-
- EN
Inductive ring sensor IRD
IR 6 NSOK-IBS
Article Number: 203774
The inductive standard ring sensors in the IR series detect the smallest metallic parts with certainty.
They are available in Ø 6.1 mm to 151.0 mm models and are well suited for quickly supplied parts.
- High resolution
- Short activation time
- Sensitivity and pulse stretching adjustable
- Resistant to dirt
- Static operating principle
- Metal connector
- High protection type
Service voltage
10 … 35 V DC (Supply Class 2)
No-load current (max.)
11 mA
Voltage drop (max.)
2,0 V
Insulation voltage endurance
1.000 V
Internal diameter
6,1 mm
Assembly distance to metal (min.)
5 mm
Housing material
Plastic (PA)
Material
POM (Ring)
Protection class
III, operation on protective low voltage
Operating principle
Static
Switching output
npn, 200 mA, NO/NC, switchable
Pulse stretching
10 … 150 ms adjustable
Resolution
Ø 1,0 mm
Sensitivity adjustment
Potentiometer
Speed of parts (max.)
35 m/s
Activation time
0,50 ms
Release time
10 ms
Ambient temperature during operation
-25 … +70 °C
Protection type
IP 67
Connection
Connector, M12, 4-pin
Connection cable
VK …
Product
Connection
Design
Line length (mm)
Wire cross-section
Protection type
Results found: 4
Preview
Title
Category
Format
Select
Preview:
Title:
203774_bpz_IR_6_NSOK-IBS
Category:
Installation Guides
Format:
PDF
(473.58 KB)
Select: