Frame light barriers OGWSD-OGWTI
Frame light barriers
OGWSD / OGWTI with IO-Link
Several benefits combined
Frame light barriers from di-soric can be installed quickly and are immediately operational due to perfect alignment and the calibration of transmitter and receiver. They also detect very quickly moving objects independent of position in the entire detection range and are ideally suited for counting processes and for range detection.
No application gets left out
Due to the variety of sizes and formats, the high resolution and ultra-fast reaction time, our frame light barriers make optimal, process-reliable solutions possible - always tailored to the application and the installation space available.
Universal use possible
Both series convince with high flexibility in many application fields by static and dynamic object detection, sensor modes and IO-Link.
Sustainably durable
di-soric frame light barriers are also characterized by exceptionally stable metal housing and connectors and high protection class IP67.
- Special advantages and features
- Sensor modes and smart functions
- Fields of application and advantages
- Benefits, design and sizes
- Application examples
- Benefits, design and sizes
- Application examples
Special advantages
and features
Series
OGWTI
OGWSD
Assembly and handling technology, packaging technology, measurement and testing
Assembly and handling technology, packaging technology, machine tools, rubber and plastics
Ideal for Industry 4.0
System designs
Frame light barriers with IO-Link
Frame light barriers are conventionally used to detect falling objects, usually in counting applications. With the 4 sensor modes of the OGWSD and OGWTI, new, additional application fields are made possible.
4 sensor modes through IO-Link for maximum flexibility
Static
For the detection of falling objects, position-independent presence check of objects
Dynamic
Ideal for the detection of very small, falling objects, very process-reliable, high functional reserve in case of soiled optics, detection of objects guided in a tube
Shading
only via IO-LinkEvaluation of light intensity at receiver for feature check, position check and presence check
Peak value
only via IO-LinkEvaluation of maximum shading of falling objects for verification and differentiation of falling objects
Supportive, smart IO-Link functions for frame light barriers
Diagnostic function Stability
Shows when object detection is impaired, for example due to soiling. After cleaning and sufficient functional reliability established, the status bit is reset.
Calibration
in installation situationWith this function, the sensor in the mechanical installation situation is calibrated to the measured value 0. With the calibration, the influence of reflections can be minimized – small objects can thereby be better detected under critical installation situations.
Autoteach
This function is available for learning falling objects.
Process value zone
Zone in which a falling object was detected - up to 4 zones, depending on size.
Application fields and benefits
via IO-Link
More than counting – 1 sensor for 8 application fields
Because of IO-Link configurations precisely matched to the application fields, the versatile frame light barriers in the OGWTI and OGWSD series will win you over in many different detection and checking tasks.
di-soric Produkte und ihre IO-Link Vorteile
Für mehr Information zum Aktionsprodukt des Tages: Klick auf Aktionsrabatt
(Sensor mode: static)
(Sensor mode: dynamic)
(Sensor mode: peak value)
(Sensor mode: peak value)
(IO-Link: process value)
(Sensor mode: shading)
Frame light barriers
OGWSD with IO-Link
The robust, fast series with an activation time of 0.05 ms for conveyor technology – can be immediately installed and operational
The robust OGSWD in the frame design are range sensors that recognize objects independent of object position in the detection range. They are eminently suited for the detection of very small parts. The multifunctionality of the OGWSD series is expanded with the additional sensor modes for detection of submersing objects and for differentiation and verification of larger objects.
Frame format with removable crossbar
for more flexibility in the applications
No blind zone
The mechanical recess matches the detection range
Impact protection
Extremely resistant, resilient protection of optics from damage
Position-independent object detection
Easy handling and commissioning
Dual operating concept
Via 4 potentiometers and IO-Link
Operating elements
- Sensitivity
- Static / dynamic
- NO / NC
- Switch-off delay
Activation time 0.05 ms - independent of size
Ideal for the recognition of very quickly falling objects in highly dynamic processes
Recognition of objects from Ø 0,7 mm (depending on size)
Small, falling objects can be recognized process-reliably in the entire detection range of the OGWSD with the "dynamic" sensor mode, even in case of soiling
IO-Link - Ready for digitization
Sensor identification, configuration and diagnosis, remote maintenance option, quick exchange of sensor due to parameter storage in IO-Link master
4 sensor modes: new application fields for frame light barriers
In addition to the recognition of falling objects, the OGWSD is suited for feature, presence and position checks within the detection range
Connection
Connector M8, 3-pin, compatible with market standard and predecessor products
Push-pull output
pnp or npn function in one device
Always
in the frame
The right size for any application
7 sizes with detection ranges from a minimum of 25 x 22 mm to a maximum of 300 x 398 mm ensure that the OGWSD can provide the appropriate frame for any application.
Compact design with small dimensions
- Robust metal housing in frame design with impact protection for the optics, durable in operation with extremely high mechanical stresses
- Optimal ratio between housing width and detection range
- Narrow crossbar
- Operating elements and connectors oriented in the center for easier assembly
- Drilling distances and detection ranges identical to predecessor products
- Depth only 15 mm
Application examples
OGWSD
Frame
light barriers
OGWTI with IO-Link
The compact, fast series with an activation time of 0.05 ms for integrating assembly machinery – can be immediately installed and operational
The compact OGWTI in the fork design are range sensors that recognize objects independent of object position in the detection range. They are eminently suited for the detection of very small parts. The multifunctionality of the OGWTI series is expanded with the additional sensor modes for detection of submersing objects and for differentiation and verification of larger objects.
Open fork format
Plenty of room for numerous possible solutions
Practically no blind spots
Object detection already a few millimeters from the front edge of the leg
Compact size
Little space required - optimized for installation in machinery
Position-independent object detection
Easy handling and commissioning
Dual operating concept
Via membrane keypad and IO-Link
Membrane keypad for setting on the sensor
- Teach
- Sensitivity
- Static / dynamic
- NO / NC
- Calibration in installation situation
Activation time 0.05 ms - independent of size
Ideal for the recognition of very quickly falling objects in highly dynamic processes
Recognition of objects from Ø 0,7 mm (depending on size)
Small, falling objects can be recognized process-reliably in the entire detection range of the OGWTI with the dynamic sensor mode, even in case of soiling
IO-Link - Ready for digitization
Sensor identification, configuration and diagnosis, remote maintenance option, quick exchange of sensor due to parameter storage in IO-Link master
4 sensor modes: new application fields for frame light barriers
In addition to the recognition of falling objects, the OGWTI is suited for feature, presence and position checks within the detection range
Connection
Connector M8, 4-pin (up to 2 switching outputs)
Push-pull output
pnp or npn function in one device
Push-pull output
pnp or npn function in one device
1 Multifunction input or 2 switching outputs
Maximum flexibility with inputs and outputs - e.g. for signaling soiling, parallel operation
An open
end
Extensive room for numerous possible solutions
4 sizes with the detection ranges from a minimum of 30 x 30 mm to a maximum of 100 x 100 mm ensure that the OGWTI can find their place in any frame light barrier application in machinery.
Slim design with small dimensions
- Compact metal housing in a small size: Robust, small design, ideal for integration in compact machinery
- Width of the central portion only 34 mm in all sizes
- Operating elements and connectors oriented in the center for easier assembly
- Thickness and leg width each only 12 mm for easy integration in assembly machinery
Application examples
OGWTI
Sample order / Appointment
Download
Order and test samples now!
Test our frame light barriers and many other solutions free of charge and see for yourself for 28 days.