-
- EN
Dark field light
BEK 1-D120-G0TI-IBS
Article Number: 204983
Dark field lights are used to increase contrast in case of surface defects, while the coupling of light is performed transversely to the camera’s line of sight. They are available in all relevant color temperatures and are distinguished by features such as trigger inversion and brightness adjustment.
- To detect the finest changes in surface
- Constant level of light intensity over the entire voltage range
- Homogeneous illumination
- Protection class IP 67
- Low levels of heat produced
- External trigger input
- High efficiency
- Light intensity can be adjusted
- Sturdy housing design
Service voltage
10 … 35 V DC (Supply Class 2)
No-load current (max.)
200 mA (24 V DC)
Power
5,0 W (24 V DC)
Inverse polarity protection
Yes
Insulation voltage endurance
500 V
Illuminated area
Ø 120 mm
Housing dimensions
170 x 200 x 15 mm
Diameter
Ø 120 mm (Diameter)
Housing material
Aluminum (Black, Anodized)
Protection class
III, operation on protective low voltage
Risk group (DIN EN 62471)
Free group
Design
Dark field light
Characteristics
Trigger input
Trigger input high level
3,3 … 35,0 V
Trigger input low level
< 2,8 V
Light source
LED
Color
Infrared
Wavelength
870 nm
Deflection angle FWHM
30°
Control
Integrated power control
Display
LED Green - Operating display
On-delay time (Trig.)
0,250 ms
Switch off delay (Trig.)
0,050 ms
Shock/vibration load
10 … 55 Hz / 1,0 mm / 30 g
Ambient temperature during operation
0 … +50 °C
Protection type
IP 67
Connection
Connector, M12, 3-pin
Connection cable
VK …
Product
Series
Component
Diameter Mounting pin / boring
Housing material
Results found: 6
Preview
Title
Category
Format
Select
Category:
Installation Guides
Format:
PDF
(632.2 KB)
Select:
Category:
Data sheets
Format:
PDF
(1.12 MB)
Select: