-
- EN
Color sensor
FS 12-50 M G3-B8
Article Number: 205450
The FS-50 color sensor with a fiber optic connection or fixed optics can store up to 15 colors. Colors and tolerances are learned via a keypad with Multiteach. Some variants of the FS-50 series can be reproducibly configured via PC software.
- 4-channel, teach-in for many standard applications
- 15 channels with binary coding
- Very short response time
- Adjustable color tolerance
- High ambient light compensation
- Further settings possible via interface
- Integrated long-term stability
- Distinction of smallest shade nuances
- Parameterization by keys and software
Your price: Login
Service voltage
18 … 28 V DC
No-load current (max.)
500 mA
Housing dimensions
50 x 50 x 21 mm
Housing length
21 mm
Housing height
50 mm
Housing width
50 mm
Fiber-optic cable connection / fixed optics
M18 x 1
Housing material
Aluminum (Anodized)
Protection class
III, operation on protective low voltage
Operating mode
- Continuous
- External triggering
- Externally triggered color sequence detection
- External teaching
- Self-luminous objects
- Body colors
- Each color can be assigned to any output
Color memory internal
100
Number of measuring channels
1
Color channels of sensor
- 4 (Teachable via keys)
- 15 (Evaluation using software, with binary coding)
Color space mode
- XYZ / xyY / u’v’L* / L*a*b* / xyl (Body colors)
- XYZ / xyY / u’v’L / xyl (Self-luminous objects)
Detection modes
- Minimum spacing (Assignment of the measured color to the stored color with the smallest color difference)
- Check sphere (Check whether the measured color is within a specified tolerance)
- Check cylinder (Check whether the measured color is within a specified tolerance)
Trigger input
TRG 0
Teach input
TRG 1
Switching output
pnp+npn (4x), NO/NC
Voltage drop (max.)
2 V
Interface
RS232
Pulse stretching
0 … 65.535 ms adjustable
Switching output coding
- binary coded = 15 switching conditions (4x)
- pnp + npn (4x)
Light source
LED (can be switched off)
Color
White
Light spot size
Dependent on focus optics
Color resolution
DE Lab < 1
Ambient light compensation
dynamic, can be switched off
Range
Dependent on fiber-optic cable
Switching hysteresis (max.)
0 … 255 % (10 % default)
Tolerance ranges
5 selectable by keys / using software
Operating elements
3
Display
LED (Channel state (4x), programming (5x))
Response time / scanning frequency
- 0,2 ms (bei 5.000 Hz: bis zu 100 Farben auswertbar)
- 0,1 ms (bei 10.000 Hz: bis zu 30 Farben auswertbar)
- 0,05 ms (bei 20.000 Hz: 3 Farben auswählbar)
Response time
0,05 ms
Release time
< 20 000 Hz
Ambient temperature during operation
-10 … +55 °C
Protection type
IP 54
Connection
Connector, M9, 8-pin
Product
Component
Operation with
The search found 10 hits
Title
Category
Filetype (size)
Select
Title:
EU-DoC_1007-01
Category:
Certificates - Declarations
Filetype (size):
PDF
(309.13 KB)
Select:
Title:
SW_FS-Tool_V2_2
Category:
Software Industrial Protocol Manuals
Filetype (size):
PDF
(1.13 MB)
Select:
Title:
UK-DoC_2007-01
Category:
Certificates - Declarations
Filetype (size):
PDF
(273.74 KB)
Select: