Metal
LRT 41 M 2 G3-T3
Article Number: 204204
The transmitter and receiver are in one housing. The emitted light is reflected back by a reflector and evaluated in the retro reflective sensor. Polarization filters also allow the detection of reflecting objects. Retro reflective sensors make long ranges possible, with simple assembly and a high degree of system availability.
- Long ranges with a small design
- Connector, rotatable 270°
- Dovetail groove for secure mounting
- NO/NC changeover by teach key
- Auto and two-point teach procedures
- Auto-collimation principle
- Visible red light with small light spot
- Angled optics
- Display for unstable function
Your price: Login
Service voltage
10 … 30 V DC
No-load current (max.)
40 mA
Insulation voltage endurance
500 V
Housing dimensions
41 x 31.5 x 16 mm
Housing length
31.5 mm
Housing height
41 mm
Housing width
16 mm
Housing material
Die-cast zinc (Black, painted)
Material
PMMA (Window)
Protection class
III, operation on protective low voltage
Operating principle
Retroreflective sensor
Evaluation
digital
Design
Cuboid design
Switching output
Push-pull, 200 mA, NO/NC, switchable
Light source
Laser
Laser class
1 (IEC 60825-1)
Color
red
Modulation
Clocked
Ambient light immunity
50 kLx
Range
100 … 2000 mm
Referring reflector
RL 13 x 17 mm (included)
Switching hysteresis (max.)
10 %
Reproducibility
< 1 %
Sensitivity adjustment
Teach button
Switching frequency
1000 Hz
Ambient temperature during operation
0 … +50 °C
Protection type
IP 67
Connection
Connector, M8, 3-pin
Connection cable
TK …
Product
Connection
Design
Line length (mm)
Wire cross-section (mm²)
Protection type
The search found 5 hits
Title
Category
Filetype (size)
Select
Title:
204204_bpz_LRT_41_M_2_G3-T3
Category:
Installation Guides
Filetype (size):
PDF
(453.88 KB)
Select:
Title:
REACH Art. 33 Lichtschranken
Category:
Certificates - Declarations
Filetype (size):
PDF
(472.35 KB)
Select: