-
- EN
SBI-RGB Controller
Article Number: 210905
- Enables no-load switching of color channels
- Setting brightness of the connected SBI-RGB
- Status display via LEDs
- Overload display via LEDs
- Locked overload shutdown, resettable via voltage reset
This article is no longer available in the online shop.
If you are interested, please contact our Customer Service:
Phone: +49 7181 98 79-710 |
E-Mail: customer-service@di-soric.com
Possible successor products are presented at the end of the page.
Service voltage
24 V DC (± 5%, < 3.3 A)
No-load current (max.)
35 mA (24 V DC)
Inverse polarity protection
Yes
Short-circuit protection
Yes
Insulation voltage endurance
500 V
Switching limit per channel
> 1.6 A (24 V)
Mounting
on DIN-rail in accordance with EN 50022-35 standard
Housing dimensions
105.4 x 72 x 41.7 mm
Housing material
Aluminum
Protection class
III, operation on protective low voltage
EMC directives
DIN EN 55015:2016-04 / DIN EN 61547:2010-03
Component
Control unit for SBI-RGB
Operating principle
Pulse-Width Modulation (PWM)
To be used for
Status indicators SBI-RGB ...
Application
Brightness of two to three SBI-RGB ...
Light intensity can be adjusted
10 to 100 %
Number of channels
3
Trigger input high level
> 8.0 V
Trigger input low level
< 5.0 V
Trigger input
IN1 + IN2, load-free, 24 V DC, for color selection
Adjustment illumination intensity
Potentiometer
Display
LED Green - Operating display, yellow - Overload display, Red - Overload switch-off
Switching frequency
200 Hz (PWM)
Ambient temperature during operation
+5 … +45 °C
Protection type
IP 20
Connection
Clamps, 4-pin
The search found 5 hits
Title
Category
Filetype (size)
Select
Category:
Installation Guides
Filetype (size):
PDF
(1.77 MB)
Select: