-
- EN
Retroreflective sensor O-50
LLRV 51 M 500 P3K-TSSL
Article Number: 203049
The transmitter and receiver are in one housing. The emitted light is reflected back by a reflector and evaluated in the retro reflective sensor. Polarization filters also allow the detection of reflecting objects. Retro reflective sensors make long ranges possible, with simple assembly and a high degree of system availability.
- Fan-shaped laser beam with auto-collimation principle
- Detection of smallest parts within the entire active zone
- Red-light laser
- 4-turn potentiometer
- Robust metal housing
Your price: Login
Service voltage
10 … 35 V DC
No-load current (max.)
30 mA
Insulation voltage endurance
500 V
Housing dimensions
50 x 40 x 15 mm
Housing length
40 mm
Housing height
50 mm
Housing width
15 mm
Housing material
Die-cast zinc (Black, painted)
Material
PMMA (Window)
Protection class
III, operation on protective low voltage
Operating principle
Retroreflective sensor
Evaluation
digital
Design
Cuboid design
Switching output
pnp, 200 mA, NO/NC, switchable
Light source
Laser
Laser class
1 (IEC 60825-1)
Color
red
Wavelength
670 nm
Modulation
Clocked
Ambient light immunity
15 kLx
Range
50 … 500 mm
Resolution
25.0 … 100 % (Light band cover)
Sensitivity adjustment
Potentiometer
Switching frequency
750 Hz
Ambient temperature during operation
+5 … +50 °C
Protection type
IP 67
Connection
Connector, M8, 3-pin
Connection cable
TK …
Product
Connection
Design
Line length (mm)
Wire cross-section (mm²)
Protection type
The search found 5 hits
Title
Category
Filetype (size)
Select
Category:
Installation Guides
Filetype (size):
PDF
(427.52 KB)
Select:
Category:
Data sheets
Filetype (size):
PDF
(2.06 MB)
Select:
Title:
REACH Art. 33 Lichtschranken
Category:
Certificates - Declarations
Filetype (size):
PDF
(472.35 KB)
Select: