-
- EN
Accessories for image processing & identification
BC-100-20A
Article Number: 207116
In the area of electrical accessories, we offer flash controllers and 4-way distributors with individually switchable M12 sockets for our image processing lights.
- Controlled flash mode for LED lights
- Simple and fast setup with RS485/USB/PC
- Trigger input for external control
- Adjustable trigger delay
- Max. pulse current 20 A
- Pulse times can be adjusted between 10 µs and 50 ms
- Strobe function up to 10 kHz
- Constant current of up to 1.8 A
- Standby output
- Trigger output for camera systems and peripheral devices
Your price: Login
Service voltage
24 V DC (± 1V)
Inverse polarity protection
In pairs by terminal group
Short-circuit protection
In pairs by terminal group
Average / peak power consumption
< 2.5 A / 6.0 A
LED constant current (configurable)
0.1 … 1.8 A
LED pulse current (configurable)
0.1 … 20.0 A
Input power
< 55 W (24 V DC)
Housing material
Aluminum (Anodized) / Plastic (PA, 6.6 FR)
Protection class
III, operation on protective low voltage
Component
Flash controller for flashable lighting
Number of channels
1
Trigger input
5 … 24 V DC (Potential-free, optical coupler)
Interface
RS485
Trigger output
push-pull, pnp (12 V DC), npn (30 V DC), configurable, <150 mA
Display
LED Green - Operation, yellow - Flash, Red - Interference
Pulse duration (configurable)
0.01 … 50 ms
Pulse cycle time (configurable)
100 µs … 60 s
Pulse delay (configurable)
> 50 µs (0 … 2 A) / > 5 µs (2 … 20 A)
Shock/vibration load
30 g, 11 ms / 10 … 55 Hz, 1.0 mm
Ambient temperature during operation
0 … +40 °C
Protection type
IP 40
Connection
Terminal strip, 12-pin
The search found 10 hits
Title
Category
Filetype (size)
Select
Title:
EU-DoC_1024-02
Category:
Certificates - Declarations
Filetype (size):
PDF
(314.51 KB)
Select:
Title:
UK-DoC_2024-02
Category:
Certificates - Declarations
Filetype (size):
PDF
(274.71 KB)
Select: