ISO-10303-21;
HEADER;
FILE_DESCRIPTION((''),'2;1');
FILE_NAME('LAD4_ASM','2014-02-26T',('dandrea'),('REER'),
'PRO/ENGINEER BY PARAMETRIC TECHNOLOGY CORPORATION, 2013320',
'PRO/ENGINEER BY PARAMETRIC TECHNOLOGY CORPORATION, 2013320','');
FILE_SCHEMA(('CONFIG_CONTROL_DESIGN'));
ENDSEC;
DATA;
#1=DIRECTION('',(-3.420201432408E-1,9.396926208168E-1,1.531757137070E-13));
#2=VECTOR('',#1,3.000686734673E-1);
#3=CARTESIAN_POINT('',(2.268491724004E2,1.423744180219E2,2.E0));
#4=LINE('',#3,#2);
#5=CARTESIAN_POINT('',(2.285353812688E2,1.435892060318E2,0.E0));
#6=CARTESIAN_POINT('',(2.283865950079E2,1.434894697959E2,1.439864525548E-14));
#7=CARTESIAN_POINT('',(2.280940662041E2,1.433053647852E2,4.218348224415E-2));
#8=CARTESIAN_POINT('',(2.276429059669E2,1.430567830301E2,2.526292988042E-1));
#9=CARTESIAN_POINT('',(2.273988342054E2,1.429385500017E2,4.621152357317E-1));
#10=CARTESIAN_POINT('',(2.272862472806E2,1.428862896265E2,5.857864391976E-1));
#12=DIRECTION('',(0.E0,0.E0,-1.E0));
#13=VECTOR('',#12,1.17E2);
#14=CARTESIAN_POINT('',(2.320579347481E2,1.543777006898E2,1.17E2));
#15=LINE('',#14,#13);
#16=DIRECTION('',(0.E0,0.E0,1.E0));
#17=VECTOR('',#16,1.13E2);
#18=CARTESIAN_POINT('',(2.267465428697E2,1.426563903401E2,2.E0));
#19=LINE('',#18,#17);
#20=CARTESIAN_POINT('',(2.272862472806E2,1.428862896265E2,5.857864391976E-1));
#21=CARTESIAN_POINT('',(2.271742024692E2,1.428342808884E2,7.088621577191E-1));
#22=CARTESIAN_POINT('',(2.269825031536E2,1.427505683538E2,9.773030793584E-1));
#23=CARTESIAN_POINT('',(2.267866678786E2,1.426717479971E2,1.485139143629E0));
#24=CARTESIAN_POINT('',(2.267465428697E2,1.426563903401E2,1.824405346277E0));
#25=CARTESIAN_POINT('',(2.267465428697E2,1.426563903401E2,2.E0));
#27=DIRECTION('',(-3.420201432408E-1,9.396926208168E-1,0.E0));
#28=VECTOR('',#27,3.086685068057E-1);
#29=CARTESIAN_POINT('',(2.286409521158E2,1.432991525137E2,0.E0));
#30=LINE('',#29,#28);
#31=CARTESIAN_POINT('',(2.234127626369E2,1.512311153712E2,0.E0));
#32=DIRECTION('',(0.E0,0.E0,-1.E0));
#33=DIRECTION('',(9.107064289131E-1,-4.130542341344E-1,0.E0));
#34=AXIS2_PLACEMENT_3D('',#31,#32,#33);
#36=CARTESIAN_POINT('',(2.234127626369E2,1.512311153712E2,0.E0));
#37=DIRECTION('',(0.E0,0.E0,-1.E0));
#38=DIRECTION('',(9.396926207851E-1,3.420201433278E-1,0.E0));
#39=AXIS2_PLACEMENT_3D('',#36,#37,#38);
#41=DIRECTION('',(3.420201433229E-1,-9.396926207869E-1,0.E0));
#42=VECTOR('',#41,8.173171569953E0);
#43=CARTESIAN_POINT('',(2.295444532226E2,1.621605757455E2,0.E0));
#44=LINE('',#43,#42);
#45=CARTESIAN_POINT('',(2.347127626369E2,1.640416865338E2,0.E0));
#46=DIRECTION('',(0.E0,0.E0,1.E0));
#47=DIRECTION('',(-9.848077530122E-1,-1.736481776669E-1,0.E0));
#48=AXIS2_PLACEMENT_3D('',#45,#46,#47);
#50=CARTESIAN_POINT('',(2.347127626369E2,1.640416865338E2,0.E0));
#51=DIRECTION('',(0.E0,0.E0,1.E0));
#52=DIRECTION('',(-1.E0,0.E0,0.E0));
#53=AXIS2_PLACEMENT_3D('',#50,#51,#52);
#55=CARTESIAN_POINT('',(2.347127626369E2,1.640416865338E2,0.E0));
#56=DIRECTION('',(0.E0,0.E0,-1.E0));
#57=DIRECTION('',(-9.848077530122E-1,-1.736481776669E-1,0.E0));
#58=AXIS2_PLACEMENT_3D('',#55,#56,#57);
#60=CARTESIAN_POINT('',(2.347127626369E2,1.640416865338E2,0.E0));
#61=DIRECTION('',(0.E0,0.E0,-1.E0));
#62=DIRECTION('',(-9.396926207862E-1,-3.420201433248E-1,0.E0));
#63=AXIS2_PLACEMENT_3D('',#60,#61,#62);
#65=DIRECTION('',(-3.420201433229E-1,9.396926207869E-1,0.E0));
#66=VECTOR('',#65,8.173171569956E0);
#67=CARTESIAN_POINT('',(2.320579347481E2,1.543777006898E2,0.E0));
#68=LINE('',#67,#66);
#69=CARTESIAN_POINT('',(2.234127626369E2,1.512311153712E2,0.E0));
#70=DIRECTION('',(0.E0,0.E0,1.E0));
#71=DIRECTION('',(9.108481883325E-1,-4.127415387521E-1,0.E0));
#72=AXIS2_PLACEMENT_3D('',#69,#70,#71);
#74=CARTESIAN_POINT('',(2.234127626369E2,1.512311153712E2,0.E0));
#75=DIRECTION('',(0.E0,0.E0,1.E0));
#76=DIRECTION('',(5.568063730424E-1,-8.306423194970E-1,0.E0));
#77=AXIS2_PLACEMENT_3D('',#74,#75,#76);
#79=CARTESIAN_POINT('',(2.268491724004E2,1.423744180219E2,2.E0));
#80=CARTESIAN_POINT('',(2.268491724004E2,1.423744180219E2,1.824448337739E0));
#81=CARTESIAN_POINT('',(2.268892846279E2,1.423897468713E2,1.485239003535E0));
#82=CARTESIAN_POINT('',(2.270851623949E2,1.424683418887E2,9.773981608720E-1));
#83=CARTESIAN_POINT('',(2.272770243280E2,1.425516716819E2,7.088992566747E-1));
#84=CARTESIAN_POINT('',(2.273892176996E2,1.426033807247E2,5.857864390035E-1));
#86=DIRECTION('',(0.E0,0.E0,-1.E0));
#87=VECTOR('',#86,1.13E2);
#88=CARTESIAN_POINT('',(2.268491724004E2,1.423744180219E2,1.15E2));
#89=LINE('',#88,#87);
#90=CARTESIAN_POINT('',(2.273892176996E2,1.426033807247E2,1.164142135610E2));
#91=CARTESIAN_POINT('',(2.272770242752E2,1.425516716575E2,1.162911006854E2));
#92=CARTESIAN_POINT('',(2.270851622985E2,1.424683418486E2,1.160226016751E2));
#93=CARTESIAN_POINT('',(2.268892845882E2,1.423897468561E2,1.155147608067E2));
#94=CARTESIAN_POINT('',(2.268491724004E2,1.423744180219E2,1.151755515802E2));
#95=CARTESIAN_POINT('',(2.268491724004E2,1.423744180219E2,1.15E2));
#97=CARTESIAN_POINT('',(2.286409521158E2,1.432991525137E2,1.17E2));
#98=CARTESIAN_POINT('',(2.284916180051E2,1.432007220192E2,1.17E2));
#99=CARTESIAN_POINT('',(2.281982346052E2,1.430188572058E2,1.169577871397E2));
#100=CARTESIAN_POINT('',(2.277462584541E2,1.427727149280E2,1.167473407752E2));
#101=CARTESIAN_POINT('',(2.275019167090E2,1.426553228121E2,1.165378812287E2));
#102=CARTESIAN_POINT('',(2.273892176996E2,1.426033807247E2,1.164142135610E2));
#104=DIRECTION('',(0.E0,0.E0,1.E0));
#105=VECTOR('',#104,1.17E2);
#106=CARTESIAN_POINT('',(2.323398425343E2,1.544803067328E2,0.E0));
#107=LINE('',#106,#105);
#108=CARTESIAN_POINT('',(2.273892176996E2,1.426033807247E2,5.857864390035E-1));
#109=CARTESIAN_POINT('',(2.275019172338E2,1.426553230539E2,4.621181954901E-1));
#110=CARTESIAN_POINT('',(2.277462599212E2,1.427727156599E2,2.526581945520E-1));
#111=CARTESIAN_POINT('',(2.281982362338E2,1.430188581678E2,4.221244705593E-2));
#112=CARTESIAN_POINT('',(2.284916186873E2,1.432007224689E2,1.439267162166E-14));
#113=CARTESIAN_POINT('',(2.286409521158E2,1.432991525137E2,0.E0));
#115=DIRECTION('',(3.420201432407E-1,-9.396926208168E-1,4.735867476933E-14));
#116=VECTOR('',#115,3.000686734673E-1);
#117=CARTESIAN_POINT('',(2.267465428697E2,1.426563903401E2,1.15E2));
#118=LINE('',#117,#116);
#119=CARTESIAN_POINT('',(2.272862472806E2,1.428862896265E2,1.164142135608E2));
#120=CARTESIAN_POINT('',(2.271767975276E2,1.428354854574E2,1.162939883864E2));
#121=CARTESIAN_POINT('',(2.269812032898E2,1.427499727690E2,1.160207422548E2));
#122=CARTESIAN_POINT('',(2.267869634558E2,1.426718780035E2,1.155170277290E2));
#123=CARTESIAN_POINT('',(2.267465428697E2,1.426563903401E2,1.151714437599E2));
#124=CARTESIAN_POINT('',(2.267465428697E2,1.426563903401E2,1.15E2));
#126=CARTESIAN_POINT('',(2.285353812688E2,1.435892060318E2,1.17E2));
#127=CARTESIAN_POINT('',(2.283890973471E2,1.434911471947E2,1.17E2));
#128=CARTESIAN_POINT('',(2.280906113559E2,1.433032546084E2,1.169570672311E2));
#129=CARTESIAN_POINT('',(2.276430477006E2,1.430568879413E2,1.167476797004E2));
#130=CARTESIAN_POINT('',(2.273957502620E2,1.429371185030E2,1.165344972040E2));
#131=CARTESIAN_POINT('',(2.272862472806E2,1.428862896265E2,1.164142135608E2));
#133=DIRECTION('',(3.420201432408E-1,-9.396926208168E-1,0.E0));
#134=VECTOR('',#133,3.086685068056E-1);
#135=CARTESIAN_POINT('',(2.285353812688E2,1.435892060318E2,1.17E2));
#136=LINE('',#135,#134);
#137=CARTESIAN_POINT('',(2.234127626369E2,1.512311153712E2,1.17E2));
#138=DIRECTION('',(0.E0,0.E0,-1.E0));
#139=DIRECTION('',(9.108481883325E-1,-4.127415387521E-1,0.E0));
#140=AXIS2_PLACEMENT_3D('',#137,#138,#139);
#142=CARTESIAN_POINT('',(2.234127626369E2,1.512311153712E2,1.17E2));
#143=DIRECTION('',(0.E0,0.E0,-1.E0));
#144=DIRECTION('',(9.396926207851E-1,3.420201433278E-1,0.E0));
#145=AXIS2_PLACEMENT_3D('',#142,#143,#144);
#147=DIRECTION('',(3.420201433229E-1,-9.396926207869E-1,0.E0));
#148=VECTOR('',#147,8.173171569956E0);
#149=CARTESIAN_POINT('',(2.292625454363E2,1.620579697025E2,1.17E2));
#150=LINE('',#149,#148);
#151=CARTESIAN_POINT('',(2.347127626369E2,1.640416865338E2,1.17E2));
#152=DIRECTION('',(0.E0,0.E0,1.E0));
#153=DIRECTION('',(-9.848077530122E-1,-1.736481776669E-1,0.E0));
#154=AXIS2_PLACEMENT_3D('',#151,#152,#153);
#156=CARTESIAN_POINT('',(2.347127626369E2,1.640416865338E2,1.17E2));
#157=DIRECTION('',(0.E0,0.E0,1.E0));
#158=DIRECTION('',(-1.E0,-1.715103155283E-13,0.E0));
#159=AXIS2_PLACEMENT_3D('',#156,#157,#158);
#161=CARTESIAN_POINT('',(2.347127626369E2,1.640416865338E2,1.17E2));
#162=DIRECTION('',(0.E0,0.E0,-1.E0));
#163=DIRECTION('',(-9.848077530122E-1,-1.736481776669E-1,0.E0));
#164=AXIS2_PLACEMENT_3D('',#161,#162,#163);
#166=CARTESIAN_POINT('',(2.347127626369E2,1.640416865338E2,1.17E2));
#167=DIRECTION('',(0.E0,0.E0,-1.E0));
#168=DIRECTION('',(-9.396926207859E-1,-3.420201433257E-1,0.E0));
#169=AXIS2_PLACEMENT_3D('',#166,#167,#168);
#171=DIRECTION('',(-3.420201433229E-1,9.396926207869E-1,0.E0));
#172=VECTOR('',#171,8.173171569953E0);
#173=CARTESIAN_POINT('',(2.323398425343E2,1.544803067328E2,1.17E2));
#174=LINE('',#173,#172);
#175=CARTESIAN_POINT('',(2.234127626369E2,1.512311153712E2,1.17E2));
#176=DIRECTION('',(0.E0,0.E0,1.E0));
#177=DIRECTION('',(9.107064289131E-1,-4.130542341344E-1,0.E0));
#178=AXIS2_PLACEMENT_3D('',#175,#176,#177);
#180=CARTESIAN_POINT('',(2.234127626369E2,1.512311153712E2,1.17E2));
#181=DIRECTION('',(0.E0,0.E0,1.E0));
#182=DIRECTION('',(5.503357346213E-1,-8.349434586838E-1,0.E0));
#183=AXIS2_PLACEMENT_3D('',#180,#181,#182);
#185=DIRECTION('',(0.E0,0.E0,1.E0));
#186=VECTOR('',#185,1.17E2);
#187=CARTESIAN_POINT('',(2.292625454363E2,1.620579697025E2,0.E0));
#188=LINE('',#187,#186);
#189=DIRECTION('',(0.E0,0.E0,-1.E0));
#190=VECTOR('',#189,1.17E2);
#191=CARTESIAN_POINT('',(2.289127626369E2,1.640416865338E2,1.17E2));
#192=LINE('',#191,#190);
#193=CARTESIAN_POINT('',(2.289127626369E2,1.752311153712E2,9.36E1));
#194=DIRECTION('',(1.E0,0.E0,0.E0));
#195=DIRECTION('',(0.E0,-1.E0,0.E0));
#196=AXIS2_PLACEMENT_3D('',#193,#194,#195);
#198=CARTESIAN_POINT('',(2.289127626369E2,1.752311153712E2,9.36E1));
#199=DIRECTION('',(1.E0,0.E0,0.E0));
#200=DIRECTION('',(0.E0,1.E0,0.E0));
#201=AXIS2_PLACEMENT_3D('',#198,#199,#200);
#203=CARTESIAN_POINT('',(2.289127626369E2,1.752311153712E2,7.02E1));
#204=DIRECTION('',(1.E0,0.E0,0.E0));
#205=DIRECTION('',(0.E0,-1.E0,0.E0));
#206=AXIS2_PLACEMENT_3D('',#203,#204,#205);
#208=CARTESIAN_POINT('',(2.289127626369E2,1.752311153712E2,7.02E1));
#209=DIRECTION('',(1.E0,0.E0,0.E0));
#210=DIRECTION('',(0.E0,1.E0,0.E0));
#211=AXIS2_PLACEMENT_3D('',#208,#209,#210);
#213=CARTESIAN_POINT('',(2.289127626369E2,1.752311153712E2,4.68E1));
#214=DIRECTION('',(1.E0,0.E0,0.E0));
#215=DIRECTION('',(0.E0,-1.E0,0.E0));
#216=AXIS2_PLACEMENT_3D('',#213,#214,#215);
#218=CARTESIAN_POINT('',(2.289127626369E2,1.752311153712E2,4.68E1));
#219=DIRECTION('',(1.E0,0.E0,0.E0));
#220=DIRECTION('',(0.E0,1.E0,0.E0));
#221=AXIS2_PLACEMENT_3D('',#218,#219,#220);
#223=CARTESIAN_POINT('',(2.289127626369E2,1.752311153712E2,2.34E1));
#224=DIRECTION('',(1.E0,0.E0,0.E0));
#225=DIRECTION('',(0.E0,-1.E0,0.E0));
#226=AXIS2_PLACEMENT_3D('',#223,#224,#225);
#228=CARTESIAN_POINT('',(2.289127626369E2,1.752311153712E2,2.34E1));
#229=DIRECTION('',(1.E0,0.E0,0.E0));
#230=DIRECTION('',(0.E0,1.E0,0.E0));
#231=AXIS2_PLACEMENT_3D('',#228,#229,#230);
#233=DIRECTION('',(0.E0,1.E0,0.E0));
#234=VECTOR('',#233,1.618942883740E1);
#235=CARTESIAN_POINT('',(2.289127626369E2,1.640416865338E2,1.17E2));
#236=LINE('',#235,#234);
#237=DIRECTION('',(0.E0,-1.E0,0.E0));
#238=VECTOR('',#237,1.618942883740E1);
#239=CARTESIAN_POINT('',(2.289127626369E2,1.802311153712E2,0.E0));
#240=LINE('',#239,#238);
#241=DIRECTION('',(-1.E0,0.E0,0.E0));
#242=VECTOR('',#241,3.E-1);
#243=CARTESIAN_POINT('',(2.292127626369E2,1.724811153712E2,9.36E1));
#244=LINE('',#243,#242);
#245=DIRECTION('',(-1.E0,0.E0,0.E0));
#246=VECTOR('',#245,3.E-1);
#247=CARTESIAN_POINT('',(2.292127626369E2,1.779811153712E2,9.36E1));
#248=LINE('',#247,#246);
#249=CARTESIAN_POINT('',(2.292127626369E2,1.752311153712E2,9.36E1));
#250=DIRECTION('',(-1.E0,0.E0,0.E0));
#251=DIRECTION('',(0.E0,-1.E0,0.E0));
#252=AXIS2_PLACEMENT_3D('',#249,#250,#251);
#254=CARTESIAN_POINT('',(2.292127626369E2,1.752311153712E2,9.36E1));
#255=DIRECTION('',(-1.E0,0.E0,0.E0));
#256=DIRECTION('',(0.E0,1.E0,0.E0));
#257=AXIS2_PLACEMENT_3D('',#254,#255,#256);
#259=CARTESIAN_POINT('',(2.292127626369E2,1.752311153712E2,7.02E1));
#260=DIRECTION('',(-1.E0,0.E0,0.E0));
#261=DIRECTION('',(0.E0,-1.E0,0.E0));
#262=AXIS2_PLACEMENT_3D('',#259,#260,#261);
#264=CARTESIAN_POINT('',(2.292127626369E2,1.752311153712E2,7.02E1));
#265=DIRECTION('',(-1.E0,0.E0,0.E0));
#266=DIRECTION('',(0.E0,1.E0,0.E0));
#267=AXIS2_PLACEMENT_3D('',#264,#265,#266);
#269=CARTESIAN_POINT('',(2.292127626369E2,1.752311153712E2,4.68E1));
#270=DIRECTION('',(-1.E0,0.E0,0.E0));
#271=DIRECTION('',(0.E0,-1.E0,0.E0));
#272=AXIS2_PLACEMENT_3D('',#269,#270,#271);
#274=CARTESIAN_POINT('',(2.292127626369E2,1.752311153712E2,4.68E1));
#275=DIRECTION('',(-1.E0,0.E0,0.E0));
#276=DIRECTION('',(0.E0,1.E0,0.E0));
#277=AXIS2_PLACEMENT_3D('',#274,#275,#276);
#279=CARTESIAN_POINT('',(2.292127626369E2,1.752311153712E2,2.34E1));
#280=DIRECTION('',(-1.E0,0.E0,0.E0));
#281=DIRECTION('',(0.E0,-1.E0,0.E0));
#282=AXIS2_PLACEMENT_3D('',#279,#280,#281);
#284=CARTESIAN_POINT('',(2.292127626369E2,1.752311153712E2,2.34E1));
#285=DIRECTION('',(-1.E0,0.E0,0.E0));
#286=DIRECTION('',(0.E0,1.E0,0.E0));
#287=AXIS2_PLACEMENT_3D('',#284,#285,#286);
#289=DIRECTION('',(0.E0,-1.E0,0.E0));
#290=VECTOR('',#289,1.618942883740E1);
#291=CARTESIAN_POINT('',(2.292127626369E2,1.802311153712E2,1.17E2));
#292=LINE('',#291,#290);
#293=DIRECTION('',(0.E0,0.E0,1.E0));
#294=VECTOR('',#293,1.17E2);
#295=CARTESIAN_POINT('',(2.292127626369E2,1.802311153712E2,0.E0));
#296=LINE('',#295,#294);
#297=DIRECTION('',(0.E0,1.E0,0.E0));
#298=VECTOR('',#297,1.618942883740E1);
#299=CARTESIAN_POINT('',(2.292127626369E2,1.640416865338E2,0.E0));
#300=LINE('',#299,#298);
#301=DIRECTION('',(-1.E0,0.E0,0.E0));
#302=VECTOR('',#301,3.E-1);
#303=CARTESIAN_POINT('',(2.292127626369E2,1.724811153712E2,7.02E1));
#304=LINE('',#303,#302);
#305=DIRECTION('',(-1.E0,0.E0,0.E0));
#306=VECTOR('',#305,3.E-1);
#307=CARTESIAN_POINT('',(2.292127626369E2,1.779811153712E2,7.02E1));
#308=LINE('',#307,#306);
#309=DIRECTION('',(-1.E0,0.E0,0.E0));
#310=VECTOR('',#309,3.E-1);
#311=CARTESIAN_POINT('',(2.292127626369E2,1.724811153712E2,4.68E1));
#312=LINE('',#311,#310);
#313=DIRECTION('',(-1.E0,0.E0,0.E0));
#314=VECTOR('',#313,3.E-1);
#315=CARTESIAN_POINT('',(2.292127626369E2,1.779811153712E2,4.68E1));
#316=LINE('',#315,#314);
#317=DIRECTION('',(-1.E0,0.E0,0.E0));
#318=VECTOR('',#317,3.E-1);
#319=CARTESIAN_POINT('',(2.292127626369E2,1.724811153712E2,2.34E1));
#320=LINE('',#319,#318);
#321=DIRECTION('',(-1.E0,0.E0,0.E0));
#322=VECTOR('',#321,3.E-1);
#323=CARTESIAN_POINT('',(2.292127626369E2,1.779811153712E2,2.34E1));
#324=LINE('',#323,#322);
#325=DIRECTION('',(1.E0,0.E0,0.E0));
#326=VECTOR('',#325,3.E-1);
#327=CARTESIAN_POINT('',(2.289127626369E2,1.802311153712E2,1.17E2));
#328=LINE('',#327,#326);
#329=DIRECTION('',(0.E0,0.E0,1.E0));
#330=VECTOR('',#329,1.17E2);
#331=CARTESIAN_POINT('',(2.289127626369E2,1.802311153712E2,0.E0));
#332=LINE('',#331,#330);
#333=DIRECTION('',(-1.E0,0.E0,0.E0));
#334=VECTOR('',#333,3.E-1);
#335=CARTESIAN_POINT('',(2.292127626369E2,1.802311153712E2,0.E0));
#336=LINE('',#335,#334);
#337=DIRECTION('',(0.E0,0.E0,1.E0));
#338=VECTOR('',#337,1.17E2);
#339=CARTESIAN_POINT('',(2.292127626369E2,1.640416865338E2,0.E0));
#340=LINE('',#339,#338);
#341=DIRECTION('',(0.E0,0.E0,-1.E0));
#342=VECTOR('',#341,1.17E2);
#343=CARTESIAN_POINT('',(2.295444532226E2,1.621605757455E2,1.17E2));
#344=LINE('',#343,#342);
#345=VERTEX_POINT('',#20);
#346=VERTEX_POINT('',#25);
#347=VERTEX_POINT('',#5);
#348=CARTESIAN_POINT('',(2.286409521158E2,1.432991525137E2,0.E0));
#349=VERTEX_POINT('',#348);
#350=CARTESIAN_POINT('',(2.268491724004E2,1.423744180219E2,2.E0));
#351=VERTEX_POINT('',#350);
#352=CARTESIAN_POINT('',(2.267465428697E2,1.426563903401E2,1.15E2));
#353=VERTEX_POINT('',#352);
#354=CARTESIAN_POINT('',(2.317925659695E2,1.474338932147E2,0.E0));
#355=VERTEX_POINT('',#354);
#356=CARTESIAN_POINT('',(2.320579347481E2,1.543777006898E2,0.E0));
#357=VERTEX_POINT('',#356);
#358=VERTEX_POINT('',#108);
#359=VERTEX_POINT('',#90);
#360=VERTEX_POINT('',#95);
#361=VERTEX_POINT('',#97);
#362=VERTEX_POINT('',#119);
#363=VERTEX_POINT('',#126);
#364=CARTESIAN_POINT('',(2.320579347481E2,1.543777006898E2,1.17E2));
#365=VERTEX_POINT('',#364);
#366=CARTESIAN_POINT('',(2.323398425343E2,1.544803067328E2,0.E0));
#367=CARTESIAN_POINT('',(2.320644737115E2,1.473071001469E2,0.E0));
#368=VERTEX_POINT('',#366);
#369=VERTEX_POINT('',#367);
#370=CARTESIAN_POINT('',(2.317925659695E2,1.474338932147E2,1.17E2));
#371=VERTEX_POINT('',#370);
#372=CARTESIAN_POINT('',(2.292625454363E2,1.620579697025E2,0.E0));
#373=VERTEX_POINT('',#372);
#374=CARTESIAN_POINT('',(2.295444532226E2,1.621605757455E2,0.E0));
#375=VERTEX_POINT('',#374);
#376=CARTESIAN_POINT('',(2.320644737115E2,1.473071001469E2,1.17E2));
#377=VERTEX_POINT('',#376);
#378=CARTESIAN_POINT('',(2.323398425343E2,1.544803067328E2,1.17E2));
#379=VERTEX_POINT('',#378);
#380=CARTESIAN_POINT('',(2.292625454363E2,1.620579697025E2,1.17E2));
#381=VERTEX_POINT('',#380);
#382=CARTESIAN_POINT('',(2.290008776694E2,1.630345271033E2,0.E0));
#383=VERTEX_POINT('',#382);
#384=CARTESIAN_POINT('',(2.289127626369E2,1.640416865338E2,0.E0));
#385=VERTEX_POINT('',#384);
#386=CARTESIAN_POINT('',(2.292127626369E2,1.640416865338E2,0.E0));
#387=CARTESIAN_POINT('',(2.292963199953E2,1.630866215566E2,0.E0));
#388=VERTEX_POINT('',#386);
#389=VERTEX_POINT('',#387);
#390=CARTESIAN_POINT('',(2.289127626369E2,1.802311153712E2,0.E0));
#391=VERTEX_POINT('',#390);
#392=CARTESIAN_POINT('',(2.292127626369E2,1.802311153712E2,0.E0));
#393=VERTEX_POINT('',#392);
#394=CARTESIAN_POINT('',(2.295444532226E2,1.621605757455E2,1.17E2));
#395=VERTEX_POINT('',#394);
#396=CARTESIAN_POINT('',(2.289127626369E2,1.640416865338E2,1.17E2));
#397=CARTESIAN_POINT('',(2.290008776694E2,1.630345271033E2,1.17E2));
#398=VERTEX_POINT('',#396);
#399=VERTEX_POINT('',#397);
#400=CARTESIAN_POINT('',(2.292127626369E2,1.640416865338E2,1.17E2));
#401=VERTEX_POINT('',#400);
#402=CARTESIAN_POINT('',(2.292963199953E2,1.630866215566E2,1.17E2));
#403=VERTEX_POINT('',#402);
#404=CARTESIAN_POINT('',(2.289127626369E2,1.802311153712E2,1.17E2));
#405=VERTEX_POINT('',#404);
#406=CARTESIAN_POINT('',(2.292127626369E2,1.802311153712E2,1.17E2));
#407=VERTEX_POINT('',#406);
#408=CARTESIAN_POINT('',(2.292127626369E2,1.724811153712E2,9.36E1));
#409=CARTESIAN_POINT('',(2.289127626369E2,1.724811153712E2,9.36E1));
#410=VERTEX_POINT('',#408);
#411=VERTEX_POINT('',#409);
#412=CARTESIAN_POINT('',(2.292127626369E2,1.779811153712E2,9.36E1));
#413=CARTESIAN_POINT('',(2.289127626369E2,1.779811153712E2,9.36E1));
#414=VERTEX_POINT('',#412);
#415=VERTEX_POINT('',#413);
#416=CARTESIAN_POINT('',(2.292127626369E2,1.724811153712E2,7.02E1));
#417=CARTESIAN_POINT('',(2.289127626369E2,1.724811153712E2,7.02E1));
#418=VERTEX_POINT('',#416);
#419=VERTEX_POINT('',#417);
#420=CARTESIAN_POINT('',(2.292127626369E2,1.779811153712E2,7.02E1));
#421=CARTESIAN_POINT('',(2.289127626369E2,1.779811153712E2,7.02E1));
#422=VERTEX_POINT('',#420);
#423=VERTEX_POINT('',#421);
#424=CARTESIAN_POINT('',(2.292127626369E2,1.724811153712E2,4.68E1));
#425=CARTESIAN_POINT('',(2.289127626369E2,1.724811153712E2,4.68E1));
#426=VERTEX_POINT('',#424);
#427=VERTEX_POINT('',#425);
#428=CARTESIAN_POINT('',(2.292127626369E2,1.779811153712E2,4.68E1));
#429=CARTESIAN_POINT('',(2.289127626369E2,1.779811153712E2,4.68E1));
#430=VERTEX_POINT('',#428);
#431=VERTEX_POINT('',#429);
#432=CARTESIAN_POINT('',(2.292127626369E2,1.724811153712E2,2.34E1));
#433=CARTESIAN_POINT('',(2.289127626369E2,1.724811153712E2,2.34E1));
#434=VERTEX_POINT('',#432);
#435=VERTEX_POINT('',#433);
#436=CARTESIAN_POINT('',(2.292127626369E2,1.779811153712E2,2.34E1));
#437=CARTESIAN_POINT('',(2.289127626369E2,1.779811153712E2,2.34E1));
#438=VERTEX_POINT('',#436);
#439=VERTEX_POINT('',#437);
#440=CARTESIAN_POINT('',(2.261524316397E2,1.501363063314E2,2.E0));
#441=DIRECTION('',(-3.420201432407E-1,9.396926208168E-1,0.E0));
#442=DIRECTION('',(-6.644630244105E-1,-2.418447625879E-1,-7.071067811865E-1));
#443=AXIS2_PLACEMENT_3D('',#440,#441,#442);
#444=CYLINDRICAL_SURFACE('',#443,2.E0);
#446=ORIENTED_EDGE('',*,*,#445,.T.);
#448=ORIENTED_EDGE('',*,*,#447,.F.);
#450=ORIENTED_EDGE('',*,*,#449,.T.);
#452=ORIENTED_EDGE('',*,*,#451,.T.);
#454=ORIENTED_EDGE('',*,*,#453,.T.);
#456=ORIENTED_EDGE('',*,*,#455,.T.);
#457=EDGE_LOOP('',(#446,#448,#450,#452,#454,#456));
#458=FACE_OUTER_BOUND('',#457,.F.);
#459=ADVANCED_FACE('',(#458),#444,.T.);
#460=CARTESIAN_POINT('',(2.234127626369E2,1.512311153712E2,0.E0));
#461=DIRECTION('',(0.E0,0.E0,-1.E0));
#462=DIRECTION('',(9.108481883325E-1,-4.127415387521E-1,0.E0));
#463=AXIS2_PLACEMENT_3D('',#460,#461,#462);
#464=CYLINDRICAL_SURFACE('',#463,9.199999999994E0);
#465=ORIENTED_EDGE('',*,*,#455,.F.);
#467=ORIENTED_EDGE('',*,*,#466,.T.);
#469=ORIENTED_EDGE('',*,*,#468,.T.);
#471=ORIENTED_EDGE('',*,*,#470,.F.);
#473=ORIENTED_EDGE('',*,*,#472,.T.);
#475=ORIENTED_EDGE('',*,*,#474,.T.);
#477=ORIENTED_EDGE('',*,*,#476,.T.);
#479=ORIENTED_EDGE('',*,*,#478,.T.);
#481=ORIENTED_EDGE('',*,*,#480,.F.);
#482=ORIENTED_EDGE('',*,*,#445,.F.);
#483=EDGE_LOOP('',(#465,#467,#469,#471,#473,#475,#477,#479,#481,#482));
#484=FACE_OUTER_BOUND('',#483,.F.);
#485=ADVANCED_FACE('',(#484),#464,.F.);
#486=CARTESIAN_POINT('',(2.296575556503E2,1.591082219332E2,0.E0));
#487=DIRECTION('',(0.E0,0.E0,1.E0));
#488=DIRECTION('',(1.E0,0.E0,0.E0));
#489=AXIS2_PLACEMENT_3D('',#486,#487,#488);
#490=PLANE('',#489);
#491=ORIENTED_EDGE('',*,*,#453,.F.);
#493=ORIENTED_EDGE('',*,*,#492,.F.);
#495=ORIENTED_EDGE('',*,*,#494,.F.);
#497=ORIENTED_EDGE('',*,*,#496,.F.);
#499=ORIENTED_EDGE('',*,*,#498,.F.);
#501=ORIENTED_EDGE('',*,*,#500,.F.);
#503=ORIENTED_EDGE('',*,*,#502,.T.);
#505=ORIENTED_EDGE('',*,*,#504,.T.);
#507=ORIENTED_EDGE('',*,*,#506,.T.);
#509=ORIENTED_EDGE('',*,*,#508,.F.);
#511=ORIENTED_EDGE('',*,*,#510,.F.);
#513=ORIENTED_EDGE('',*,*,#512,.F.);
#514=ORIENTED_EDGE('',*,*,#468,.F.);
#515=ORIENTED_EDGE('',*,*,#466,.F.);
#516=EDGE_LOOP('',(#491,#493,#495,#497,#499,#501,#503,#505,#507,#509,#511,#513,
#514,#515));
#517=FACE_OUTER_BOUND('',#516,.F.);
#518=ADVANCED_FACE('',(#517),#490,.F.);
#519=CARTESIAN_POINT('',(2.234127626369E2,1.512311153712E2,0.E0));
#520=DIRECTION('',(0.E0,0.E0,-1.E0));
#521=DIRECTION('',(9.107064289131E-1,-4.130542341344E-1,0.E0));
#522=AXIS2_PLACEMENT_3D('',#519,#520,#521);
#523=CYLINDRICAL_SURFACE('',#522,9.499999999994E0);
#524=ORIENTED_EDGE('',*,*,#449,.F.);
#526=ORIENTED_EDGE('',*,*,#525,.F.);
#528=ORIENTED_EDGE('',*,*,#527,.F.);
#530=ORIENTED_EDGE('',*,*,#529,.F.);
#532=ORIENTED_EDGE('',*,*,#531,.T.);
#534=ORIENTED_EDGE('',*,*,#533,.T.);
#536=ORIENTED_EDGE('',*,*,#535,.F.);
#537=ORIENTED_EDGE('',*,*,#494,.T.);
#538=ORIENTED_EDGE('',*,*,#492,.T.);
#539=ORIENTED_EDGE('',*,*,#451,.F.);
#540=EDGE_LOOP('',(#524,#526,#528,#530,#532,#534,#536,#537,#538,#539));
#541=FACE_OUTER_BOUND('',#540,.F.);
#542=ADVANCED_FACE('',(#541),#523,.T.);
#543=CARTESIAN_POINT('',(2.267465428697E2,1.426563903401E2,0.E0));
#544=DIRECTION('',(9.396926208168E-1,3.420201432407E-1,0.E0));
#545=DIRECTION('',(0.E0,0.E0,-1.E0));
#546=AXIS2_PLACEMENT_3D('',#543,#544,#545);
#547=PLANE('',#546);
#548=ORIENTED_EDGE('',*,*,#447,.T.);
#549=ORIENTED_EDGE('',*,*,#480,.T.);
#551=ORIENTED_EDGE('',*,*,#550,.T.);
#552=ORIENTED_EDGE('',*,*,#525,.T.);
#553=EDGE_LOOP('',(#548,#549,#551,#552));
#554=FACE_OUTER_BOUND('',#553,.F.);
#555=ADVANCED_FACE('',(#554),#547,.F.);
#556=CARTESIAN_POINT('',(2.286772428767E2,1.431994444675E2,1.15E2));
#557=DIRECTION('',(3.420201432407E-1,-9.396926208168E-1,0.E0));
#558=DIRECTION('',(-6.644630244105E-1,-2.418447625879E-1,7.071067811866E-1));
#559=AXIS2_PLACEMENT_3D('',#556,#557,#558);
#560=CYLINDRICAL_SURFACE('',#559,2.E0);
#561=ORIENTED_EDGE('',*,*,#527,.T.);
#562=ORIENTED_EDGE('',*,*,#550,.F.);
#563=ORIENTED_EDGE('',*,*,#478,.F.);
#564=ORIENTED_EDGE('',*,*,#476,.F.);
#566=ORIENTED_EDGE('',*,*,#565,.T.);
#567=ORIENTED_EDGE('',*,*,#529,.T.);
#568=EDGE_LOOP('',(#561,#562,#563,#564,#566,#567));
#569=FACE_OUTER_BOUND('',#568,.F.);
#570=ADVANCED_FACE('',(#569),#560,.T.);
#571=CARTESIAN_POINT('',(2.268491724004E2,1.423744180219E2,1.17E2));
#572=DIRECTION('',(0.E0,0.E0,1.E0));
#573=DIRECTION('',(1.E0,0.E0,0.E0));
#574=AXIS2_PLACEMENT_3D('',#571,#572,#573);
#575=PLANE('',#574);
#576=ORIENTED_EDGE('',*,*,#565,.F.);
#577=ORIENTED_EDGE('',*,*,#474,.F.);
#578=ORIENTED_EDGE('',*,*,#472,.F.);
#580=ORIENTED_EDGE('',*,*,#579,.F.);
#582=ORIENTED_EDGE('',*,*,#581,.F.);
#584=ORIENTED_EDGE('',*,*,#583,.F.);
#586=ORIENTED_EDGE('',*,*,#585,.T.);
#588=ORIENTED_EDGE('',*,*,#587,.T.);
#590=ORIENTED_EDGE('',*,*,#589,.T.);
#592=ORIENTED_EDGE('',*,*,#591,.F.);
#594=ORIENTED_EDGE('',*,*,#593,.F.);
#596=ORIENTED_EDGE('',*,*,#595,.F.);
#597=ORIENTED_EDGE('',*,*,#533,.F.);
#598=ORIENTED_EDGE('',*,*,#531,.F.);
#599=EDGE_LOOP('',(#576,#577,#578,#580,#582,#584,#586,#588,#590,#592,#594,#596,
#597,#598));
#600=FACE_OUTER_BOUND('',#599,.F.);
#601=ADVANCED_FACE('',(#600),#575,.T.);
#602=CARTESIAN_POINT('',(2.292625454363E2,1.620579697025E2,0.E0));
#603=DIRECTION('',(9.396926207869E-1,3.420201433229E-1,0.E0));
#604=DIRECTION('',(0.E0,0.E0,-1.E0));
#605=AXIS2_PLACEMENT_3D('',#602,#603,#604);
#606=PLANE('',#605);
#607=ORIENTED_EDGE('',*,*,#579,.T.);
#608=ORIENTED_EDGE('',*,*,#470,.T.);
#609=ORIENTED_EDGE('',*,*,#512,.T.);
#611=ORIENTED_EDGE('',*,*,#610,.T.);
#612=EDGE_LOOP('',(#607,#608,#609,#611));
#613=FACE_OUTER_BOUND('',#612,.F.);
#614=ADVANCED_FACE('',(#613),#606,.F.);
#615=CARTESIAN_POINT('',(2.347127626369E2,1.640416865338E2,0.E0));
#616=DIRECTION('',(0.E0,0.E0,-1.E0));
#617=DIRECTION('',(-9.848077530122E-1,-1.736481776669E-1,0.E0));
#618=AXIS2_PLACEMENT_3D('',#615,#616,#617);
#619=CYLINDRICAL_SURFACE('',#618,5.8E0);
#620=ORIENTED_EDGE('',*,*,#581,.T.);
#621=ORIENTED_EDGE('',*,*,#610,.F.);
#622=ORIENTED_EDGE('',*,*,#510,.T.);
#623=ORIENTED_EDGE('',*,*,#508,.T.);
#625=ORIENTED_EDGE('',*,*,#624,.F.);
#626=ORIENTED_EDGE('',*,*,#583,.T.);
#627=EDGE_LOOP('',(#620,#621,#622,#623,#625,#626));
#628=FACE_OUTER_BOUND('',#627,.F.);
#629=ADVANCED_FACE('',(#628),#619,.T.);
#630=CARTESIAN_POINT('',(2.289127626369E2,1.802311153712E2,0.E0));
#631=DIRECTION('',(1.E0,0.E0,0.E0));
#632=DIRECTION('',(0.E0,0.E0,-1.E0));
#633=AXIS2_PLACEMENT_3D('',#630,#631,#632);
#634=PLANE('',#633);
#635=ORIENTED_EDGE('',*,*,#585,.F.);
#636=ORIENTED_EDGE('',*,*,#624,.T.);
#637=ORIENTED_EDGE('',*,*,#506,.F.);
#639=ORIENTED_EDGE('',*,*,#638,.T.);
#640=EDGE_LOOP('',(#635,#636,#637,#639));
#641=FACE_OUTER_BOUND('',#640,.F.);
#643=ORIENTED_EDGE('',*,*,#642,.F.);
#645=ORIENTED_EDGE('',*,*,#644,.F.);
#646=EDGE_LOOP('',(#643,#645));
#647=FACE_BOUND('',#646,.F.);
#649=ORIENTED_EDGE('',*,*,#648,.F.);
#651=ORIENTED_EDGE('',*,*,#650,.F.);
#652=EDGE_LOOP('',(#649,#651));
#653=FACE_BOUND('',#652,.F.);
#655=ORIENTED_EDGE('',*,*,#654,.F.);
#657=ORIENTED_EDGE('',*,*,#656,.F.);
#658=EDGE_LOOP('',(#655,#657));
#659=FACE_BOUND('',#658,.F.);
#661=ORIENTED_EDGE('',*,*,#660,.F.);
#663=ORIENTED_EDGE('',*,*,#662,.F.);
#664=EDGE_LOOP('',(#661,#663));
#665=FACE_BOUND('',#664,.F.);
#666=ADVANCED_FACE('',(#641,#647,#653,#659,#665),#634,.F.);
#667=CARTESIAN_POINT('',(2.095959818400E2,1.752311153712E2,9.36E1));
#668=DIRECTION('',(-1.E0,0.E0,0.E0));
#669=DIRECTION('',(0.E0,-1.E0,0.E0));
#670=AXIS2_PLACEMENT_3D('',#667,#668,#669);
#671=CYLINDRICAL_SURFACE('',#670,2.75E0);
#673=ORIENTED_EDGE('',*,*,#672,.T.);
#675=ORIENTED_EDGE('',*,*,#674,.T.);
#676=ORIENTED_EDGE('',*,*,#660,.T.);
#678=ORIENTED_EDGE('',*,*,#677,.F.);
#679=EDGE_LOOP('',(#673,#675,#676,#678));
#680=FACE_OUTER_BOUND('',#679,.F.);
#681=ADVANCED_FACE('',(#680),#671,.F.);
#682=CARTESIAN_POINT('',(2.292127626369E2,1.640416865338E2,0.E0));
#683=DIRECTION('',(-1.E0,0.E0,0.E0));
#684=DIRECTION('',(0.E0,0.E0,1.E0));
#685=AXIS2_PLACEMENT_3D('',#682,#683,#684);
#686=PLANE('',#685);
#687=ORIENTED_EDGE('',*,*,#589,.F.);
#689=ORIENTED_EDGE('',*,*,#688,.F.);
#690=ORIENTED_EDGE('',*,*,#502,.F.);
#692=ORIENTED_EDGE('',*,*,#691,.T.);
#693=EDGE_LOOP('',(#687,#689,#690,#692));
#694=FACE_OUTER_BOUND('',#693,.F.);
#696=ORIENTED_EDGE('',*,*,#695,.F.);
#698=ORIENTED_EDGE('',*,*,#697,.F.);
#699=EDGE_LOOP('',(#696,#698));
#700=FACE_BOUND('',#699,.F.);
#702=ORIENTED_EDGE('',*,*,#701,.F.);
#704=ORIENTED_EDGE('',*,*,#703,.F.);
#705=EDGE_LOOP('',(#702,#704));
#706=FACE_BOUND('',#705,.F.);
#708=ORIENTED_EDGE('',*,*,#707,.F.);
#710=ORIENTED_EDGE('',*,*,#709,.F.);
#711=EDGE_LOOP('',(#708,#710));
#712=FACE_BOUND('',#711,.F.);
#714=ORIENTED_EDGE('',*,*,#713,.F.);
#715=ORIENTED_EDGE('',*,*,#672,.F.);
#716=EDGE_LOOP('',(#714,#715));
#717=FACE_BOUND('',#716,.F.);
#718=ADVANCED_FACE('',(#694,#700,#706,#712,#717),#686,.F.);
#719=CARTESIAN_POINT('',(2.095959818400E2,1.752311153712E2,9.36E1));
#720=DIRECTION('',(-1.E0,0.E0,0.E0));
#721=DIRECTION('',(0.E0,-1.E0,0.E0));
#722=AXIS2_PLACEMENT_3D('',#719,#720,#721);
#723=CYLINDRICAL_SURFACE('',#722,2.75E0);
#724=ORIENTED_EDGE('',*,*,#713,.T.);
#725=ORIENTED_EDGE('',*,*,#677,.T.);
#726=ORIENTED_EDGE('',*,*,#662,.T.);
#727=ORIENTED_EDGE('',*,*,#674,.F.);
#728=EDGE_LOOP('',(#724,#725,#726,#727));
#729=FACE_OUTER_BOUND('',#728,.F.);
#730=ADVANCED_FACE('',(#729),#723,.F.);
#731=CARTESIAN_POINT('',(2.095959818400E2,1.752311153712E2,7.02E1));
#732=DIRECTION('',(-1.E0,0.E0,0.E0));
#733=DIRECTION('',(0.E0,-1.E0,0.E0));
#734=AXIS2_PLACEMENT_3D('',#731,#732,#733);
#735=CYLINDRICAL_SURFACE('',#734,2.75E0);
#736=ORIENTED_EDGE('',*,*,#695,.T.);
#738=ORIENTED_EDGE('',*,*,#737,.T.);
#739=ORIENTED_EDGE('',*,*,#644,.T.);
#741=ORIENTED_EDGE('',*,*,#740,.F.);
#742=EDGE_LOOP('',(#736,#738,#739,#741));
#743=FACE_OUTER_BOUND('',#742,.F.);
#744=ADVANCED_FACE('',(#743),#735,.F.);
#745=CARTESIAN_POINT('',(2.095959818400E2,1.752311153712E2,7.02E1));
#746=DIRECTION('',(-1.E0,0.E0,0.E0));
#747=DIRECTION('',(0.E0,-1.E0,0.E0));
#748=AXIS2_PLACEMENT_3D('',#745,#746,#747);
#749=CYLINDRICAL_SURFACE('',#748,2.75E0);
#750=ORIENTED_EDGE('',*,*,#697,.T.);
#751=ORIENTED_EDGE('',*,*,#740,.T.);
#752=ORIENTED_EDGE('',*,*,#642,.T.);
#753=ORIENTED_EDGE('',*,*,#737,.F.);
#754=EDGE_LOOP('',(#750,#751,#752,#753));
#755=FACE_OUTER_BOUND('',#754,.F.);
#756=ADVANCED_FACE('',(#755),#749,.F.);
#757=CARTESIAN_POINT('',(2.095959818400E2,1.752311153712E2,4.68E1));
#758=DIRECTION('',(-1.E0,0.E0,0.E0));
#759=DIRECTION('',(0.E0,-1.E0,0.E0));
#760=AXIS2_PLACEMENT_3D('',#757,#758,#759);
#761=CYLINDRICAL_SURFACE('',#760,2.75E0);
#762=ORIENTED_EDGE('',*,*,#701,.T.);
#764=ORIENTED_EDGE('',*,*,#763,.T.);
#765=ORIENTED_EDGE('',*,*,#650,.T.);
#767=ORIENTED_EDGE('',*,*,#766,.F.);
#768=EDGE_LOOP('',(#762,#764,#765,#767));
#769=FACE_OUTER_BOUND('',#768,.F.);
#770=ADVANCED_FACE('',(#769),#761,.F.);
#771=CARTESIAN_POINT('',(2.095959818400E2,1.752311153712E2,4.68E1));
#772=DIRECTION('',(-1.E0,0.E0,0.E0));
#773=DIRECTION('',(0.E0,-1.E0,0.E0));
#774=AXIS2_PLACEMENT_3D('',#771,#772,#773);
#775=CYLINDRICAL_SURFACE('',#774,2.75E0);
#776=ORIENTED_EDGE('',*,*,#703,.T.);
#777=ORIENTED_EDGE('',*,*,#766,.T.);
#778=ORIENTED_EDGE('',*,*,#648,.T.);
#779=ORIENTED_EDGE('',*,*,#763,.F.);
#780=EDGE_LOOP('',(#776,#777,#778,#779));
#781=FACE_OUTER_BOUND('',#780,.F.);
#782=ADVANCED_FACE('',(#781),#775,.F.);
#783=CARTESIAN_POINT('',(2.095959818400E2,1.752311153712E2,2.34E1));
#784=DIRECTION('',(-1.E0,0.E0,0.E0));
#785=DIRECTION('',(0.E0,-1.E0,0.E0));
#786=AXIS2_PLACEMENT_3D('',#783,#784,#785);
#787=CYLINDRICAL_SURFACE('',#786,2.75E0);
#788=ORIENTED_EDGE('',*,*,#707,.T.);
#790=ORIENTED_EDGE('',*,*,#789,.T.);
#791=ORIENTED_EDGE('',*,*,#656,.T.);
#793=ORIENTED_EDGE('',*,*,#792,.F.);
#794=EDGE_LOOP('',(#788,#790,#791,#793));
#795=FACE_OUTER_BOUND('',#794,.F.);
#796=ADVANCED_FACE('',(#795),#787,.F.);
#797=CARTESIAN_POINT('',(2.095959818400E2,1.752311153712E2,2.34E1));
#798=DIRECTION('',(-1.E0,0.E0,0.E0));
#799=DIRECTION('',(0.E0,-1.E0,0.E0));
#800=AXIS2_PLACEMENT_3D('',#797,#798,#799);
#801=CYLINDRICAL_SURFACE('',#800,2.75E0);
#802=ORIENTED_EDGE('',*,*,#709,.T.);
#803=ORIENTED_EDGE('',*,*,#792,.T.);
#804=ORIENTED_EDGE('',*,*,#654,.T.);
#805=ORIENTED_EDGE('',*,*,#789,.F.);
#806=EDGE_LOOP('',(#802,#803,#804,#805));
#807=FACE_OUTER_BOUND('',#806,.F.);
#808=ADVANCED_FACE('',(#807),#801,.F.);
#809=CARTESIAN_POINT('',(2.292127626369E2,1.802311153712E2,0.E0));
#810=DIRECTION('',(0.E0,-1.E0,0.E0));
#811=DIRECTION('',(0.E0,0.E0,1.E0));
#812=AXIS2_PLACEMENT_3D('',#809,#810,#811);
#813=PLANE('',#812);
#814=ORIENTED_EDGE('',*,*,#587,.F.);
#815=ORIENTED_EDGE('',*,*,#638,.F.);
#816=ORIENTED_EDGE('',*,*,#504,.F.);
#817=ORIENTED_EDGE('',*,*,#688,.T.);
#818=EDGE_LOOP('',(#814,#815,#816,#817));
#819=FACE_OUTER_BOUND('',#818,.F.);
#820=ADVANCED_FACE('',(#819),#813,.F.);
#821=CARTESIAN_POINT('',(2.347127626369E2,1.640416865338E2,0.E0));
#822=DIRECTION('',(0.E0,0.E0,-1.E0));
#823=DIRECTION('',(-9.848077530122E-1,-1.736481776669E-1,0.E0));
#824=AXIS2_PLACEMENT_3D('',#821,#822,#823);
#825=CYLINDRICAL_SURFACE('',#824,5.5E0);
#826=ORIENTED_EDGE('',*,*,#591,.T.);
#827=ORIENTED_EDGE('',*,*,#691,.F.);
#828=ORIENTED_EDGE('',*,*,#500,.T.);
#829=ORIENTED_EDGE('',*,*,#498,.T.);
#831=ORIENTED_EDGE('',*,*,#830,.F.);
#832=ORIENTED_EDGE('',*,*,#593,.T.);
#833=EDGE_LOOP('',(#826,#827,#828,#829,#831,#832));
#834=FACE_OUTER_BOUND('',#833,.F.);
#835=ADVANCED_FACE('',(#834),#825,.F.);
#836=CARTESIAN_POINT('',(2.323398425343E2,1.544803067328E2,0.E0));
#837=DIRECTION('',(-9.396926207869E-1,-3.420201433229E-1,0.E0));
#838=DIRECTION('',(0.E0,0.E0,1.E0));
#839=AXIS2_PLACEMENT_3D('',#836,#837,#838);
#840=PLANE('',#839);
#841=ORIENTED_EDGE('',*,*,#595,.T.);
#842=ORIENTED_EDGE('',*,*,#830,.T.);
#843=ORIENTED_EDGE('',*,*,#496,.T.);
#844=ORIENTED_EDGE('',*,*,#535,.T.);
#845=EDGE_LOOP('',(#841,#842,#843,#844));
#846=FACE_OUTER_BOUND('',#845,.F.);
#847=ADVANCED_FACE('',(#846),#840,.F.);
#848=CLOSED_SHELL('',(#459,#485,#518,#542,#555,#570,#601,#614,#629,#666,#681,
#718,#730,#744,#756,#770,#782,#796,#808,#820,#835,#847));
#849=MANIFOLD_SOLID_BREP('',#848);
#851=DIMENSIONAL_EXPONENTS(0.E0,0.E0,0.E0,0.E0,0.E0,0.E0,0.E0);
#853=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(1.745329251994E-2),#852);
#854=(CONVERSION_BASED_UNIT('DEGREE',#853)NAMED_UNIT(*)PLANE_ANGLE_UNIT());
#856=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.231263734637E-2),#850,
'closure',
'Maximum model space distance between geometric entities at asserted connectivities');
#857=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((
#856))GLOBAL_UNIT_ASSIGNED_CONTEXT((#850,#854,#855))REPRESENTATION_CONTEXT
('ID1','3'));
#858=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#859=DIRECTION('',(0.E0,0.E0,1.E0));
#860=DIRECTION('',(1.E0,0.E0,0.E0));
#863=APPLICATION_CONTEXT(
'CONFIGURATION CONTROLLED 3D DESIGNS OF MECHANICAL PARTS AND ASSEMBLIES');
#864=APPLICATION_PROTOCOL_DEFINITION('international standard',
'config_control_design',1994,#863);
#865=DESIGN_CONTEXT('',#863,'design');
#866=MECHANICAL_CONTEXT('',#863,'mechanical');
#867=PRODUCT('LAD4-3DSOLID_5903','LAD4-3DSOLID_5903','NOT SPECIFIED',(#866));
#868=PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE('1','LAST_VERSION',#867,
.MADE.);
#877=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#878=DIRECTION('',(0.E0,0.E0,1.E0));
#879=DIRECTION('',(1.E0,0.E0,0.E0));
#880=AXIS2_PLACEMENT_3D('',#877,#878,#879);
#881=ITEM_DEFINED_TRANSFORMATION('','',#861,#880);
#882=(REPRESENTATION_RELATIONSHIP('','',#862,#874)REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#881)SHAPE_REPRESENTATION_RELATIONSHIP());
#883=CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#882,#876);
#884=CARTESIAN_POINT('',(2.292127626369E2,1.752311153712E2,9.36E1));
#885=DIRECTION('',(1.E0,0.E0,0.E0));
#886=DIRECTION('',(0.E0,-1.E0,0.E0));
#887=AXIS2_PLACEMENT_3D('',#884,#885,#886);
#889=CARTESIAN_POINT('',(2.292127626369E2,1.752311153712E2,9.36E1));
#890=DIRECTION('',(1.E0,0.E0,0.E0));
#891=DIRECTION('',(0.E0,1.E0,0.E0));
#892=AXIS2_PLACEMENT_3D('',#889,#890,#891);
#894=CARTESIAN_POINT('',(2.292127626369E2,1.752311153712E2,7.02E1));
#895=DIRECTION('',(1.E0,0.E0,0.E0));
#896=DIRECTION('',(0.E0,-1.E0,0.E0));
#897=AXIS2_PLACEMENT_3D('',#894,#895,#896);
#899=CARTESIAN_POINT('',(2.292127626369E2,1.752311153712E2,7.02E1));
#900=DIRECTION('',(1.E0,0.E0,0.E0));
#901=DIRECTION('',(0.E0,1.E0,0.E0));
#902=AXIS2_PLACEMENT_3D('',#899,#900,#901);
#904=CARTESIAN_POINT('',(2.292127626369E2,1.752311153712E2,4.68E1));
#905=DIRECTION('',(1.E0,0.E0,0.E0));
#906=DIRECTION('',(0.E0,-1.E0,0.E0));
#907=AXIS2_PLACEMENT_3D('',#904,#905,#906);
#909=CARTESIAN_POINT('',(2.292127626369E2,1.752311153712E2,4.68E1));
#910=DIRECTION('',(1.E0,0.E0,0.E0));
#911=DIRECTION('',(0.E0,1.E0,0.E0));
#912=AXIS2_PLACEMENT_3D('',#909,#910,#911);
#914=CARTESIAN_POINT('',(2.292127626369E2,1.752311153712E2,2.34E1));
#915=DIRECTION('',(1.E0,0.E0,0.E0));
#916=DIRECTION('',(0.E0,-1.E0,0.E0));
#917=AXIS2_PLACEMENT_3D('',#914,#915,#916);
#919=CARTESIAN_POINT('',(2.292127626369E2,1.752311153712E2,2.34E1));
#920=DIRECTION('',(1.E0,0.E0,0.E0));
#921=DIRECTION('',(0.E0,1.E0,0.E0));
#922=AXIS2_PLACEMENT_3D('',#919,#920,#921);
#924=DIRECTION('',(0.E0,1.E0,0.E0));
#925=VECTOR('',#924,1.E1);
#926=CARTESIAN_POINT('',(2.292127626369E2,1.702311153712E2,1.17E2));
#927=LINE('',#926,#925);
#928=DIRECTION('',(0.E0,0.E0,1.E0));
#929=VECTOR('',#928,1.17E2);
#930=CARTESIAN_POINT('',(2.292127626369E2,1.702311153712E2,0.E0));
#931=LINE('',#930,#929);
#932=DIRECTION('',(0.E0,-1.E0,0.E0));
#933=VECTOR('',#932,1.E1);
#934=CARTESIAN_POINT('',(2.292127626369E2,1.802311153712E2,0.E0));
#935=LINE('',#934,#933);
#936=DIRECTION('',(0.E0,0.E0,-1.E0));
#937=VECTOR('',#936,1.17E2);
#938=CARTESIAN_POINT('',(2.292127626369E2,1.802311153712E2,1.17E2));
#939=LINE('',#938,#937);
#940=DIRECTION('',(-1.E0,0.E0,0.E0));
#941=VECTOR('',#940,1.E1);
#942=CARTESIAN_POINT('',(2.392127626369E2,1.772311153712E2,9.36E1));
#943=LINE('',#942,#941);
#944=DIRECTION('',(-1.E0,0.E0,0.E0));
#945=VECTOR('',#944,1.E1);
#946=CARTESIAN_POINT('',(2.392127626369E2,1.732311153712E2,9.36E1));
#947=LINE('',#946,#945);
#948=CARTESIAN_POINT('',(2.392127626369E2,1.752311153712E2,9.36E1));
#949=DIRECTION('',(-1.E0,0.E0,0.E0));
#950=DIRECTION('',(0.E0,-1.E0,0.E0));
#951=AXIS2_PLACEMENT_3D('',#948,#949,#950);
#953=CARTESIAN_POINT('',(2.392127626369E2,1.752311153712E2,9.36E1));
#954=DIRECTION('',(-1.E0,0.E0,0.E0));
#955=DIRECTION('',(0.E0,1.E0,0.E0));
#956=AXIS2_PLACEMENT_3D('',#953,#954,#955);
#958=DIRECTION('',(-1.E0,0.E0,0.E0));
#959=VECTOR('',#958,1.E1);
#960=CARTESIAN_POINT('',(2.392127626369E2,1.772311153712E2,7.02E1));
#961=LINE('',#960,#959);
#962=DIRECTION('',(-1.E0,0.E0,0.E0));
#963=VECTOR('',#962,1.E1);
#964=CARTESIAN_POINT('',(2.392127626369E2,1.732311153712E2,7.02E1));
#965=LINE('',#964,#963);
#966=CARTESIAN_POINT('',(2.392127626369E2,1.752311153712E2,7.02E1));
#967=DIRECTION('',(-1.E0,0.E0,0.E0));
#968=DIRECTION('',(0.E0,-1.E0,0.E0));
#969=AXIS2_PLACEMENT_3D('',#966,#967,#968);
#971=CARTESIAN_POINT('',(2.392127626369E2,1.752311153712E2,7.02E1));
#972=DIRECTION('',(-1.E0,0.E0,0.E0));
#973=DIRECTION('',(0.E0,1.E0,0.E0));
#974=AXIS2_PLACEMENT_3D('',#971,#972,#973);
#976=DIRECTION('',(-1.E0,0.E0,0.E0));
#977=VECTOR('',#976,1.E1);
#978=CARTESIAN_POINT('',(2.392127626369E2,1.772311153712E2,4.68E1));
#979=LINE('',#978,#977);
#980=DIRECTION('',(-1.E0,0.E0,0.E0));
#981=VECTOR('',#980,1.E1);
#982=CARTESIAN_POINT('',(2.392127626369E2,1.732311153712E2,4.68E1));
#983=LINE('',#982,#981);
#984=CARTESIAN_POINT('',(2.392127626369E2,1.752311153712E2,4.68E1));
#985=DIRECTION('',(-1.E0,0.E0,0.E0));
#986=DIRECTION('',(0.E0,-1.E0,0.E0));
#987=AXIS2_PLACEMENT_3D('',#984,#985,#986);
#989=CARTESIAN_POINT('',(2.392127626369E2,1.752311153712E2,4.68E1));
#990=DIRECTION('',(-1.E0,0.E0,0.E0));
#991=DIRECTION('',(0.E0,1.E0,0.E0));
#992=AXIS2_PLACEMENT_3D('',#989,#990,#991);
#994=DIRECTION('',(-1.E0,0.E0,0.E0));
#995=VECTOR('',#994,1.E1);
#996=CARTESIAN_POINT('',(2.392127626369E2,1.772311153712E2,2.34E1));
#997=LINE('',#996,#995);
#998=DIRECTION('',(-1.E0,0.E0,0.E0));
#999=VECTOR('',#998,1.E1);
#1000=CARTESIAN_POINT('',(2.392127626369E2,1.732311153712E2,2.34E1));
#1001=LINE('',#1000,#999);
#1002=CARTESIAN_POINT('',(2.392127626369E2,1.752311153712E2,2.34E1));
#1003=DIRECTION('',(-1.E0,0.E0,0.E0));
#1004=DIRECTION('',(0.E0,-1.E0,0.E0));
#1005=AXIS2_PLACEMENT_3D('',#1002,#1003,#1004);
#1007=CARTESIAN_POINT('',(2.392127626369E2,1.752311153712E2,2.34E1));
#1008=DIRECTION('',(-1.E0,0.E0,0.E0));
#1009=DIRECTION('',(0.E0,1.E0,0.E0));
#1010=AXIS2_PLACEMENT_3D('',#1007,#1008,#1009);
#1012=DIRECTION('',(1.E0,0.E0,0.E0));
#1013=VECTOR('',#1012,3.45E1);
#1014=CARTESIAN_POINT('',(2.292127626369E2,1.802311153712E2,1.17E2));
#1015=LINE('',#1014,#1013);
#1016=DIRECTION('',(-1.E0,0.E0,0.E0));
#1017=VECTOR('',#1016,3.45E1);
#1018=CARTESIAN_POINT('',(2.637127626369E2,1.802311153712E2,0.E0));
#1019=LINE('',#1018,#1017);
#1020=DIRECTION('',(0.E0,0.E0,-1.E0));
#1021=VECTOR('',#1020,1.17E2);
#1022=CARTESIAN_POINT('',(2.637127626369E2,1.802311153712E2,1.17E2));
#1023=LINE('',#1022,#1021);
#1024=DIRECTION('',(-1.E0,0.E0,0.E0));
#1025=VECTOR('',#1024,2.85E1);
#1026=CARTESIAN_POINT('',(2.577127626369E2,1.702311153712E2,1.17E2));
#1027=LINE('',#1026,#1025);
#1028=DIRECTION('',(1.E0,0.E0,0.E0));
#1029=VECTOR('',#1028,2.85E1);
#1030=CARTESIAN_POINT('',(2.292127626369E2,1.702311153712E2,0.E0));
#1031=LINE('',#1030,#1029);
#1032=DIRECTION('',(0.E0,1.E0,0.E0));
#1033=VECTOR('',#1032,1.9E1);
#1034=CARTESIAN_POINT('',(2.577127626369E2,1.512311153712E2,1.17E2));
#1035=LINE('',#1034,#1033);
#1036=DIRECTION('',(0.E0,-1.E0,0.E0));
#1037=VECTOR('',#1036,1.9E1);
#1038=CARTESIAN_POINT('',(2.577127626369E2,1.702311153712E2,0.E0));
#1039=LINE('',#1038,#1037);
#1040=DIRECTION('',(0.E0,0.E0,-1.E0));
#1041=VECTOR('',#1040,1.17E2);
#1042=CARTESIAN_POINT('',(2.577127626369E2,1.702311153712E2,1.17E2));
#1043=LINE('',#1042,#1041);
#1044=DIRECTION('',(-1.E0,0.E0,0.E0));
#1045=VECTOR('',#1044,6.E0);
#1046=CARTESIAN_POINT('',(2.637127626369E2,1.512311153712E2,1.17E2));
#1047=LINE('',#1046,#1045);
#1048=DIRECTION('',(1.E0,0.E0,0.E0));
#1049=VECTOR('',#1048,6.E0);
#1050=CARTESIAN_POINT('',(2.577127626369E2,1.512311153712E2,0.E0));
#1051=LINE('',#1050,#1049);
#1052=DIRECTION('',(0.E0,0.E0,-1.E0));
#1053=VECTOR('',#1052,1.17E2);
#1054=CARTESIAN_POINT('',(2.577127626369E2,1.512311153712E2,1.17E2));
#1055=LINE('',#1054,#1053);
#1056=DIRECTION('',(0.E0,-1.E0,0.E0));
#1057=VECTOR('',#1056,2.9E1);
#1058=CARTESIAN_POINT('',(2.637127626369E2,1.802311153712E2,1.17E2));
#1059=LINE('',#1058,#1057);
#1060=DIRECTION('',(0.E0,1.E0,0.E0));
#1061=VECTOR('',#1060,2.9E1);
#1062=CARTESIAN_POINT('',(2.637127626369E2,1.512311153712E2,0.E0));
#1063=LINE('',#1062,#1061);
#1064=DIRECTION('',(0.E0,0.E0,-1.E0));
#1065=VECTOR('',#1064,1.17E2);
#1066=CARTESIAN_POINT('',(2.637127626369E2,1.512311153712E2,1.17E2));
#1067=LINE('',#1066,#1065);
#1068=CARTESIAN_POINT('',(2.292127626369E2,1.802311153712E2,1.17E2));
#1069=CARTESIAN_POINT('',(2.637127626369E2,1.802311153712E2,1.17E2));
#1070=VERTEX_POINT('',#1068);
#1071=VERTEX_POINT('',#1069);
#1072=CARTESIAN_POINT('',(2.292127626369E2,1.702311153712E2,1.17E2));
#1073=VERTEX_POINT('',#1072);
#1074=CARTESIAN_POINT('',(2.637127626369E2,1.512311153712E2,1.17E2));
#1075=VERTEX_POINT('',#1074);
#1076=CARTESIAN_POINT('',(2.637127626369E2,1.802311153712E2,0.E0));
#1077=VERTEX_POINT('',#1076);
#1078=CARTESIAN_POINT('',(2.292127626369E2,1.802311153712E2,0.E0));
#1079=VERTEX_POINT('',#1078);
#1080=CARTESIAN_POINT('',(2.292127626369E2,1.702311153712E2,0.E0));
#1081=VERTEX_POINT('',#1080);
#1082=CARTESIAN_POINT('',(2.577127626369E2,1.512311153712E2,1.17E2));
#1083=VERTEX_POINT('',#1082);
#1084=CARTESIAN_POINT('',(2.637127626369E2,1.512311153712E2,0.E0));
#1085=VERTEX_POINT('',#1084);
#1086=CARTESIAN_POINT('',(2.577127626369E2,1.702311153712E2,1.17E2));
#1087=VERTEX_POINT('',#1086);
#1088=CARTESIAN_POINT('',(2.577127626369E2,1.512311153712E2,0.E0));
#1089=VERTEX_POINT('',#1088);
#1090=CARTESIAN_POINT('',(2.577127626369E2,1.702311153712E2,0.E0));
#1091=VERTEX_POINT('',#1090);
#1092=CARTESIAN_POINT('',(2.392127626369E2,1.732311153712E2,9.36E1));
#1093=CARTESIAN_POINT('',(2.292127626369E2,1.732311153712E2,9.36E1));
#1094=VERTEX_POINT('',#1092);
#1095=VERTEX_POINT('',#1093);
#1096=CARTESIAN_POINT('',(2.392127626369E2,1.772311153712E2,9.36E1));
#1097=CARTESIAN_POINT('',(2.292127626369E2,1.772311153712E2,9.36E1));
#1098=VERTEX_POINT('',#1096);
#1099=VERTEX_POINT('',#1097);
#1100=CARTESIAN_POINT('',(2.392127626369E2,1.732311153712E2,7.02E1));
#1101=CARTESIAN_POINT('',(2.292127626369E2,1.732311153712E2,7.02E1));
#1102=VERTEX_POINT('',#1100);
#1103=VERTEX_POINT('',#1101);
#1104=CARTESIAN_POINT('',(2.392127626369E2,1.772311153712E2,7.02E1));
#1105=CARTESIAN_POINT('',(2.292127626369E2,1.772311153712E2,7.02E1));
#1106=VERTEX_POINT('',#1104);
#1107=VERTEX_POINT('',#1105);
#1108=CARTESIAN_POINT('',(2.392127626369E2,1.732311153712E2,4.68E1));
#1109=CARTESIAN_POINT('',(2.292127626369E2,1.732311153712E2,4.68E1));
#1110=VERTEX_POINT('',#1108);
#1111=VERTEX_POINT('',#1109);
#1112=CARTESIAN_POINT('',(2.392127626369E2,1.772311153712E2,4.68E1));
#1113=CARTESIAN_POINT('',(2.292127626369E2,1.772311153712E2,4.68E1));
#1114=VERTEX_POINT('',#1112);
#1115=VERTEX_POINT('',#1113);
#1116=CARTESIAN_POINT('',(2.392127626369E2,1.732311153712E2,2.34E1));
#1117=CARTESIAN_POINT('',(2.292127626369E2,1.732311153712E2,2.34E1));
#1118=VERTEX_POINT('',#1116);
#1119=VERTEX_POINT('',#1117);
#1120=CARTESIAN_POINT('',(2.392127626369E2,1.772311153712E2,2.34E1));
#1121=CARTESIAN_POINT('',(2.292127626369E2,1.772311153712E2,2.34E1));
#1122=VERTEX_POINT('',#1120);
#1123=VERTEX_POINT('',#1121);
#1124=CARTESIAN_POINT('',(2.392127626369E2,1.752311153712E2,9.36E1));
#1125=DIRECTION('',(-1.E0,0.E0,0.E0));
#1126=DIRECTION('',(0.E0,-1.E0,0.E0));
#1127=AXIS2_PLACEMENT_3D('',#1124,#1125,#1126);
#1128=CYLINDRICAL_SURFACE('',#1127,2.E0);
#1130=ORIENTED_EDGE('',*,*,#1129,.T.);
#1132=ORIENTED_EDGE('',*,*,#1131,.F.);
#1134=ORIENTED_EDGE('',*,*,#1133,.T.);
#1136=ORIENTED_EDGE('',*,*,#1135,.T.);
#1137=EDGE_LOOP('',(#1130,#1132,#1134,#1136));
#1138=FACE_OUTER_BOUND('',#1137,.F.);
#1139=ADVANCED_FACE('',(#1138),#1128,.F.);
#1140=CARTESIAN_POINT('',(2.292127626369E2,1.702311153712E2,0.E0));
#1141=DIRECTION('',(-1.E0,0.E0,0.E0));
#1142=DIRECTION('',(0.E0,0.E0,1.E0));
#1143=AXIS2_PLACEMENT_3D('',#1140,#1141,#1142);
#1144=PLANE('',#1143);
#1146=ORIENTED_EDGE('',*,*,#1145,.F.);
#1148=ORIENTED_EDGE('',*,*,#1147,.F.);
#1150=ORIENTED_EDGE('',*,*,#1149,.F.);
#1152=ORIENTED_EDGE('',*,*,#1151,.F.);
#1153=EDGE_LOOP('',(#1146,#1148,#1150,#1152));
#1154=FACE_OUTER_BOUND('',#1153,.F.);
#1156=ORIENTED_EDGE('',*,*,#1155,.F.);
#1158=ORIENTED_EDGE('',*,*,#1157,.F.);
#1159=EDGE_LOOP('',(#1156,#1158));
#1160=FACE_BOUND('',#1159,.F.);
#1162=ORIENTED_EDGE('',*,*,#1161,.F.);
#1164=ORIENTED_EDGE('',*,*,#1163,.F.);
#1165=EDGE_LOOP('',(#1162,#1164));
#1166=FACE_BOUND('',#1165,.F.);
#1168=ORIENTED_EDGE('',*,*,#1167,.F.);
#1170=ORIENTED_EDGE('',*,*,#1169,.F.);
#1171=EDGE_LOOP('',(#1168,#1170));
#1172=FACE_BOUND('',#1171,.F.);
#1174=ORIENTED_EDGE('',*,*,#1173,.F.);
#1175=ORIENTED_EDGE('',*,*,#1129,.F.);
#1176=EDGE_LOOP('',(#1174,#1175));
#1177=FACE_BOUND('',#1176,.F.);
#1178=ADVANCED_FACE('',(#1154,#1160,#1166,#1172,#1177),#1144,.T.);
#1179=CARTESIAN_POINT('',(2.392127626369E2,1.752311153712E2,9.36E1));
#1180=DIRECTION('',(-1.E0,0.E0,0.E0));
#1181=DIRECTION('',(0.E0,-1.E0,0.E0));
#1182=AXIS2_PLACEMENT_3D('',#1179,#1180,#1181);
#1183=CYLINDRICAL_SURFACE('',#1182,2.E0);
#1184=ORIENTED_EDGE('',*,*,#1173,.T.);
#1185=ORIENTED_EDGE('',*,*,#1135,.F.);
#1187=ORIENTED_EDGE('',*,*,#1186,.T.);
#1188=ORIENTED_EDGE('',*,*,#1131,.T.);
#1189=EDGE_LOOP('',(#1184,#1185,#1187,#1188));
#1190=FACE_OUTER_BOUND('',#1189,.F.);
#1191=ADVANCED_FACE('',(#1190),#1183,.F.);
#1192=CARTESIAN_POINT('',(2.392127626369E2,1.752311153712E2,9.36E1));
#1193=DIRECTION('',(-1.E0,0.E0,0.E0));
#1194=DIRECTION('',(0.E0,0.E0,1.E0));
#1195=AXIS2_PLACEMENT_3D('',#1192,#1193,#1194);
#1196=PLANE('',#1195);
#1197=ORIENTED_EDGE('',*,*,#1133,.F.);
#1198=ORIENTED_EDGE('',*,*,#1186,.F.);
#1199=EDGE_LOOP('',(#1197,#1198));
#1200=FACE_OUTER_BOUND('',#1199,.F.);
#1201=ADVANCED_FACE('',(#1200),#1196,.T.);
#1202=CARTESIAN_POINT('',(2.392127626369E2,1.752311153712E2,7.02E1));
#1203=DIRECTION('',(-1.E0,0.E0,0.E0));
#1204=DIRECTION('',(0.E0,-1.E0,0.E0));
#1205=AXIS2_PLACEMENT_3D('',#1202,#1203,#1204);
#1206=CYLINDRICAL_SURFACE('',#1205,2.E0);
#1207=ORIENTED_EDGE('',*,*,#1155,.T.);
#1209=ORIENTED_EDGE('',*,*,#1208,.F.);
#1211=ORIENTED_EDGE('',*,*,#1210,.T.);
#1213=ORIENTED_EDGE('',*,*,#1212,.T.);
#1214=EDGE_LOOP('',(#1207,#1209,#1211,#1213));
#1215=FACE_OUTER_BOUND('',#1214,.F.);
#1216=ADVANCED_FACE('',(#1215),#1206,.F.);
#1217=CARTESIAN_POINT('',(2.392127626369E2,1.752311153712E2,7.02E1));
#1218=DIRECTION('',(-1.E0,0.E0,0.E0));
#1219=DIRECTION('',(0.E0,-1.E0,0.E0));
#1220=AXIS2_PLACEMENT_3D('',#1217,#1218,#1219);
#1221=CYLINDRICAL_SURFACE('',#1220,2.E0);
#1222=ORIENTED_EDGE('',*,*,#1157,.T.);
#1223=ORIENTED_EDGE('',*,*,#1212,.F.);
#1225=ORIENTED_EDGE('',*,*,#1224,.T.);
#1226=ORIENTED_EDGE('',*,*,#1208,.T.);
#1227=EDGE_LOOP('',(#1222,#1223,#1225,#1226));
#1228=FACE_OUTER_BOUND('',#1227,.F.);
#1229=ADVANCED_FACE('',(#1228),#1221,.F.);
#1230=CARTESIAN_POINT('',(2.392127626369E2,1.752311153712E2,7.02E1));
#1231=DIRECTION('',(-1.E0,0.E0,0.E0));
#1232=DIRECTION('',(0.E0,0.E0,1.E0));
#1233=AXIS2_PLACEMENT_3D('',#1230,#1231,#1232);
#1234=PLANE('',#1233);
#1235=ORIENTED_EDGE('',*,*,#1224,.F.);
#1236=ORIENTED_EDGE('',*,*,#1210,.F.);
#1237=EDGE_LOOP('',(#1235,#1236));
#1238=FACE_OUTER_BOUND('',#1237,.F.);
#1239=ADVANCED_FACE('',(#1238),#1234,.T.);
#1240=CARTESIAN_POINT('',(2.392127626369E2,1.752311153712E2,4.68E1));
#1241=DIRECTION('',(-1.E0,0.E0,0.E0));
#1242=DIRECTION('',(0.E0,-1.E0,0.E0));
#1243=AXIS2_PLACEMENT_3D('',#1240,#1241,#1242);
#1244=CYLINDRICAL_SURFACE('',#1243,2.E0);
#1245=ORIENTED_EDGE('',*,*,#1161,.T.);
#1247=ORIENTED_EDGE('',*,*,#1246,.F.);
#1249=ORIENTED_EDGE('',*,*,#1248,.T.);
#1251=ORIENTED_EDGE('',*,*,#1250,.T.);
#1252=EDGE_LOOP('',(#1245,#1247,#1249,#1251));
#1253=FACE_OUTER_BOUND('',#1252,.F.);
#1254=ADVANCED_FACE('',(#1253),#1244,.F.);
#1255=CARTESIAN_POINT('',(2.392127626369E2,1.752311153712E2,4.68E1));
#1256=DIRECTION('',(-1.E0,0.E0,0.E0));
#1257=DIRECTION('',(0.E0,-1.E0,0.E0));
#1258=AXIS2_PLACEMENT_3D('',#1255,#1256,#1257);
#1259=CYLINDRICAL_SURFACE('',#1258,2.E0);
#1260=ORIENTED_EDGE('',*,*,#1163,.T.);
#1261=ORIENTED_EDGE('',*,*,#1250,.F.);
#1263=ORIENTED_EDGE('',*,*,#1262,.T.);
#1264=ORIENTED_EDGE('',*,*,#1246,.T.);
#1265=EDGE_LOOP('',(#1260,#1261,#1263,#1264));
#1266=FACE_OUTER_BOUND('',#1265,.F.);
#1267=ADVANCED_FACE('',(#1266),#1259,.F.);
#1268=CARTESIAN_POINT('',(2.392127626369E2,1.752311153712E2,4.68E1));
#1269=DIRECTION('',(-1.E0,0.E0,0.E0));
#1270=DIRECTION('',(0.E0,0.E0,1.E0));
#1271=AXIS2_PLACEMENT_3D('',#1268,#1269,#1270);
#1272=PLANE('',#1271);
#1273=ORIENTED_EDGE('',*,*,#1262,.F.);
#1274=ORIENTED_EDGE('',*,*,#1248,.F.);
#1275=EDGE_LOOP('',(#1273,#1274));
#1276=FACE_OUTER_BOUND('',#1275,.F.);
#1277=ADVANCED_FACE('',(#1276),#1272,.T.);
#1278=CARTESIAN_POINT('',(2.392127626369E2,1.752311153712E2,2.34E1));
#1279=DIRECTION('',(-1.E0,0.E0,0.E0));
#1280=DIRECTION('',(0.E0,-1.E0,0.E0));
#1281=AXIS2_PLACEMENT_3D('',#1278,#1279,#1280);
#1282=CYLINDRICAL_SURFACE('',#1281,2.E0);
#1283=ORIENTED_EDGE('',*,*,#1167,.T.);
#1285=ORIENTED_EDGE('',*,*,#1284,.F.);
#1287=ORIENTED_EDGE('',*,*,#1286,.T.);
#1289=ORIENTED_EDGE('',*,*,#1288,.T.);
#1290=EDGE_LOOP('',(#1283,#1285,#1287,#1289));
#1291=FACE_OUTER_BOUND('',#1290,.F.);
#1292=ADVANCED_FACE('',(#1291),#1282,.F.);
#1293=CARTESIAN_POINT('',(2.392127626369E2,1.752311153712E2,2.34E1));
#1294=DIRECTION('',(-1.E0,0.E0,0.E0));
#1295=DIRECTION('',(0.E0,-1.E0,0.E0));
#1296=AXIS2_PLACEMENT_3D('',#1293,#1294,#1295);
#1297=CYLINDRICAL_SURFACE('',#1296,2.E0);
#1298=ORIENTED_EDGE('',*,*,#1169,.T.);
#1299=ORIENTED_EDGE('',*,*,#1288,.F.);
#1301=ORIENTED_EDGE('',*,*,#1300,.T.);
#1302=ORIENTED_EDGE('',*,*,#1284,.T.);
#1303=EDGE_LOOP('',(#1298,#1299,#1301,#1302));
#1304=FACE_OUTER_BOUND('',#1303,.F.);
#1305=ADVANCED_FACE('',(#1304),#1297,.F.);
#1306=CARTESIAN_POINT('',(2.392127626369E2,1.752311153712E2,2.34E1));
#1307=DIRECTION('',(-1.E0,0.E0,0.E0));
#1308=DIRECTION('',(0.E0,0.E0,1.E0));
#1309=AXIS2_PLACEMENT_3D('',#1306,#1307,#1308);
#1310=PLANE('',#1309);
#1311=ORIENTED_EDGE('',*,*,#1300,.F.);
#1312=ORIENTED_EDGE('',*,*,#1286,.F.);
#1313=EDGE_LOOP('',(#1311,#1312));
#1314=FACE_OUTER_BOUND('',#1313,.F.);
#1315=ADVANCED_FACE('',(#1314),#1310,.T.);
#1316=CARTESIAN_POINT('',(2.292127626369E2,1.702311153712E2,1.17E2));
#1317=DIRECTION('',(0.E0,0.E0,1.E0));
#1318=DIRECTION('',(1.E0,0.E0,0.E0));
#1319=AXIS2_PLACEMENT_3D('',#1316,#1317,#1318);
#1320=PLANE('',#1319);
#1321=ORIENTED_EDGE('',*,*,#1145,.T.);
#1323=ORIENTED_EDGE('',*,*,#1322,.T.);
#1325=ORIENTED_EDGE('',*,*,#1324,.T.);
#1327=ORIENTED_EDGE('',*,*,#1326,.T.);
#1329=ORIENTED_EDGE('',*,*,#1328,.T.);
#1331=ORIENTED_EDGE('',*,*,#1330,.T.);
#1332=EDGE_LOOP('',(#1321,#1323,#1325,#1327,#1329,#1331));
#1333=FACE_OUTER_BOUND('',#1332,.F.);
#1334=ADVANCED_FACE('',(#1333),#1320,.T.);
#1335=CARTESIAN_POINT('',(2.292127626369E2,1.802311153712E2,0.E0));
#1336=DIRECTION('',(0.E0,1.E0,0.E0));
#1337=DIRECTION('',(0.E0,0.E0,1.E0));
#1338=AXIS2_PLACEMENT_3D('',#1335,#1336,#1337);
#1339=PLANE('',#1338);
#1340=ORIENTED_EDGE('',*,*,#1322,.F.);
#1341=ORIENTED_EDGE('',*,*,#1151,.T.);
#1343=ORIENTED_EDGE('',*,*,#1342,.F.);
#1345=ORIENTED_EDGE('',*,*,#1344,.F.);
#1346=EDGE_LOOP('',(#1340,#1341,#1343,#1345));
#1347=FACE_OUTER_BOUND('',#1346,.F.);
#1348=ADVANCED_FACE('',(#1347),#1339,.T.);
#1349=CARTESIAN_POINT('',(2.502127626369E2,1.672311153712E2,0.E0));
#1350=DIRECTION('',(0.E0,0.E0,1.E0));
#1351=DIRECTION('',(1.E0,0.E0,0.E0));
#1352=AXIS2_PLACEMENT_3D('',#1349,#1350,#1351);
#1353=PLANE('',#1352);
#1355=ORIENTED_EDGE('',*,*,#1354,.T.);
#1357=ORIENTED_EDGE('',*,*,#1356,.T.);
#1359=ORIENTED_EDGE('',*,*,#1358,.T.);
#1361=ORIENTED_EDGE('',*,*,#1360,.T.);
#1362=ORIENTED_EDGE('',*,*,#1342,.T.);
#1363=ORIENTED_EDGE('',*,*,#1149,.T.);
#1364=EDGE_LOOP('',(#1355,#1357,#1359,#1361,#1362,#1363));
#1365=FACE_OUTER_BOUND('',#1364,.F.);
#1366=ADVANCED_FACE('',(#1365),#1353,.F.);
#1367=CARTESIAN_POINT('',(2.577127626369E2,1.702311153712E2,0.E0));
#1368=DIRECTION('',(0.E0,-1.E0,0.E0));
#1369=DIRECTION('',(0.E0,0.E0,-1.E0));
#1370=AXIS2_PLACEMENT_3D('',#1367,#1368,#1369);
#1371=PLANE('',#1370);
#1372=ORIENTED_EDGE('',*,*,#1330,.F.);
#1374=ORIENTED_EDGE('',*,*,#1373,.T.);
#1375=ORIENTED_EDGE('',*,*,#1354,.F.);
#1376=ORIENTED_EDGE('',*,*,#1147,.T.);
#1377=EDGE_LOOP('',(#1372,#1374,#1375,#1376));
#1378=FACE_OUTER_BOUND('',#1377,.F.);
#1379=ADVANCED_FACE('',(#1378),#1371,.T.);
#1380=CARTESIAN_POINT('',(2.577127626369E2,1.512311153712E2,0.E0));
#1381=DIRECTION('',(-1.E0,0.E0,0.E0));
#1382=DIRECTION('',(0.E0,0.E0,1.E0));
#1383=AXIS2_PLACEMENT_3D('',#1380,#1381,#1382);
#1384=PLANE('',#1383);
#1385=ORIENTED_EDGE('',*,*,#1328,.F.);
#1387=ORIENTED_EDGE('',*,*,#1386,.T.);
#1388=ORIENTED_EDGE('',*,*,#1356,.F.);
#1389=ORIENTED_EDGE('',*,*,#1373,.F.);
#1390=EDGE_LOOP('',(#1385,#1387,#1388,#1389));
#1391=FACE_OUTER_BOUND('',#1390,.F.);
#1392=ADVANCED_FACE('',(#1391),#1384,.T.);
#1393=CARTESIAN_POINT('',(2.637127626369E2,1.512311153712E2,0.E0));
#1394=DIRECTION('',(0.E0,-1.E0,0.E0));
#1395=DIRECTION('',(0.E0,0.E0,-1.E0));
#1396=AXIS2_PLACEMENT_3D('',#1393,#1394,#1395);
#1397=PLANE('',#1396);
#1398=ORIENTED_EDGE('',*,*,#1326,.F.);
#1400=ORIENTED_EDGE('',*,*,#1399,.T.);
#1401=ORIENTED_EDGE('',*,*,#1358,.F.);
#1402=ORIENTED_EDGE('',*,*,#1386,.F.);
#1403=EDGE_LOOP('',(#1398,#1400,#1401,#1402));
#1404=FACE_OUTER_BOUND('',#1403,.F.);
#1405=ADVANCED_FACE('',(#1404),#1397,.T.);
#1406=CARTESIAN_POINT('',(2.637127626369E2,1.802311153712E2,0.E0));
#1407=DIRECTION('',(1.E0,0.E0,0.E0));
#1408=DIRECTION('',(0.E0,0.E0,-1.E0));
#1409=AXIS2_PLACEMENT_3D('',#1406,#1407,#1408);
#1410=PLANE('',#1409);
#1411=ORIENTED_EDGE('',*,*,#1324,.F.);
#1412=ORIENTED_EDGE('',*,*,#1344,.T.);
#1413=ORIENTED_EDGE('',*,*,#1360,.F.);
#1414=ORIENTED_EDGE('',*,*,#1399,.F.);
#1415=EDGE_LOOP('',(#1411,#1412,#1413,#1414));
#1416=FACE_OUTER_BOUND('',#1415,.F.);
#1417=ADVANCED_FACE('',(#1416),#1410,.T.);
#1418=CLOSED_SHELL('',(#1139,#1178,#1191,#1201,#1216,#1229,#1239,#1254,#1267,
#1277,#1292,#1305,#1315,#1334,#1348,#1366,#1379,#1392,#1405,#1417));
#1419=MANIFOLD_SOLID_BREP('',#1418);
#1421=DIMENSIONAL_EXPONENTS(0.E0,0.E0,0.E0,0.E0,0.E0,0.E0,0.E0);
#1423=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(1.745329251994E-2),
#1422);
#1424=(CONVERSION_BASED_UNIT('DEGREE',#1423)NAMED_UNIT(*)PLANE_ANGLE_UNIT());
#1426=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.253754059022E-2),#1420,
'closure',
'Maximum model space distance between geometric entities at asserted connectivities');
#1427=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((
#1426))GLOBAL_UNIT_ASSIGNED_CONTEXT((#1420,#1424,#1425))REPRESENTATION_CONTEXT(
'ID2','3'));
#1428=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#1429=DIRECTION('',(0.E0,0.E0,1.E0));
#1430=DIRECTION('',(1.E0,0.E0,0.E0));
#1433=MECHANICAL_CONTEXT('',#863,'mechanical');
#1434=PRODUCT('LAD4-3DSOLID_5931','LAD4-3DSOLID_5931','NOT SPECIFIED',(#1433));
#1435=PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE('1','LAST_VERSION',
#1434,.MADE.);
#1441=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#1442=DIRECTION('',(0.E0,0.E0,1.E0));
#1443=DIRECTION('',(1.E0,0.E0,0.E0));
#1444=AXIS2_PLACEMENT_3D('',#1441,#1442,#1443);
#1445=ITEM_DEFINED_TRANSFORMATION('','',#1431,#1444);
#1446=(REPRESENTATION_RELATIONSHIP('','',#1432,#874)REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#1445)SHAPE_REPRESENTATION_RELATIONSHIP());
#1447=CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#1446,#1440);
#1448=CARTESIAN_POINT('',(2.289127626369E2,1.752311153712E2,9.36E1));
#1449=DIRECTION('',(-1.E0,0.E0,0.E0));
#1450=DIRECTION('',(0.E0,-1.E0,0.E0));
#1451=AXIS2_PLACEMENT_3D('',#1448,#1449,#1450);
#1453=CARTESIAN_POINT('',(2.289127626369E2,1.752311153712E2,9.36E1));
#1454=DIRECTION('',(-1.E0,0.E0,0.E0));
#1455=DIRECTION('',(0.E0,1.E0,0.E0));
#1456=AXIS2_PLACEMENT_3D('',#1453,#1454,#1455);
#1458=CARTESIAN_POINT('',(2.289127626369E2,1.752311153712E2,7.02E1));
#1459=DIRECTION('',(-1.E0,0.E0,0.E0));
#1460=DIRECTION('',(0.E0,-1.E0,0.E0));
#1461=AXIS2_PLACEMENT_3D('',#1458,#1459,#1460);
#1463=CARTESIAN_POINT('',(2.289127626369E2,1.752311153712E2,7.02E1));
#1464=DIRECTION('',(-1.E0,0.E0,0.E0));
#1465=DIRECTION('',(0.E0,1.E0,0.E0));
#1466=AXIS2_PLACEMENT_3D('',#1463,#1464,#1465);
#1468=CARTESIAN_POINT('',(2.289127626369E2,1.752311153712E2,4.68E1));
#1469=DIRECTION('',(-1.E0,0.E0,0.E0));
#1470=DIRECTION('',(0.E0,-1.E0,0.E0));
#1471=AXIS2_PLACEMENT_3D('',#1468,#1469,#1470);
#1473=CARTESIAN_POINT('',(2.289127626369E2,1.752311153712E2,4.68E1));
#1474=DIRECTION('',(-1.E0,0.E0,0.E0));
#1475=DIRECTION('',(0.E0,1.E0,0.E0));
#1476=AXIS2_PLACEMENT_3D('',#1473,#1474,#1475);
#1478=CARTESIAN_POINT('',(2.289127626369E2,1.752311153712E2,2.34E1));
#1479=DIRECTION('',(-1.E0,0.E0,0.E0));
#1480=DIRECTION('',(0.E0,-1.E0,0.E0));
#1481=AXIS2_PLACEMENT_3D('',#1478,#1479,#1480);
#1483=CARTESIAN_POINT('',(2.289127626369E2,1.752311153712E2,2.34E1));
#1484=DIRECTION('',(-1.E0,0.E0,0.E0));
#1485=DIRECTION('',(0.E0,1.E0,0.E0));
#1486=AXIS2_PLACEMENT_3D('',#1483,#1484,#1485);
#1488=DIRECTION('',(0.E0,-1.E0,0.E0));
#1489=VECTOR('',#1488,1.E1);
#1490=CARTESIAN_POINT('',(2.289127626369E2,1.802311153712E2,1.17E2));
#1491=LINE('',#1490,#1489);
#1492=DIRECTION('',(0.E0,1.E0,0.E0));
#1493=VECTOR('',#1492,1.E1);
#1494=CARTESIAN_POINT('',(2.289127626369E2,1.702311153712E2,0.E0));
#1495=LINE('',#1494,#1493);
#1496=DIRECTION('',(0.E0,0.E0,-1.E0));
#1497=VECTOR('',#1496,1.17E2);
#1498=CARTESIAN_POINT('',(2.289127626369E2,1.702311153712E2,1.17E2));
#1499=LINE('',#1498,#1497);
#1500=DIRECTION('',(-1.E0,0.E0,0.E0));
#1501=VECTOR('',#1500,2.544377382727E0);
#1502=CARTESIAN_POINT('',(2.289127626369E2,1.722311153712E2,9.36E1));
#1503=LINE('',#1502,#1501);
#1504=DIRECTION('',(-1.E0,0.E0,0.E0));
#1505=VECTOR('',#1504,2.544377382727E0);
#1506=CARTESIAN_POINT('',(2.289127626369E2,1.782311153712E2,9.36E1));
#1507=LINE('',#1506,#1505);
#1508=CARTESIAN_POINT('',(2.263683852541E2,1.752311153712E2,9.36E1));
#1509=DIRECTION('',(1.E0,0.E0,0.E0));
#1510=DIRECTION('',(0.E0,-1.E0,0.E0));
#1511=AXIS2_PLACEMENT_3D('',#1508,#1509,#1510);
#1513=CARTESIAN_POINT('',(2.263683852541E2,1.752311153712E2,9.36E1));
#1514=DIRECTION('',(1.E0,0.E0,0.E0));
#1515=DIRECTION('',(0.E0,1.E0,0.E0));
#1516=AXIS2_PLACEMENT_3D('',#1513,#1514,#1515);
#1518=CARTESIAN_POINT('',(2.263683852541E2,1.752311153712E2,9.36E1));
#1519=DIRECTION('',(-1.E0,0.E0,0.E0));
#1520=DIRECTION('',(0.E0,-1.E0,0.E0));
#1521=AXIS2_PLACEMENT_3D('',#1518,#1519,#1520);
#1523=CARTESIAN_POINT('',(2.263683852541E2,1.752311153712E2,9.36E1));
#1524=DIRECTION('',(-1.E0,0.E0,0.E0));
#1525=DIRECTION('',(0.E0,1.E0,0.E0));
#1526=AXIS2_PLACEMENT_3D('',#1523,#1524,#1525);
#1528=DIRECTION('',(1.E0,0.E0,0.E0));
#1529=VECTOR('',#1528,3.455622617273E0);
#1530=CARTESIAN_POINT('',(2.229127626369E2,1.709311153712E2,9.36E1));
#1531=LINE('',#1530,#1529);
#1532=DIRECTION('',(1.E0,0.E0,0.E0));
#1533=VECTOR('',#1532,3.455622617273E0);
#1534=CARTESIAN_POINT('',(2.229127626369E2,1.795311153712E2,9.36E1));
#1535=LINE('',#1534,#1533);
#1536=CARTESIAN_POINT('',(2.229127626369E2,1.752311153712E2,9.36E1));
#1537=DIRECTION('',(1.E0,0.E0,0.E0));
#1538=DIRECTION('',(0.E0,-1.E0,0.E0));
#1539=AXIS2_PLACEMENT_3D('',#1536,#1537,#1538);
#1541=CARTESIAN_POINT('',(2.229127626369E2,1.752311153712E2,9.36E1));
#1542=DIRECTION('',(1.E0,0.E0,0.E0));
#1543=DIRECTION('',(0.E0,1.E0,0.E0));
#1544=AXIS2_PLACEMENT_3D('',#1541,#1542,#1543);
#1546=CARTESIAN_POINT('',(2.229127626369E2,1.752311153712E2,7.02E1));
#1547=DIRECTION('',(1.E0,0.E0,0.E0));
#1548=DIRECTION('',(0.E0,-1.E0,0.E0));
#1549=AXIS2_PLACEMENT_3D('',#1546,#1547,#1548);
#1551=CARTESIAN_POINT('',(2.229127626369E2,1.752311153712E2,7.02E1));
#1552=DIRECTION('',(1.E0,0.E0,0.E0));
#1553=DIRECTION('',(0.E0,1.E0,0.E0));
#1554=AXIS2_PLACEMENT_3D('',#1551,#1552,#1553);
#1556=CARTESIAN_POINT('',(2.229127626369E2,1.752311153712E2,4.68E1));
#1557=DIRECTION('',(1.E0,0.E0,0.E0));
#1558=DIRECTION('',(0.E0,-1.E0,0.E0));
#1559=AXIS2_PLACEMENT_3D('',#1556,#1557,#1558);
#1561=CARTESIAN_POINT('',(2.229127626369E2,1.752311153712E2,4.68E1));
#1562=DIRECTION('',(1.E0,0.E0,0.E0));
#1563=DIRECTION('',(0.E0,1.E0,0.E0));
#1564=AXIS2_PLACEMENT_3D('',#1561,#1562,#1563);
#1566=CARTESIAN_POINT('',(2.229127626369E2,1.752311153712E2,2.34E1));
#1567=DIRECTION('',(1.E0,0.E0,0.E0));
#1568=DIRECTION('',(0.E0,-1.E0,0.E0));
#1569=AXIS2_PLACEMENT_3D('',#1566,#1567,#1568);
#1571=CARTESIAN_POINT('',(2.229127626369E2,1.752311153712E2,2.34E1));
#1572=DIRECTION('',(1.E0,0.E0,0.E0));
#1573=DIRECTION('',(0.E0,1.E0,0.E0));
#1574=AXIS2_PLACEMENT_3D('',#1571,#1572,#1573);
#1576=DIRECTION('',(0.E0,1.E0,0.E0));
#1577=VECTOR('',#1576,1.E1);
#1578=CARTESIAN_POINT('',(2.229127626369E2,1.702311153712E2,1.17E2));
#1579=LINE('',#1578,#1577);
#1580=DIRECTION('',(0.E0,-1.E0,0.E0));
#1581=VECTOR('',#1580,1.E1);
#1582=CARTESIAN_POINT('',(2.229127626369E2,1.802311153712E2,0.E0));
#1583=LINE('',#1582,#1581);
#1584=DIRECTION('',(1.E0,0.E0,0.E0));
#1585=VECTOR('',#1584,3.455622617273E0);
#1586=CARTESIAN_POINT('',(2.229127626369E2,1.709311153712E2,7.02E1));
#1587=LINE('',#1586,#1585);
#1588=DIRECTION('',(1.E0,0.E0,0.E0));
#1589=VECTOR('',#1588,3.455622617273E0);
#1590=CARTESIAN_POINT('',(2.229127626369E2,1.795311153712E2,7.02E1));
#1591=LINE('',#1590,#1589);
#1592=CARTESIAN_POINT('',(2.263683852541E2,1.752311153712E2,7.02E1));
#1593=DIRECTION('',(1.E0,0.E0,0.E0));
#1594=DIRECTION('',(0.E0,-1.E0,0.E0));
#1595=AXIS2_PLACEMENT_3D('',#1592,#1593,#1594);
#1597=CARTESIAN_POINT('',(2.263683852541E2,1.752311153712E2,7.02E1));
#1598=DIRECTION('',(1.E0,0.E0,0.E0));
#1599=DIRECTION('',(0.E0,1.E0,0.E0));
#1600=AXIS2_PLACEMENT_3D('',#1597,#1598,#1599);
#1602=CARTESIAN_POINT('',(2.263683852541E2,1.752311153712E2,7.02E1));
#1603=DIRECTION('',(-1.E0,0.E0,0.E0));
#1604=DIRECTION('',(0.E0,-1.E0,0.E0));
#1605=AXIS2_PLACEMENT_3D('',#1602,#1603,#1604);
#1607=CARTESIAN_POINT('',(2.263683852541E2,1.752311153712E2,7.02E1));
#1608=DIRECTION('',(-1.E0,0.E0,0.E0));
#1609=DIRECTION('',(0.E0,1.E0,0.E0));
#1610=AXIS2_PLACEMENT_3D('',#1607,#1608,#1609);
#1612=DIRECTION('',(-1.E0,0.E0,0.E0));
#1613=VECTOR('',#1612,2.544377382727E0);
#1614=CARTESIAN_POINT('',(2.289127626369E2,1.722311153712E2,7.02E1));
#1615=LINE('',#1614,#1613);
#1616=DIRECTION('',(-1.E0,0.E0,0.E0));
#1617=VECTOR('',#1616,2.544377382727E0);
#1618=CARTESIAN_POINT('',(2.289127626369E2,1.782311153712E2,7.02E1));
#1619=LINE('',#1618,#1617);
#1620=DIRECTION('',(1.E0,0.E0,0.E0));
#1621=VECTOR('',#1620,3.455622617273E0);
#1622=CARTESIAN_POINT('',(2.229127626369E2,1.709311153712E2,4.68E1));
#1623=LINE('',#1622,#1621);
#1624=DIRECTION('',(1.E0,0.E0,0.E0));
#1625=VECTOR('',#1624,3.455622617273E0);
#1626=CARTESIAN_POINT('',(2.229127626369E2,1.795311153712E2,4.68E1));
#1627=LINE('',#1626,#1625);
#1628=CARTESIAN_POINT('',(2.263683852541E2,1.752311153712E2,4.68E1));
#1629=DIRECTION('',(1.E0,0.E0,0.E0));
#1630=DIRECTION('',(0.E0,-1.E0,0.E0));
#1631=AXIS2_PLACEMENT_3D('',#1628,#1629,#1630);
#1633=CARTESIAN_POINT('',(2.263683852541E2,1.752311153712E2,4.68E1));
#1634=DIRECTION('',(1.E0,0.E0,0.E0));
#1635=DIRECTION('',(0.E0,1.E0,0.E0));
#1636=AXIS2_PLACEMENT_3D('',#1633,#1634,#1635);
#1638=CARTESIAN_POINT('',(2.263683852541E2,1.752311153712E2,4.68E1));
#1639=DIRECTION('',(-1.E0,0.E0,0.E0));
#1640=DIRECTION('',(0.E0,-1.E0,0.E0));
#1641=AXIS2_PLACEMENT_3D('',#1638,#1639,#1640);
#1643=CARTESIAN_POINT('',(2.263683852541E2,1.752311153712E2,4.68E1));
#1644=DIRECTION('',(-1.E0,0.E0,0.E0));
#1645=DIRECTION('',(0.E0,1.E0,0.E0));
#1646=AXIS2_PLACEMENT_3D('',#1643,#1644,#1645);
#1648=DIRECTION('',(-1.E0,0.E0,0.E0));
#1649=VECTOR('',#1648,2.544377382727E0);
#1650=CARTESIAN_POINT('',(2.289127626369E2,1.722311153712E2,4.68E1));
#1651=LINE('',#1650,#1649);
#1652=DIRECTION('',(-1.E0,0.E0,0.E0));
#1653=VECTOR('',#1652,2.544377382727E0);
#1654=CARTESIAN_POINT('',(2.289127626369E2,1.782311153712E2,4.68E1));
#1655=LINE('',#1654,#1653);
#1656=DIRECTION('',(1.E0,0.E0,0.E0));
#1657=VECTOR('',#1656,3.455622617273E0);
#1658=CARTESIAN_POINT('',(2.229127626369E2,1.709311153712E2,2.34E1));
#1659=LINE('',#1658,#1657);
#1660=DIRECTION('',(1.E0,0.E0,0.E0));
#1661=VECTOR('',#1660,3.455622617273E0);
#1662=CARTESIAN_POINT('',(2.229127626369E2,1.795311153712E2,2.34E1));
#1663=LINE('',#1662,#1661);
#1664=CARTESIAN_POINT('',(2.263683852541E2,1.752311153712E2,2.34E1));
#1665=DIRECTION('',(1.E0,0.E0,0.E0));
#1666=DIRECTION('',(0.E0,-1.E0,0.E0));
#1667=AXIS2_PLACEMENT_3D('',#1664,#1665,#1666);
#1669=CARTESIAN_POINT('',(2.263683852541E2,1.752311153712E2,2.34E1));
#1670=DIRECTION('',(1.E0,0.E0,0.E0));
#1671=DIRECTION('',(0.E0,1.E0,0.E0));
#1672=AXIS2_PLACEMENT_3D('',#1669,#1670,#1671);
#1674=CARTESIAN_POINT('',(2.263683852541E2,1.752311153712E2,2.34E1));
#1675=DIRECTION('',(-1.E0,0.E0,0.E0));
#1676=DIRECTION('',(0.E0,-1.E0,0.E0));
#1677=AXIS2_PLACEMENT_3D('',#1674,#1675,#1676);
#1679=CARTESIAN_POINT('',(2.263683852541E2,1.752311153712E2,2.34E1));
#1680=DIRECTION('',(-1.E0,0.E0,0.E0));
#1681=DIRECTION('',(0.E0,1.E0,0.E0));
#1682=AXIS2_PLACEMENT_3D('',#1679,#1680,#1681);
#1684=DIRECTION('',(-1.E0,0.E0,0.E0));
#1685=VECTOR('',#1684,2.544377382727E0);
#1686=CARTESIAN_POINT('',(2.289127626369E2,1.722311153712E2,2.34E1));
#1687=LINE('',#1686,#1685);
#1688=DIRECTION('',(-1.E0,0.E0,0.E0));
#1689=VECTOR('',#1688,2.544377382727E0);
#1690=CARTESIAN_POINT('',(2.289127626369E2,1.782311153712E2,2.34E1));
#1691=LINE('',#1690,#1689);
#1692=DIRECTION('',(1.E0,0.E0,0.E0));
#1693=VECTOR('',#1692,6.E0);
#1694=CARTESIAN_POINT('',(2.229127626369E2,1.802311153712E2,1.17E2));
#1695=LINE('',#1694,#1693);
#1696=DIRECTION('',(0.E0,0.E0,1.E0));
#1697=VECTOR('',#1696,1.17E2);
#1698=CARTESIAN_POINT('',(2.229127626369E2,1.802311153712E2,0.E0));
#1699=LINE('',#1698,#1697);
#1700=DIRECTION('',(-1.E0,0.E0,0.E0));
#1701=VECTOR('',#1700,6.E0);
#1702=CARTESIAN_POINT('',(2.289127626369E2,1.802311153712E2,0.E0));
#1703=LINE('',#1702,#1701);
#1704=DIRECTION('',(0.E0,0.E0,-1.E0));
#1705=VECTOR('',#1704,1.17E2);
#1706=CARTESIAN_POINT('',(2.289127626369E2,1.802311153712E2,1.17E2));
#1707=LINE('',#1706,#1705);
#1708=DIRECTION('',(-1.E0,0.E0,0.E0));
#1709=VECTOR('',#1708,6.E0);
#1710=CARTESIAN_POINT('',(2.289127626369E2,1.702311153712E2,1.17E2));
#1711=LINE('',#1710,#1709);
#1712=DIRECTION('',(1.E0,0.E0,0.E0));
#1713=VECTOR('',#1712,6.E0);
#1714=CARTESIAN_POINT('',(2.229127626369E2,1.702311153712E2,0.E0));
#1715=LINE('',#1714,#1713);
#1716=DIRECTION('',(0.E0,0.E0,-1.E0));
#1717=VECTOR('',#1716,1.17E2);
#1718=CARTESIAN_POINT('',(2.229127626369E2,1.702311153712E2,1.17E2));
#1719=LINE('',#1718,#1717);
#1720=CARTESIAN_POINT('',(2.289127626369E2,1.702311153712E2,1.17E2));
#1721=CARTESIAN_POINT('',(2.229127626369E2,1.702311153712E2,1.17E2));
#1722=VERTEX_POINT('',#1720);
#1723=VERTEX_POINT('',#1721);
#1724=CARTESIAN_POINT('',(2.229127626369E2,1.802311153712E2,0.E0));
#1725=CARTESIAN_POINT('',(2.229127626369E2,1.702311153712E2,0.E0));
#1726=VERTEX_POINT('',#1724);
#1727=VERTEX_POINT('',#1725);
#1728=CARTESIAN_POINT('',(2.289127626369E2,1.802311153712E2,1.17E2));
#1729=VERTEX_POINT('',#1728);
#1730=CARTESIAN_POINT('',(2.289127626369E2,1.702311153712E2,0.E0));
#1731=VERTEX_POINT('',#1730);
#1732=CARTESIAN_POINT('',(2.229127626369E2,1.802311153712E2,1.17E2));
#1733=VERTEX_POINT('',#1732);
#1734=CARTESIAN_POINT('',(2.289127626369E2,1.802311153712E2,0.E0));
#1735=VERTEX_POINT('',#1734);
#1736=CARTESIAN_POINT('',(2.289127626369E2,1.782311153712E2,9.36E1));
#1737=CARTESIAN_POINT('',(2.263683852541E2,1.782311153712E2,9.36E1));
#1738=VERTEX_POINT('',#1736);
#1739=VERTEX_POINT('',#1737);
#1740=CARTESIAN_POINT('',(2.289127626369E2,1.722311153712E2,9.36E1));
#1741=CARTESIAN_POINT('',(2.263683852541E2,1.722311153712E2,9.36E1));
#1742=VERTEX_POINT('',#1740);
#1743=VERTEX_POINT('',#1741);
#1744=CARTESIAN_POINT('',(2.229127626369E2,1.795311153712E2,9.36E1));
#1745=CARTESIAN_POINT('',(2.263683852541E2,1.795311153712E2,9.36E1));
#1746=VERTEX_POINT('',#1744);
#1747=VERTEX_POINT('',#1745);
#1748=CARTESIAN_POINT('',(2.229127626369E2,1.709311153712E2,9.36E1));
#1749=CARTESIAN_POINT('',(2.263683852541E2,1.709311153712E2,9.36E1));
#1750=VERTEX_POINT('',#1748);
#1751=VERTEX_POINT('',#1749);
#1752=CARTESIAN_POINT('',(2.289127626369E2,1.782311153712E2,7.02E1));
#1753=CARTESIAN_POINT('',(2.263683852541E2,1.782311153712E2,7.02E1));
#1754=VERTEX_POINT('',#1752);
#1755=VERTEX_POINT('',#1753);
#1756=CARTESIAN_POINT('',(2.289127626369E2,1.722311153712E2,7.02E1));
#1757=CARTESIAN_POINT('',(2.263683852541E2,1.722311153712E2,7.02E1));
#1758=VERTEX_POINT('',#1756);
#1759=VERTEX_POINT('',#1757);
#1760=CARTESIAN_POINT('',(2.229127626369E2,1.795311153712E2,7.02E1));
#1761=CARTESIAN_POINT('',(2.263683852541E2,1.795311153712E2,7.02E1));
#1762=VERTEX_POINT('',#1760);
#1763=VERTEX_POINT('',#1761);
#1764=CARTESIAN_POINT('',(2.229127626369E2,1.709311153712E2,7.02E1));
#1765=CARTESIAN_POINT('',(2.263683852541E2,1.709311153712E2,7.02E1));
#1766=VERTEX_POINT('',#1764);
#1767=VERTEX_POINT('',#1765);
#1768=CARTESIAN_POINT('',(2.289127626369E2,1.782311153712E2,4.68E1));
#1769=CARTESIAN_POINT('',(2.263683852541E2,1.782311153712E2,4.68E1));
#1770=VERTEX_POINT('',#1768);
#1771=VERTEX_POINT('',#1769);
#1772=CARTESIAN_POINT('',(2.289127626369E2,1.722311153712E2,4.68E1));
#1773=CARTESIAN_POINT('',(2.263683852541E2,1.722311153712E2,4.68E1));
#1774=VERTEX_POINT('',#1772);
#1775=VERTEX_POINT('',#1773);
#1776=CARTESIAN_POINT('',(2.229127626369E2,1.795311153712E2,4.68E1));
#1777=CARTESIAN_POINT('',(2.263683852541E2,1.795311153712E2,4.68E1));
#1778=VERTEX_POINT('',#1776);
#1779=VERTEX_POINT('',#1777);
#1780=CARTESIAN_POINT('',(2.229127626369E2,1.709311153712E2,4.68E1));
#1781=CARTESIAN_POINT('',(2.263683852541E2,1.709311153712E2,4.68E1));
#1782=VERTEX_POINT('',#1780);
#1783=VERTEX_POINT('',#1781);
#1784=CARTESIAN_POINT('',(2.289127626369E2,1.782311153712E2,2.34E1));
#1785=CARTESIAN_POINT('',(2.263683852541E2,1.782311153712E2,2.34E1));
#1786=VERTEX_POINT('',#1784);
#1787=VERTEX_POINT('',#1785);
#1788=CARTESIAN_POINT('',(2.289127626369E2,1.722311153712E2,2.34E1));
#1789=CARTESIAN_POINT('',(2.263683852541E2,1.722311153712E2,2.34E1));
#1790=VERTEX_POINT('',#1788);
#1791=VERTEX_POINT('',#1789);
#1792=CARTESIAN_POINT('',(2.229127626369E2,1.795311153712E2,2.34E1));
#1793=CARTESIAN_POINT('',(2.263683852541E2,1.795311153712E2,2.34E1));
#1794=VERTEX_POINT('',#1792);
#1795=VERTEX_POINT('',#1793);
#1796=CARTESIAN_POINT('',(2.229127626369E2,1.709311153712E2,2.34E1));
#1797=CARTESIAN_POINT('',(2.263683852541E2,1.709311153712E2,2.34E1));
#1798=VERTEX_POINT('',#1796);
#1799=VERTEX_POINT('',#1797);
#1800=CARTESIAN_POINT('',(2.313138887917E2,1.752311153712E2,9.36E1));
#1801=DIRECTION('',(-1.E0,0.E0,0.E0));
#1802=DIRECTION('',(0.E0,-1.E0,0.E0));
#1803=AXIS2_PLACEMENT_3D('',#1800,#1801,#1802);
#1804=CYLINDRICAL_SURFACE('',#1803,3.E0);
#1806=ORIENTED_EDGE('',*,*,#1805,.T.);
#1808=ORIENTED_EDGE('',*,*,#1807,.T.);
#1810=ORIENTED_EDGE('',*,*,#1809,.T.);
#1812=ORIENTED_EDGE('',*,*,#1811,.F.);
#1813=EDGE_LOOP('',(#1806,#1808,#1810,#1812));
#1814=FACE_OUTER_BOUND('',#1813,.F.);
#1815=ADVANCED_FACE('',(#1814),#1804,.F.);
#1816=CARTESIAN_POINT('',(2.289127626369E2,1.802311153712E2,0.E0));
#1817=DIRECTION('',(1.E0,0.E0,0.E0));
#1818=DIRECTION('',(0.E0,0.E0,-1.E0));
#1819=AXIS2_PLACEMENT_3D('',#1816,#1817,#1818);
#1820=PLANE('',#1819);
#1822=ORIENTED_EDGE('',*,*,#1821,.F.);
#1824=ORIENTED_EDGE('',*,*,#1823,.T.);
#1826=ORIENTED_EDGE('',*,*,#1825,.F.);
#1828=ORIENTED_EDGE('',*,*,#1827,.F.);
#1829=EDGE_LOOP('',(#1822,#1824,#1826,#1828));
#1830=FACE_OUTER_BOUND('',#1829,.F.);
#1832=ORIENTED_EDGE('',*,*,#1831,.F.);
#1834=ORIENTED_EDGE('',*,*,#1833,.F.);
#1835=EDGE_LOOP('',(#1832,#1834));
#1836=FACE_BOUND('',#1835,.F.);
#1838=ORIENTED_EDGE('',*,*,#1837,.F.);
#1840=ORIENTED_EDGE('',*,*,#1839,.F.);
#1841=EDGE_LOOP('',(#1838,#1840));
#1842=FACE_BOUND('',#1841,.F.);
#1844=ORIENTED_EDGE('',*,*,#1843,.F.);
#1846=ORIENTED_EDGE('',*,*,#1845,.F.);
#1847=EDGE_LOOP('',(#1844,#1846));
#1848=FACE_BOUND('',#1847,.F.);
#1849=ORIENTED_EDGE('',*,*,#1805,.F.);
#1851=ORIENTED_EDGE('',*,*,#1850,.F.);
#1852=EDGE_LOOP('',(#1849,#1851));
#1853=FACE_BOUND('',#1852,.F.);
#1854=ADVANCED_FACE('',(#1830,#1836,#1842,#1848,#1853),#1820,.T.);
#1855=CARTESIAN_POINT('',(2.313138887917E2,1.752311153712E2,9.36E1));
#1856=DIRECTION('',(-1.E0,0.E0,0.E0));
#1857=DIRECTION('',(0.E0,-1.E0,0.E0));
#1858=AXIS2_PLACEMENT_3D('',#1855,#1856,#1857);
#1859=CYLINDRICAL_SURFACE('',#1858,3.E0);
#1860=ORIENTED_EDGE('',*,*,#1850,.T.);
#1861=ORIENTED_EDGE('',*,*,#1811,.T.);
#1863=ORIENTED_EDGE('',*,*,#1862,.T.);
#1864=ORIENTED_EDGE('',*,*,#1807,.F.);
#1865=EDGE_LOOP('',(#1860,#1861,#1863,#1864));
#1866=FACE_OUTER_BOUND('',#1865,.F.);
#1867=ADVANCED_FACE('',(#1866),#1859,.F.);
#1868=CARTESIAN_POINT('',(2.263683852541E2,1.709311153712E2,9.36E1));
#1869=DIRECTION('',(-1.E0,0.E0,0.E0));
#1870=DIRECTION('',(0.E0,0.E0,1.E0));
#1871=AXIS2_PLACEMENT_3D('',#1868,#1869,#1870);
#1872=PLANE('',#1871);
#1874=ORIENTED_EDGE('',*,*,#1873,.F.);
#1876=ORIENTED_EDGE('',*,*,#1875,.F.);
#1877=EDGE_LOOP('',(#1874,#1876));
#1878=FACE_OUTER_BOUND('',#1877,.F.);
#1879=ORIENTED_EDGE('',*,*,#1862,.F.);
#1880=ORIENTED_EDGE('',*,*,#1809,.F.);
#1881=EDGE_LOOP('',(#1879,#1880));
#1882=FACE_BOUND('',#1881,.F.);
#1883=ADVANCED_FACE('',(#1878,#1882),#1872,.T.);
#1884=CARTESIAN_POINT('',(2.213683852541E2,1.752311153712E2,9.36E1));
#1885=DIRECTION('',(1.E0,0.E0,0.E0));
#1886=DIRECTION('',(0.E0,-1.E0,0.E0));
#1887=AXIS2_PLACEMENT_3D('',#1884,#1885,#1886);
#1888=CYLINDRICAL_SURFACE('',#1887,4.3E0);
#1890=ORIENTED_EDGE('',*,*,#1889,.T.);
#1892=ORIENTED_EDGE('',*,*,#1891,.T.);
#1893=ORIENTED_EDGE('',*,*,#1873,.T.);
#1895=ORIENTED_EDGE('',*,*,#1894,.F.);
#1896=EDGE_LOOP('',(#1890,#1892,#1893,#1895));
#1897=FACE_OUTER_BOUND('',#1896,.F.);
#1898=ADVANCED_FACE('',(#1897),#1888,.F.);
#1899=CARTESIAN_POINT('',(2.229127626369E2,1.702311153712E2,0.E0));
#1900=DIRECTION('',(-1.E0,0.E0,0.E0));
#1901=DIRECTION('',(0.E0,0.E0,1.E0));
#1902=AXIS2_PLACEMENT_3D('',#1899,#1900,#1901);
#1903=PLANE('',#1902);
#1905=ORIENTED_EDGE('',*,*,#1904,.F.);
#1907=ORIENTED_EDGE('',*,*,#1906,.T.);
#1909=ORIENTED_EDGE('',*,*,#1908,.F.);
#1911=ORIENTED_EDGE('',*,*,#1910,.T.);
#1912=EDGE_LOOP('',(#1905,#1907,#1909,#1911));
#1913=FACE_OUTER_BOUND('',#1912,.F.);
#1915=ORIENTED_EDGE('',*,*,#1914,.F.);
#1917=ORIENTED_EDGE('',*,*,#1916,.F.);
#1918=EDGE_LOOP('',(#1915,#1917));
#1919=FACE_BOUND('',#1918,.F.);
#1921=ORIENTED_EDGE('',*,*,#1920,.F.);
#1923=ORIENTED_EDGE('',*,*,#1922,.F.);
#1924=EDGE_LOOP('',(#1921,#1923));
#1925=FACE_BOUND('',#1924,.F.);
#1927=ORIENTED_EDGE('',*,*,#1926,.F.);
#1929=ORIENTED_EDGE('',*,*,#1928,.F.);
#1930=EDGE_LOOP('',(#1927,#1929));
#1931=FACE_BOUND('',#1930,.F.);
#1933=ORIENTED_EDGE('',*,*,#1932,.F.);
#1934=ORIENTED_EDGE('',*,*,#1889,.F.);
#1935=EDGE_LOOP('',(#1933,#1934));
#1936=FACE_BOUND('',#1935,.F.);
#1937=ADVANCED_FACE('',(#1913,#1919,#1925,#1931,#1936),#1903,.T.);
#1938=CARTESIAN_POINT('',(2.213683852541E2,1.752311153712E2,9.36E1));
#1939=DIRECTION('',(1.E0,0.E0,0.E0));
#1940=DIRECTION('',(0.E0,-1.E0,0.E0));
#1941=AXIS2_PLACEMENT_3D('',#1938,#1939,#1940);
#1942=CYLINDRICAL_SURFACE('',#1941,4.3E0);
#1943=ORIENTED_EDGE('',*,*,#1932,.T.);
#1944=ORIENTED_EDGE('',*,*,#1894,.T.);
#1945=ORIENTED_EDGE('',*,*,#1875,.T.);
#1946=ORIENTED_EDGE('',*,*,#1891,.F.);
#1947=EDGE_LOOP('',(#1943,#1944,#1945,#1946));
#1948=FACE_OUTER_BOUND('',#1947,.F.);
#1949=ADVANCED_FACE('',(#1948),#1942,.F.);
#1950=CARTESIAN_POINT('',(2.213683852541E2,1.752311153712E2,7.02E1));
#1951=DIRECTION('',(1.E0,0.E0,0.E0));
#1952=DIRECTION('',(0.E0,-1.E0,0.E0));
#1953=AXIS2_PLACEMENT_3D('',#1950,#1951,#1952);
#1954=CYLINDRICAL_SURFACE('',#1953,4.3E0);
#1955=ORIENTED_EDGE('',*,*,#1914,.T.);
#1957=ORIENTED_EDGE('',*,*,#1956,.T.);
#1959=ORIENTED_EDGE('',*,*,#1958,.T.);
#1961=ORIENTED_EDGE('',*,*,#1960,.F.);
#1962=EDGE_LOOP('',(#1955,#1957,#1959,#1961));
#1963=FACE_OUTER_BOUND('',#1962,.F.);
#1964=ADVANCED_FACE('',(#1963),#1954,.F.);
#1965=CARTESIAN_POINT('',(2.213683852541E2,1.752311153712E2,7.02E1));
#1966=DIRECTION('',(1.E0,0.E0,0.E0));
#1967=DIRECTION('',(0.E0,-1.E0,0.E0));
#1968=AXIS2_PLACEMENT_3D('',#1965,#1966,#1967);
#1969=CYLINDRICAL_SURFACE('',#1968,4.3E0);
#1970=ORIENTED_EDGE('',*,*,#1916,.T.);
#1971=ORIENTED_EDGE('',*,*,#1960,.T.);
#1973=ORIENTED_EDGE('',*,*,#1972,.T.);
#1974=ORIENTED_EDGE('',*,*,#1956,.F.);
#1975=EDGE_LOOP('',(#1970,#1971,#1973,#1974));
#1976=FACE_OUTER_BOUND('',#1975,.F.);
#1977=ADVANCED_FACE('',(#1976),#1969,.F.);
#1978=CARTESIAN_POINT('',(2.263683852541E2,1.709311153712E2,7.02E1));
#1979=DIRECTION('',(-1.E0,0.E0,0.E0));
#1980=DIRECTION('',(0.E0,0.E0,1.E0));
#1981=AXIS2_PLACEMENT_3D('',#1978,#1979,#1980);
#1982=PLANE('',#1981);
#1983=ORIENTED_EDGE('',*,*,#1972,.F.);
#1984=ORIENTED_EDGE('',*,*,#1958,.F.);
#1985=EDGE_LOOP('',(#1983,#1984));
#1986=FACE_OUTER_BOUND('',#1985,.F.);
#1988=ORIENTED_EDGE('',*,*,#1987,.F.);
#1990=ORIENTED_EDGE('',*,*,#1989,.F.);
#1991=EDGE_LOOP('',(#1988,#1990));
#1992=FACE_BOUND('',#1991,.F.);
#1993=ADVANCED_FACE('',(#1986,#1992),#1982,.T.);
#1994=CARTESIAN_POINT('',(2.313138887917E2,1.752311153712E2,7.02E1));
#1995=DIRECTION('',(-1.E0,0.E0,0.E0));
#1996=DIRECTION('',(0.E0,-1.E0,0.E0));
#1997=AXIS2_PLACEMENT_3D('',#1994,#1995,#1996);
#1998=CYLINDRICAL_SURFACE('',#1997,3.E0);
#1999=ORIENTED_EDGE('',*,*,#1833,.T.);
#2001=ORIENTED_EDGE('',*,*,#2000,.T.);
#2002=ORIENTED_EDGE('',*,*,#1987,.T.);
#2004=ORIENTED_EDGE('',*,*,#2003,.F.);
#2005=EDGE_LOOP('',(#1999,#2001,#2002,#2004));
#2006=FACE_OUTER_BOUND('',#2005,.F.);
#2007=ADVANCED_FACE('',(#2006),#1998,.F.);
#2008=CARTESIAN_POINT('',(2.313138887917E2,1.752311153712E2,7.02E1));
#2009=DIRECTION('',(-1.E0,0.E0,0.E0));
#2010=DIRECTION('',(0.E0,-1.E0,0.E0));
#2011=AXIS2_PLACEMENT_3D('',#2008,#2009,#2010);
#2012=CYLINDRICAL_SURFACE('',#2011,3.E0);
#2013=ORIENTED_EDGE('',*,*,#1831,.T.);
#2014=ORIENTED_EDGE('',*,*,#2003,.T.);
#2015=ORIENTED_EDGE('',*,*,#1989,.T.);
#2016=ORIENTED_EDGE('',*,*,#2000,.F.);
#2017=EDGE_LOOP('',(#2013,#2014,#2015,#2016));
#2018=FACE_OUTER_BOUND('',#2017,.F.);
#2019=ADVANCED_FACE('',(#2018),#2012,.F.);
#2020=CARTESIAN_POINT('',(2.213683852541E2,1.752311153712E2,4.68E1));
#2021=DIRECTION('',(1.E0,0.E0,0.E0));
#2022=DIRECTION('',(0.E0,-1.E0,0.E0));
#2023=AXIS2_PLACEMENT_3D('',#2020,#2021,#2022);
#2024=CYLINDRICAL_SURFACE('',#2023,4.3E0);
#2025=ORIENTED_EDGE('',*,*,#1920,.T.);
#2027=ORIENTED_EDGE('',*,*,#2026,.T.);
#2029=ORIENTED_EDGE('',*,*,#2028,.T.);
#2031=ORIENTED_EDGE('',*,*,#2030,.F.);
#2032=EDGE_LOOP('',(#2025,#2027,#2029,#2031));
#2033=FACE_OUTER_BOUND('',#2032,.F.);
#2034=ADVANCED_FACE('',(#2033),#2024,.F.);
#2035=CARTESIAN_POINT('',(2.213683852541E2,1.752311153712E2,4.68E1));
#2036=DIRECTION('',(1.E0,0.E0,0.E0));
#2037=DIRECTION('',(0.E0,-1.E0,0.E0));
#2038=AXIS2_PLACEMENT_3D('',#2035,#2036,#2037);
#2039=CYLINDRICAL_SURFACE('',#2038,4.3E0);
#2040=ORIENTED_EDGE('',*,*,#1922,.T.);
#2041=ORIENTED_EDGE('',*,*,#2030,.T.);
#2043=ORIENTED_EDGE('',*,*,#2042,.T.);
#2044=ORIENTED_EDGE('',*,*,#2026,.F.);
#2045=EDGE_LOOP('',(#2040,#2041,#2043,#2044));
#2046=FACE_OUTER_BOUND('',#2045,.F.);
#2047=ADVANCED_FACE('',(#2046),#2039,.F.);
#2048=CARTESIAN_POINT('',(2.263683852541E2,1.709311153712E2,4.68E1));
#2049=DIRECTION('',(-1.E0,0.E0,0.E0));
#2050=DIRECTION('',(0.E0,0.E0,1.E0));
#2051=AXIS2_PLACEMENT_3D('',#2048,#2049,#2050);
#2052=PLANE('',#2051);
#2053=ORIENTED_EDGE('',*,*,#2042,.F.);
#2054=ORIENTED_EDGE('',*,*,#2028,.F.);
#2055=EDGE_LOOP('',(#2053,#2054));
#2056=FACE_OUTER_BOUND('',#2055,.F.);
#2058=ORIENTED_EDGE('',*,*,#2057,.F.);
#2060=ORIENTED_EDGE('',*,*,#2059,.F.);
#2061=EDGE_LOOP('',(#2058,#2060));
#2062=FACE_BOUND('',#2061,.F.);
#2063=ADVANCED_FACE('',(#2056,#2062),#2052,.T.);
#2064=CARTESIAN_POINT('',(2.313138887917E2,1.752311153712E2,4.68E1));
#2065=DIRECTION('',(-1.E0,0.E0,0.E0));
#2066=DIRECTION('',(0.E0,-1.E0,0.E0));
#2067=AXIS2_PLACEMENT_3D('',#2064,#2065,#2066);
#2068=CYLINDRICAL_SURFACE('',#2067,3.E0);
#2069=ORIENTED_EDGE('',*,*,#1839,.T.);
#2071=ORIENTED_EDGE('',*,*,#2070,.T.);
#2072=ORIENTED_EDGE('',*,*,#2057,.T.);
#2074=ORIENTED_EDGE('',*,*,#2073,.F.);
#2075=EDGE_LOOP('',(#2069,#2071,#2072,#2074));
#2076=FACE_OUTER_BOUND('',#2075,.F.);
#2077=ADVANCED_FACE('',(#2076),#2068,.F.);
#2078=CARTESIAN_POINT('',(2.313138887917E2,1.752311153712E2,4.68E1));
#2079=DIRECTION('',(-1.E0,0.E0,0.E0));
#2080=DIRECTION('',(0.E0,-1.E0,0.E0));
#2081=AXIS2_PLACEMENT_3D('',#2078,#2079,#2080);
#2082=CYLINDRICAL_SURFACE('',#2081,3.E0);
#2083=ORIENTED_EDGE('',*,*,#1837,.T.);
#2084=ORIENTED_EDGE('',*,*,#2073,.T.);
#2085=ORIENTED_EDGE('',*,*,#2059,.T.);
#2086=ORIENTED_EDGE('',*,*,#2070,.F.);
#2087=EDGE_LOOP('',(#2083,#2084,#2085,#2086));
#2088=FACE_OUTER_BOUND('',#2087,.F.);
#2089=ADVANCED_FACE('',(#2088),#2082,.F.);
#2090=CARTESIAN_POINT('',(2.213683852541E2,1.752311153712E2,2.34E1));
#2091=DIRECTION('',(1.E0,0.E0,0.E0));
#2092=DIRECTION('',(0.E0,-1.E0,0.E0));
#2093=AXIS2_PLACEMENT_3D('',#2090,#2091,#2092);
#2094=CYLINDRICAL_SURFACE('',#2093,4.3E0);
#2095=ORIENTED_EDGE('',*,*,#1926,.T.);
#2097=ORIENTED_EDGE('',*,*,#2096,.T.);
#2099=ORIENTED_EDGE('',*,*,#2098,.T.);
#2101=ORIENTED_EDGE('',*,*,#2100,.F.);
#2102=EDGE_LOOP('',(#2095,#2097,#2099,#2101));
#2103=FACE_OUTER_BOUND('',#2102,.F.);
#2104=ADVANCED_FACE('',(#2103),#2094,.F.);
#2105=CARTESIAN_POINT('',(2.213683852541E2,1.752311153712E2,2.34E1));
#2106=DIRECTION('',(1.E0,0.E0,0.E0));
#2107=DIRECTION('',(0.E0,-1.E0,0.E0));
#2108=AXIS2_PLACEMENT_3D('',#2105,#2106,#2107);
#2109=CYLINDRICAL_SURFACE('',#2108,4.3E0);
#2110=ORIENTED_EDGE('',*,*,#1928,.T.);
#2111=ORIENTED_EDGE('',*,*,#2100,.T.);
#2113=ORIENTED_EDGE('',*,*,#2112,.T.);
#2114=ORIENTED_EDGE('',*,*,#2096,.F.);
#2115=EDGE_LOOP('',(#2110,#2111,#2113,#2114));
#2116=FACE_OUTER_BOUND('',#2115,.F.);
#2117=ADVANCED_FACE('',(#2116),#2109,.F.);
#2118=CARTESIAN_POINT('',(2.263683852541E2,1.709311153712E2,2.34E1));
#2119=DIRECTION('',(-1.E0,0.E0,0.E0));
#2120=DIRECTION('',(0.E0,0.E0,1.E0));
#2121=AXIS2_PLACEMENT_3D('',#2118,#2119,#2120);
#2122=PLANE('',#2121);
#2123=ORIENTED_EDGE('',*,*,#2112,.F.);
#2124=ORIENTED_EDGE('',*,*,#2098,.F.);
#2125=EDGE_LOOP('',(#2123,#2124));
#2126=FACE_OUTER_BOUND('',#2125,.F.);
#2128=ORIENTED_EDGE('',*,*,#2127,.F.);
#2130=ORIENTED_EDGE('',*,*,#2129,.F.);
#2131=EDGE_LOOP('',(#2128,#2130));
#2132=FACE_BOUND('',#2131,.F.);
#2133=ADVANCED_FACE('',(#2126,#2132),#2122,.T.);
#2134=CARTESIAN_POINT('',(2.313138887917E2,1.752311153712E2,2.34E1));
#2135=DIRECTION('',(-1.E0,0.E0,0.E0));
#2136=DIRECTION('',(0.E0,-1.E0,0.E0));
#2137=AXIS2_PLACEMENT_3D('',#2134,#2135,#2136);
#2138=CYLINDRICAL_SURFACE('',#2137,3.E0);
#2139=ORIENTED_EDGE('',*,*,#1845,.T.);
#2141=ORIENTED_EDGE('',*,*,#2140,.T.);
#2142=ORIENTED_EDGE('',*,*,#2127,.T.);
#2144=ORIENTED_EDGE('',*,*,#2143,.F.);
#2145=EDGE_LOOP('',(#2139,#2141,#2142,#2144));
#2146=FACE_OUTER_BOUND('',#2145,.F.);
#2147=ADVANCED_FACE('',(#2146),#2138,.F.);
#2148=CARTESIAN_POINT('',(2.313138887917E2,1.752311153712E2,2.34E1));
#2149=DIRECTION('',(-1.E0,0.E0,0.E0));
#2150=DIRECTION('',(0.E0,-1.E0,0.E0));
#2151=AXIS2_PLACEMENT_3D('',#2148,#2149,#2150);
#2152=CYLINDRICAL_SURFACE('',#2151,3.E0);
#2153=ORIENTED_EDGE('',*,*,#1843,.T.);
#2154=ORIENTED_EDGE('',*,*,#2143,.T.);
#2155=ORIENTED_EDGE('',*,*,#2129,.T.);
#2156=ORIENTED_EDGE('',*,*,#2140,.F.);
#2157=EDGE_LOOP('',(#2153,#2154,#2155,#2156));
#2158=FACE_OUTER_BOUND('',#2157,.F.);
#2159=ADVANCED_FACE('',(#2158),#2152,.F.);
#2160=CARTESIAN_POINT('',(2.229127626369E2,1.802311153712E2,1.17E2));
#2161=DIRECTION('',(0.E0,0.E0,1.E0));
#2162=DIRECTION('',(1.E0,0.E0,0.E0));
#2163=AXIS2_PLACEMENT_3D('',#2160,#2161,#2162);
#2164=PLANE('',#2163);
#2166=ORIENTED_EDGE('',*,*,#2165,.T.);
#2167=ORIENTED_EDGE('',*,*,#1821,.T.);
#2169=ORIENTED_EDGE('',*,*,#2168,.T.);
#2170=ORIENTED_EDGE('',*,*,#1904,.T.);
#2171=EDGE_LOOP('',(#2166,#2167,#2169,#2170));
#2172=FACE_OUTER_BOUND('',#2171,.F.);
#2173=ADVANCED_FACE('',(#2172),#2164,.T.);
#2174=CARTESIAN_POINT('',(2.229127626369E2,1.802311153712E2,0.E0));
#2175=DIRECTION('',(0.E0,1.E0,0.E0));
#2176=DIRECTION('',(0.E0,0.E0,1.E0));
#2177=AXIS2_PLACEMENT_3D('',#2174,#2175,#2176);
#2178=PLANE('',#2177);
#2179=ORIENTED_EDGE('',*,*,#2165,.F.);
#2180=ORIENTED_EDGE('',*,*,#1910,.F.);
#2182=ORIENTED_EDGE('',*,*,#2181,.F.);
#2183=ORIENTED_EDGE('',*,*,#1823,.F.);
#2184=EDGE_LOOP('',(#2179,#2180,#2182,#2183));
#2185=FACE_OUTER_BOUND('',#2184,.F.);
#2186=ADVANCED_FACE('',(#2185),#2178,.T.);
#2187=CARTESIAN_POINT('',(2.259127626369E2,1.752311153712E2,0.E0));
#2188=DIRECTION('',(0.E0,0.E0,1.E0));
#2189=DIRECTION('',(1.E0,0.E0,0.E0));
#2190=AXIS2_PLACEMENT_3D('',#2187,#2188,#2189);
#2191=PLANE('',#2190);
#2192=ORIENTED_EDGE('',*,*,#1908,.T.);
#2194=ORIENTED_EDGE('',*,*,#2193,.T.);
#2195=ORIENTED_EDGE('',*,*,#1825,.T.);
#2196=ORIENTED_EDGE('',*,*,#2181,.T.);
#2197=EDGE_LOOP('',(#2192,#2194,#2195,#2196));
#2198=FACE_OUTER_BOUND('',#2197,.F.);
#2199=ADVANCED_FACE('',(#2198),#2191,.F.);
#2200=CARTESIAN_POINT('',(2.289127626369E2,1.702311153712E2,0.E0));
#2201=DIRECTION('',(0.E0,-1.E0,0.E0));
#2202=DIRECTION('',(0.E0,0.E0,-1.E0));
#2203=AXIS2_PLACEMENT_3D('',#2200,#2201,#2202);
#2204=PLANE('',#2203);
#2205=ORIENTED_EDGE('',*,*,#2168,.F.);
#2206=ORIENTED_EDGE('',*,*,#1827,.T.);
#2207=ORIENTED_EDGE('',*,*,#2193,.F.);
#2208=ORIENTED_EDGE('',*,*,#1906,.F.);
#2209=EDGE_LOOP('',(#2205,#2206,#2207,#2208));
#2210=FACE_OUTER_BOUND('',#2209,.F.);
#2211=ADVANCED_FACE('',(#2210),#2204,.T.);
#2212=CLOSED_SHELL('',(#1815,#1854,#1867,#1883,#1898,#1937,#1949,#1964,#1977,
#1993,#2007,#2019,#2034,#2047,#2063,#2077,#2089,#2104,#2117,#2133,#2147,#2159,
#2173,#2186,#2199,#2211));
#2213=MANIFOLD_SOLID_BREP('',#2212);
#2215=DIMENSIONAL_EXPONENTS(0.E0,0.E0,0.E0,0.E0,0.E0,0.E0,0.E0);
#2217=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(1.745329251994E-2),
#2216);
#2218=(CONVERSION_BASED_UNIT('DEGREE',#2217)NAMED_UNIT(*)PLANE_ANGLE_UNIT());
#2220=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.175750569726E-2),#2214,
'closure',
'Maximum model space distance between geometric entities at asserted connectivities');
#2221=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((
#2220))GLOBAL_UNIT_ASSIGNED_CONTEXT((#2214,#2218,#2219))REPRESENTATION_CONTEXT(
'ID3','3'));
#2222=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#2223=DIRECTION('',(0.E0,0.E0,1.E0));
#2224=DIRECTION('',(1.E0,0.E0,0.E0));
#2227=DESIGN_CONTEXT('',#863,'design');
#2228=MECHANICAL_CONTEXT('',#863,'mechanical');
#2229=PRODUCT('LAD4-3DSOLID_5938','LAD4-3DSOLID_5938','NOT SPECIFIED',(#2228));
#2230=PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE('1','LAST_VERSION',
#2229,.MADE.);
#2236=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#2237=DIRECTION('',(0.E0,0.E0,1.E0));
#2238=DIRECTION('',(1.E0,0.E0,0.E0));
#2239=AXIS2_PLACEMENT_3D('',#2236,#2237,#2238);
#2240=ITEM_DEFINED_TRANSFORMATION('','',#2225,#2239);
#2241=(REPRESENTATION_RELATIONSHIP('','',#2226,#874)REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#2240)SHAPE_REPRESENTATION_RELATIONSHIP());
#2242=CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#2241,#2235);
#2243=CARTESIAN_POINT('',(2.360619610031E2,1.752311153712E2,9.36E1));
#2244=DIRECTION('',(1.E0,0.E0,0.E0));
#2245=DIRECTION('',(0.E0,-8.660254037844E-1,5.E-1));
#2246=AXIS2_PLACEMENT_3D('',#2243,#2244,#2245);
#2248=CARTESIAN_POINT('',(2.360619610031E2,1.752311153712E2,9.36E1));
#2249=DIRECTION('',(1.E0,0.E0,0.E0));
#2250=DIRECTION('',(0.E0,8.660254037844E-1,-5.E-1));
#2251=AXIS2_PLACEMENT_3D('',#2248,#2249,#2250);
#2253=DIRECTION('',(-1.E0,0.E0,0.E0));
#2254=VECTOR('',#2253,1.E1);
#2255=CARTESIAN_POINT('',(2.360619610031E2,1.773961788807E2,9.235E1));
#2256=LINE('',#2255,#2254);
#2257=DIRECTION('',(-1.E0,0.E0,0.E0));
#2258=VECTOR('',#2257,1.E1);
#2259=CARTESIAN_POINT('',(2.360619610031E2,1.730660518617E2,9.485E1));
#2260=LINE('',#2259,#2258);
#2261=CARTESIAN_POINT('',(2.260619610031E2,1.752311153712E2,9.36E1));
#2262=DIRECTION('',(-1.E0,0.E0,0.E0));
#2263=DIRECTION('',(0.E0,-8.660254037844E-1,5.E-1));
#2264=AXIS2_PLACEMENT_3D('',#2261,#2262,#2263);
#2266=CARTESIAN_POINT('',(2.260619610031E2,1.752311153712E2,9.36E1));
#2267=DIRECTION('',(-1.E0,0.E0,0.E0));
#2268=DIRECTION('',(0.E0,8.660254037844E-1,-5.E-1));
#2269=AXIS2_PLACEMENT_3D('',#2266,#2267,#2268);
#2271=CARTESIAN_POINT('',(2.260619610031E2,1.752311153712E2,9.36E1));
#2272=DIRECTION('',(1.E0,0.E0,0.E0));
#2273=DIRECTION('',(0.E0,-8.660254037844E-1,5.E-1));
#2274=AXIS2_PLACEMENT_3D('',#2271,#2272,#2273);
#2276=CARTESIAN_POINT('',(2.260619610031E2,1.752311153712E2,9.36E1));
#2277=DIRECTION('',(1.E0,0.E0,0.E0));
#2278=DIRECTION('',(0.E0,8.660254037844E-1,-5.E-1));
#2279=AXIS2_PLACEMENT_3D('',#2276,#2277,#2278);
#2281=DIRECTION('',(-1.E0,0.E0,0.E0));
#2282=VECTOR('',#2281,1.460064288561E0);
#2283=CARTESIAN_POINT('',(2.245220252917E2,1.738413616879E2,8.984918879445E1));
#2284=LINE('',#2283,#2282);
#2285=DIRECTION('',(1.E0,0.E0,0.E0));
#2286=VECTOR('',#2285,1.460064288561E0);
#2287=CARTESIAN_POINT('',(2.230619610031E2,1.726776944241E2,9.052103240246E1));
#2288=LINE('',#2287,#2286);
#2289=DIRECTION('',(9.999999999893E-1,-3.998344700027E-6,2.308697583898E-6));
#2290=VECTOR('',#2289,3.000000000032E0);
#2291=CARTESIAN_POINT('',(2.230619610031E2,1.717670257511E2,9.559999307391E1));
#2292=LINE('',#2291,#2290);
#2293=DIRECTION('',(-1.E0,0.E0,0.E0));
#2294=VECTOR('',#2293,1.460064288561E0);
#2295=CARTESIAN_POINT('',(2.245220252917E2,1.766208690545E2,9.735081120555E1));
#2296=LINE('',#2295,#2294);
#2297=DIRECTION('',(1.E0,0.E0,0.E0));
#2298=VECTOR('',#2297,1.460064288561E0);
#2299=CARTESIAN_POINT('',(2.230619610031E2,1.777845363183E2,9.667896759754E1));
#2300=LINE('',#2299,#2298);
#2301=DIRECTION('',(1.E0,0.E0,0.E0));
#2302=VECTOR('',#2301,3.E0);
#2303=CARTESIAN_POINT('',(2.230619610031E2,1.786952169863E2,9.16E1));
#2304=LINE('',#2303,#2302);
#2305=CARTESIAN_POINT('',(2.230619610031E2,1.752311153712E2,9.36E1));
#2306=DIRECTION('',(-1.E0,0.E0,0.E0));
#2307=DIRECTION('',(0.E0,-6.383552367854E-1,-7.697418993849E-1));
#2308=AXIS2_PLACEMENT_3D('',#2305,#2306,#2307);
#2310=CARTESIAN_POINT('',(2.230619610031E2,1.752311153712E2,9.36E1));
#2311=DIRECTION('',(-1.E0,0.E0,0.E0));
#2312=DIRECTION('',(0.E0,-8.660254040301E-1,4.999999995744E-1));
#2313=AXIS2_PLACEMENT_3D('',#2310,#2311,#2312);
#2315=DIRECTION('',(0.E0,-5.E-1,-8.660254037844E-1));
#2316=VECTOR('',#2315,7.886349260938E0);
#2317=CARTESIAN_POINT('',(2.245220252917E2,1.766208690545E2,9.735081120555E1));
#2318=LINE('',#2317,#2316);
#2319=DIRECTION('',(0.E0,5.E-1,8.660254037844E-1));
#2320=VECTOR('',#2319,7.886349260938E0);
#2321=CARTESIAN_POINT('',(2.230619610031E2,1.726776944241E2,9.052103240246E1));
#2322=LINE('',#2321,#2320);
#2323=CARTESIAN_POINT('',(2.245220252917E2,1.752311153712E2,9.36E1));
#2324=DIRECTION('',(-1.E0,0.E0,0.E0));
#2325=DIRECTION('',(0.E0,-3.474384208320E-1,-9.377028013874E-1));
#2326=AXIS2_PLACEMENT_3D('',#2323,#2324,#2325);
#2328=DIRECTION('',(0.E0,-5.E-1,-8.660254037844E-1));
#2329=VECTOR('',#2328,7.886349260938E0);
#2330=CARTESIAN_POINT('',(2.245220252917E2,1.777845363183E2,9.667896759754E1));
#2331=LINE('',#2330,#2329);
#2332=CARTESIAN_POINT('',(2.245220252917E2,1.752311153712E2,9.36E1));
#2333=DIRECTION('',(-1.E0,0.E0,0.E0));
#2334=DIRECTION('',(0.E0,3.474384208320E-1,9.377028013874E-1));
#2335=AXIS2_PLACEMENT_3D('',#2332,#2333,#2334);
#2337=DIRECTION('',(0.E0,-5.E-1,-8.660254037844E-1));
#2338=VECTOR('',#2337,7.886349260938E0);
#2339=CARTESIAN_POINT('',(2.230619610031E2,1.777845363183E2,9.667896759754E1));
#2340=LINE('',#2339,#2338);
#2341=CARTESIAN_POINT('',(2.230619610031E2,1.752311153712E2,9.36E1));
#2342=DIRECTION('',(-1.E0,0.E0,0.E0));
#2343=DIRECTION('',(0.E0,8.660254037844E-1,-5.E-1));
#2344=AXIS2_PLACEMENT_3D('',#2341,#2342,#2343);
#2346=CARTESIAN_POINT('',(2.230619610031E2,1.752311153712E2,9.36E1));
#2347=DIRECTION('',(-1.E0,0.E0,0.E0));
#2348=DIRECTION('',(0.E0,6.383552367854E-1,7.697418993849E-1));
#2349=AXIS2_PLACEMENT_3D('',#2346,#2347,#2348);
#2351=CARTESIAN_POINT('',(2.230619610031E2,1.726776944241E2,9.052103240246E1));
#2352=CARTESIAN_POINT('',(2.230619610031E2,1.766208690545E2,9.735081120555E1));
#2353=VERTEX_POINT('',#2351);
#2354=VERTEX_POINT('',#2352);
#2355=CARTESIAN_POINT('',(2.245220252917E2,1.766208690545E2,9.735081120555E1));
#2356=CARTESIAN_POINT('',(2.245220252917E2,1.726776944241E2,9.052103240246E1));
#2357=VERTEX_POINT('',#2355);
#2358=VERTEX_POINT('',#2356);
#2359=CARTESIAN_POINT('',(2.245220252917E2,1.777845363183E2,9.667896759754E1));
#2360=CARTESIAN_POINT('',(2.245220252917E2,1.738413616879E2,8.984918879445E1));
#2361=VERTEX_POINT('',#2359);
#2362=VERTEX_POINT('',#2360);
#2363=CARTESIAN_POINT('',(2.230619610031E2,1.777845363183E2,9.667896759754E1));
#2364=CARTESIAN_POINT('',(2.230619610031E2,1.738413616879E2,8.984918879445E1));
#2365=VERTEX_POINT('',#2363);
#2366=VERTEX_POINT('',#2364);
#2367=CARTESIAN_POINT('',(2.360619610031E2,1.773961788807E2,9.235E1));
#2368=CARTESIAN_POINT('',(2.260619610031E2,1.773961788807E2,9.235E1));
#2369=VERTEX_POINT('',#2367);
#2370=VERTEX_POINT('',#2368);
#2371=CARTESIAN_POINT('',(2.360619610031E2,1.730660518617E2,9.485E1));
#2372=CARTESIAN_POINT('',(2.260619610031E2,1.730660518617E2,9.485E1));
#2373=VERTEX_POINT('',#2371);
#2374=VERTEX_POINT('',#2372);
#2375=CARTESIAN_POINT('',(2.230619610031E2,1.717670257511E2,9.559999307391E1));
#2376=CARTESIAN_POINT('',(2.260619610031E2,1.717670137561E2,9.56E1));
#2377=VERTEX_POINT('',#2375);
#2378=VERTEX_POINT('',#2376);
#2379=CARTESIAN_POINT('',(2.230619610031E2,1.786952169863E2,9.16E1));
#2380=CARTESIAN_POINT('',(2.260619610031E2,1.786952169863E2,9.16E1));
#2381=VERTEX_POINT('',#2379);
#2382=VERTEX_POINT('',#2380);
#2383=CARTESIAN_POINT('',(2.260619610031E2,1.752311153712E2,9.36E1));
#2384=DIRECTION('',(-1.E0,0.E0,0.E0));
#2385=DIRECTION('',(0.E0,-8.660254037844E-1,5.E-1));
#2386=AXIS2_PLACEMENT_3D('',#2383,#2384,#2385);
#2387=CYLINDRICAL_SURFACE('',#2386,2.5E0);
#2389=ORIENTED_EDGE('',*,*,#2388,.T.);
#2391=ORIENTED_EDGE('',*,*,#2390,.T.);
#2393=ORIENTED_EDGE('',*,*,#2392,.T.);
#2395=ORIENTED_EDGE('',*,*,#2394,.F.);
#2396=EDGE_LOOP('',(#2389,#2391,#2393,#2395));
#2397=FACE_OUTER_BOUND('',#2396,.F.);
#2398=ADVANCED_FACE('',(#2397),#2387,.T.);
#2399=CARTESIAN_POINT('',(2.360619610031E2,1.730660518617E2,9.485E1));
#2400=DIRECTION('',(-1.E0,0.E0,0.E0));
#2401=DIRECTION('',(0.E0,5.E-1,8.660254037844E-1));
#2402=AXIS2_PLACEMENT_3D('',#2399,#2400,#2401);
#2403=PLANE('',#2402);
#2405=ORIENTED_EDGE('',*,*,#2404,.F.);
#2406=ORIENTED_EDGE('',*,*,#2388,.F.);
#2407=EDGE_LOOP('',(#2405,#2406));
#2408=FACE_OUTER_BOUND('',#2407,.F.);
#2409=ADVANCED_FACE('',(#2408),#2403,.F.);
#2410=CARTESIAN_POINT('',(2.260619610031E2,1.752311153712E2,9.36E1));
#2411=DIRECTION('',(-1.E0,0.E0,0.E0));
#2412=DIRECTION('',(0.E0,-8.660254037844E-1,5.E-1));
#2413=AXIS2_PLACEMENT_3D('',#2410,#2411,#2412);
#2414=CYLINDRICAL_SURFACE('',#2413,2.5E0);
#2415=ORIENTED_EDGE('',*,*,#2404,.T.);
#2416=ORIENTED_EDGE('',*,*,#2394,.T.);
#2418=ORIENTED_EDGE('',*,*,#2417,.T.);
#2419=ORIENTED_EDGE('',*,*,#2390,.F.);
#2420=EDGE_LOOP('',(#2415,#2416,#2418,#2419));
#2421=FACE_OUTER_BOUND('',#2420,.F.);
#2422=ADVANCED_FACE('',(#2421),#2414,.T.);
#2423=CARTESIAN_POINT('',(2.260619610031E2,1.752311153712E2,9.36E1));
#2424=DIRECTION('',(-1.E0,0.E0,0.E0));
#2425=DIRECTION('',(0.E0,5.E-1,8.660254037844E-1));
#2426=AXIS2_PLACEMENT_3D('',#2423,#2424,#2425);
#2427=PLANE('',#2426);
#2429=ORIENTED_EDGE('',*,*,#2428,.F.);
#2431=ORIENTED_EDGE('',*,*,#2430,.F.);
#2432=EDGE_LOOP('',(#2429,#2431));
#2433=FACE_OUTER_BOUND('',#2432,.F.);
#2434=ORIENTED_EDGE('',*,*,#2392,.F.);
#2435=ORIENTED_EDGE('',*,*,#2417,.F.);
#2436=EDGE_LOOP('',(#2434,#2435));
#2437=FACE_BOUND('',#2436,.F.);
#2438=ADVANCED_FACE('',(#2433,#2437),#2427,.F.);
#2439=CARTESIAN_POINT('',(2.260619610031E2,1.752311153712E2,9.36E1));
#2440=DIRECTION('',(1.E0,0.E0,0.E0));
#2441=DIRECTION('',(0.E0,-8.660254037844E-1,5.E-1));
#2442=AXIS2_PLACEMENT_3D('',#2439,#2440,#2441);
#2443=CYLINDRICAL_SURFACE('',#2442,4.E0);
#2444=ORIENTED_EDGE('',*,*,#2428,.T.);
#2446=ORIENTED_EDGE('',*,*,#2445,.F.);
#2448=ORIENTED_EDGE('',*,*,#2447,.T.);
#2450=ORIENTED_EDGE('',*,*,#2449,.F.);
#2452=ORIENTED_EDGE('',*,*,#2451,.T.);
#2454=ORIENTED_EDGE('',*,*,#2453,.F.);
#2456=ORIENTED_EDGE('',*,*,#2455,.T.);
#2458=ORIENTED_EDGE('',*,*,#2457,.T.);
#2459=EDGE_LOOP('',(#2444,#2446,#2448,#2450,#2452,#2454,#2456,#2458));
#2460=FACE_OUTER_BOUND('',#2459,.F.);
#2461=ADVANCED_FACE('',(#2460),#2443,.T.);
#2462=CARTESIAN_POINT('',(2.260619610031E2,1.752311153712E2,9.36E1));
#2463=DIRECTION('',(1.E0,0.E0,0.E0));
#2464=DIRECTION('',(0.E0,-8.660254037844E-1,5.E-1));
#2465=AXIS2_PLACEMENT_3D('',#2462,#2463,#2464);
#2466=CYLINDRICAL_SURFACE('',#2465,4.E0);
#2467=ORIENTED_EDGE('',*,*,#2430,.T.);
#2468=ORIENTED_EDGE('',*,*,#2457,.F.);
#2470=ORIENTED_EDGE('',*,*,#2469,.T.);
#2472=ORIENTED_EDGE('',*,*,#2471,.F.);
#2474=ORIENTED_EDGE('',*,*,#2473,.T.);
#2476=ORIENTED_EDGE('',*,*,#2475,.F.);
#2478=ORIENTED_EDGE('',*,*,#2477,.T.);
#2479=ORIENTED_EDGE('',*,*,#2445,.T.);
#2480=EDGE_LOOP('',(#2467,#2468,#2470,#2472,#2474,#2476,#2478,#2479));
#2481=FACE_OUTER_BOUND('',#2480,.F.);
#2482=ADVANCED_FACE('',(#2481),#2466,.T.);
#2483=CARTESIAN_POINT('',(2.230619610031E2,1.717670137561E2,9.56E1));
#2484=DIRECTION('',(-1.E0,0.E0,0.E0));
#2485=DIRECTION('',(0.E0,5.E-1,8.660254037844E-1));
#2486=AXIS2_PLACEMENT_3D('',#2483,#2484,#2485);
#2487=PLANE('',#2486);
#2488=ORIENTED_EDGE('',*,*,#2455,.F.);
#2490=ORIENTED_EDGE('',*,*,#2489,.T.);
#2491=ORIENTED_EDGE('',*,*,#2469,.F.);
#2492=EDGE_LOOP('',(#2488,#2490,#2491));
#2493=FACE_OUTER_BOUND('',#2492,.F.);
#2494=ADVANCED_FACE('',(#2493),#2487,.T.);
#2495=CARTESIAN_POINT('',(2.245220252917E2,1.720500089001E2,8.943384918383E1));
#2496=DIRECTION('',(0.E0,8.660254037844E-1,-5.E-1));
#2497=DIRECTION('',(0.E0,-5.E-1,-8.660254037844E-1));
#2498=AXIS2_PLACEMENT_3D('',#2495,#2496,#2497);
#2499=PLANE('',#2498);
#2500=ORIENTED_EDGE('',*,*,#2453,.T.);
#2502=ORIENTED_EDGE('',*,*,#2501,.F.);
#2503=ORIENTED_EDGE('',*,*,#2471,.T.);
#2504=ORIENTED_EDGE('',*,*,#2489,.F.);
#2505=EDGE_LOOP('',(#2500,#2502,#2503,#2504));
#2506=FACE_OUTER_BOUND('',#2505,.F.);
#2507=ADVANCED_FACE('',(#2506),#2499,.T.);
#2508=CARTESIAN_POINT('',(2.245220252917E2,1.752311153712E2,9.36E1));
#2509=DIRECTION('',(1.E0,0.E0,0.E0));
#2510=DIRECTION('',(0.E0,-5.E-1,-8.660254037844E-1));
#2511=AXIS2_PLACEMENT_3D('',#2508,#2509,#2510);
#2512=PLANE('',#2511);
#2513=ORIENTED_EDGE('',*,*,#2451,.F.);
#2515=ORIENTED_EDGE('',*,*,#2514,.F.);
#2516=ORIENTED_EDGE('',*,*,#2473,.F.);
#2517=ORIENTED_EDGE('',*,*,#2501,.T.);
#2518=EDGE_LOOP('',(#2513,#2515,#2516,#2517));
#2519=FACE_OUTER_BOUND('',#2518,.F.);
#2520=ADVANCED_FACE('',(#2519),#2512,.F.);
#2521=CARTESIAN_POINT('',(2.245220252917E2,1.784122218423E2,9.776615081617E1));
#2522=DIRECTION('',(0.E0,-8.660254037844E-1,5.E-1));
#2523=DIRECTION('',(0.E0,5.E-1,8.660254037844E-1));
#2524=AXIS2_PLACEMENT_3D('',#2521,#2522,#2523);
#2525=PLANE('',#2524);
#2526=ORIENTED_EDGE('',*,*,#2449,.T.);
#2528=ORIENTED_EDGE('',*,*,#2527,.F.);
#2529=ORIENTED_EDGE('',*,*,#2475,.T.);
#2530=ORIENTED_EDGE('',*,*,#2514,.T.);
#2531=EDGE_LOOP('',(#2526,#2528,#2529,#2530));
#2532=FACE_OUTER_BOUND('',#2531,.F.);
#2533=ADVANCED_FACE('',(#2532),#2525,.T.);
#2534=CARTESIAN_POINT('',(2.230619610031E2,1.717670137561E2,9.56E1));
#2535=DIRECTION('',(-1.E0,0.E0,0.E0));
#2536=DIRECTION('',(0.E0,5.E-1,8.660254037844E-1));
#2537=AXIS2_PLACEMENT_3D('',#2534,#2535,#2536);
#2538=PLANE('',#2537);
#2539=ORIENTED_EDGE('',*,*,#2527,.T.);
#2540=ORIENTED_EDGE('',*,*,#2447,.F.);
#2541=ORIENTED_EDGE('',*,*,#2477,.F.);
#2542=EDGE_LOOP('',(#2539,#2540,#2541));
#2543=FACE_OUTER_BOUND('',#2542,.F.);
#2544=ADVANCED_FACE('',(#2543),#2538,.T.);
#2545=CLOSED_SHELL('',(#2398,#2409,#2422,#2438,#2461,#2482,#2494,#2507,#2520,
#2533,#2544));
#2546=MANIFOLD_SOLID_BREP('',#2545);
#2548=DIMENSIONAL_EXPONENTS(0.E0,0.E0,0.E0,0.E0,0.E0,0.E0,0.E0);
#2550=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(1.745329251994E-2),
#2549);
#2551=(CONVERSION_BASED_UNIT('DEGREE',#2550)NAMED_UNIT(*)PLANE_ANGLE_UNIT());
#2553=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(2.019931699834E-3),#2547,
'closure',
'Maximum model space distance between geometric entities at asserted connectivities');
#2554=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((
#2553))GLOBAL_UNIT_ASSIGNED_CONTEXT((#2547,#2551,#2552))REPRESENTATION_CONTEXT(
'ID4','3'));
#2555=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#2556=DIRECTION('',(0.E0,0.E0,1.E0));
#2557=DIRECTION('',(1.E0,0.E0,0.E0));
#2560=MECHANICAL_CONTEXT('',#863,'mechanical');
#2561=PRODUCT('LAD4-3DSOLID_5964','LAD4-3DSOLID_5964','NOT SPECIFIED',(#2560));
#2562=PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE('1','LAST_VERSION',
#2561,.MADE.);
#2568=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#2569=DIRECTION('',(0.E0,0.E0,1.E0));
#2570=DIRECTION('',(1.E0,0.E0,0.E0));
#2571=AXIS2_PLACEMENT_3D('',#2568,#2569,#2570);
#2572=ITEM_DEFINED_TRANSFORMATION('','',#2558,#2571);
#2573=(REPRESENTATION_RELATIONSHIP('','',#2559,#874)REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#2572)SHAPE_REPRESENTATION_RELATIONSHIP());
#2574=CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#2573,#2567);
#2575=CARTESIAN_POINT('',(2.360619610031E2,1.752311153712E2,7.02E1));
#2576=DIRECTION('',(1.E0,0.E0,0.E0));
#2577=DIRECTION('',(0.E0,-8.660254037844E-1,5.E-1));
#2578=AXIS2_PLACEMENT_3D('',#2575,#2576,#2577);
#2580=CARTESIAN_POINT('',(2.360619610031E2,1.752311153712E2,7.02E1));
#2581=DIRECTION('',(1.E0,0.E0,0.E0));
#2582=DIRECTION('',(0.E0,8.660254037844E-1,-5.E-1));
#2583=AXIS2_PLACEMENT_3D('',#2580,#2581,#2582);
#2585=DIRECTION('',(-1.E0,0.E0,0.E0));
#2586=VECTOR('',#2585,1.E1);
#2587=CARTESIAN_POINT('',(2.360619610031E2,1.773961788807E2,6.895E1));
#2588=LINE('',#2587,#2586);
#2589=DIRECTION('',(-1.E0,0.E0,0.E0));
#2590=VECTOR('',#2589,1.E1);
#2591=CARTESIAN_POINT('',(2.360619610031E2,1.730660518617E2,7.145E1));
#2592=LINE('',#2591,#2590);
#2593=CARTESIAN_POINT('',(2.260619610031E2,1.752311153712E2,7.02E1));
#2594=DIRECTION('',(-1.E0,0.E0,0.E0));
#2595=DIRECTION('',(0.E0,-8.660254037844E-1,5.E-1));
#2596=AXIS2_PLACEMENT_3D('',#2593,#2594,#2595);
#2598=CARTESIAN_POINT('',(2.260619610031E2,1.752311153712E2,7.02E1));
#2599=DIRECTION('',(-1.E0,0.E0,0.E0));
#2600=DIRECTION('',(0.E0,8.660254037844E-1,-5.E-1));
#2601=AXIS2_PLACEMENT_3D('',#2598,#2599,#2600);
#2603=CARTESIAN_POINT('',(2.260619610031E2,1.752311153712E2,7.02E1));
#2604=DIRECTION('',(1.E0,0.E0,0.E0));
#2605=DIRECTION('',(0.E0,-8.660254037844E-1,5.E-1));
#2606=AXIS2_PLACEMENT_3D('',#2603,#2604,#2605);
#2608=CARTESIAN_POINT('',(2.260619610031E2,1.752311153712E2,7.02E1));
#2609=DIRECTION('',(1.E0,0.E0,0.E0));
#2610=DIRECTION('',(0.E0,8.660254037844E-1,-5.E-1));
#2611=AXIS2_PLACEMENT_3D('',#2608,#2609,#2610);
#2613=DIRECTION('',(-1.E0,0.E0,0.E0));
#2614=VECTOR('',#2613,1.460064288561E0);
#2615=CARTESIAN_POINT('',(2.245220252917E2,1.738413616879E2,6.644918879445E1));
#2616=LINE('',#2615,#2614);
#2617=DIRECTION('',(1.E0,0.E0,0.E0));
#2618=VECTOR('',#2617,1.460064288561E0);
#2619=CARTESIAN_POINT('',(2.230619610031E2,1.726776944241E2,6.712103240246E1));
#2620=LINE('',#2619,#2618);
#2621=DIRECTION('',(9.999999999893E-1,-3.998344700027E-6,2.308697583898E-6));
#2622=VECTOR('',#2621,3.000000000032E0);
#2623=CARTESIAN_POINT('',(2.230619610031E2,1.717670257511E2,7.219999307391E1));
#2624=LINE('',#2623,#2622);
#2625=DIRECTION('',(-1.E0,1.946606711299E-14,0.E0));
#2626=VECTOR('',#2625,1.460064288561E0);
#2627=CARTESIAN_POINT('',(2.245220252917E2,1.766208690545E2,7.395081120555E1));
#2628=LINE('',#2627,#2626);
#2629=DIRECTION('',(1.E0,0.E0,0.E0));
#2630=VECTOR('',#2629,1.460064288561E0);
#2631=CARTESIAN_POINT('',(2.230619610031E2,1.777845363183E2,7.327896759754E1));
#2632=LINE('',#2631,#2630);
#2633=DIRECTION('',(1.E0,0.E0,0.E0));
#2634=VECTOR('',#2633,3.E0);
#2635=CARTESIAN_POINT('',(2.230619610031E2,1.786952169863E2,6.82E1));
#2636=LINE('',#2635,#2634);
#2637=CARTESIAN_POINT('',(2.230619610031E2,1.752311153712E2,7.02E1));
#2638=DIRECTION('',(-1.E0,0.E0,0.E0));
#2639=DIRECTION('',(0.E0,-6.383552367853E-1,-7.697418993849E-1));
#2640=AXIS2_PLACEMENT_3D('',#2637,#2638,#2639);
#2642=CARTESIAN_POINT('',(2.230619610031E2,1.752311153712E2,7.02E1));
#2643=DIRECTION('',(-1.E0,0.E0,0.E0));
#2644=DIRECTION('',(0.E0,-8.660254040301E-1,4.999999995744E-1));
#2645=AXIS2_PLACEMENT_3D('',#2642,#2643,#2644);
#2647=DIRECTION('',(0.E0,-5.E-1,-8.660254037844E-1));
#2648=VECTOR('',#2647,7.886349260938E0);
#2649=CARTESIAN_POINT('',(2.245220252917E2,1.766208690545E2,7.395081120555E1));
#2650=LINE('',#2649,#2648);
#2651=DIRECTION('',(0.E0,5.E-1,8.660254037844E-1));
#2652=VECTOR('',#2651,7.886349260938E0);
#2653=CARTESIAN_POINT('',(2.230619610031E2,1.726776944241E2,6.712103240246E1));
#2654=LINE('',#2653,#2652);
#2655=CARTESIAN_POINT('',(2.245220252917E2,1.752311153712E2,7.02E1));
#2656=DIRECTION('',(-1.E0,0.E0,0.E0));
#2657=DIRECTION('',(0.E0,-3.474384208320E-1,-9.377028013874E-1));
#2658=AXIS2_PLACEMENT_3D('',#2655,#2656,#2657);
#2660=DIRECTION('',(0.E0,-5.E-1,-8.660254037844E-1));
#2661=VECTOR('',#2660,7.886349260938E0);
#2662=CARTESIAN_POINT('',(2.245220252917E2,1.777845363183E2,7.327896759754E1));
#2663=LINE('',#2662,#2661);
#2664=CARTESIAN_POINT('',(2.245220252917E2,1.752311153712E2,7.02E1));
#2665=DIRECTION('',(-1.E0,0.E0,0.E0));
#2666=DIRECTION('',(0.E0,3.474384208320E-1,9.377028013874E-1));
#2667=AXIS2_PLACEMENT_3D('',#2664,#2665,#2666);
#2669=DIRECTION('',(0.E0,-5.E-1,-8.660254037844E-1));
#2670=VECTOR('',#2669,7.886349260938E0);
#2671=CARTESIAN_POINT('',(2.230619610031E2,1.777845363183E2,7.327896759754E1));
#2672=LINE('',#2671,#2670);
#2673=CARTESIAN_POINT('',(2.230619610031E2,1.752311153712E2,7.02E1));
#2674=DIRECTION('',(-1.E0,0.E0,0.E0));
#2675=DIRECTION('',(0.E0,8.660254037844E-1,-5.E-1));
#2676=AXIS2_PLACEMENT_3D('',#2673,#2674,#2675);
#2678=CARTESIAN_POINT('',(2.230619610031E2,1.752311153712E2,7.02E1));
#2679=DIRECTION('',(-1.E0,0.E0,0.E0));
#2680=DIRECTION('',(0.E0,6.383552367854E-1,7.697418993849E-1));
#2681=AXIS2_PLACEMENT_3D('',#2678,#2679,#2680);
#2683=CARTESIAN_POINT('',(2.230619610031E2,1.726776944241E2,6.712103240246E1));
#2684=CARTESIAN_POINT('',(2.230619610031E2,1.766208690545E2,7.395081120555E1));
#2685=VERTEX_POINT('',#2683);
#2686=VERTEX_POINT('',#2684);
#2687=CARTESIAN_POINT('',(2.245220252917E2,1.766208690545E2,7.395081120555E1));
#2688=CARTESIAN_POINT('',(2.245220252917E2,1.726776944241E2,6.712103240246E1));
#2689=VERTEX_POINT('',#2687);
#2690=VERTEX_POINT('',#2688);
#2691=CARTESIAN_POINT('',(2.245220252917E2,1.777845363183E2,7.327896759754E1));
#2692=CARTESIAN_POINT('',(2.245220252917E2,1.738413616879E2,6.644918879445E1));
#2693=VERTEX_POINT('',#2691);
#2694=VERTEX_POINT('',#2692);
#2695=CARTESIAN_POINT('',(2.230619610031E2,1.777845363183E2,7.327896759754E1));
#2696=CARTESIAN_POINT('',(2.230619610031E2,1.738413616879E2,6.644918879445E1));
#2697=VERTEX_POINT('',#2695);
#2698=VERTEX_POINT('',#2696);
#2699=CARTESIAN_POINT('',(2.360619610031E2,1.773961788807E2,6.895E1));
#2700=CARTESIAN_POINT('',(2.260619610031E2,1.773961788807E2,6.895E1));
#2701=VERTEX_POINT('',#2699);
#2702=VERTEX_POINT('',#2700);
#2703=CARTESIAN_POINT('',(2.360619610031E2,1.730660518617E2,7.145E1));
#2704=CARTESIAN_POINT('',(2.260619610031E2,1.730660518617E2,7.145E1));
#2705=VERTEX_POINT('',#2703);
#2706=VERTEX_POINT('',#2704);
#2707=CARTESIAN_POINT('',(2.230619610031E2,1.717670257511E2,7.219999307391E1));
#2708=CARTESIAN_POINT('',(2.260619610031E2,1.717670137561E2,7.22E1));
#2709=VERTEX_POINT('',#2707);
#2710=VERTEX_POINT('',#2708);
#2711=CARTESIAN_POINT('',(2.230619610031E2,1.786952169863E2,6.82E1));
#2712=CARTESIAN_POINT('',(2.260619610031E2,1.786952169863E2,6.82E1));
#2713=VERTEX_POINT('',#2711);
#2714=VERTEX_POINT('',#2712);
#2715=CARTESIAN_POINT('',(2.260619610031E2,1.752311153712E2,7.02E1));
#2716=DIRECTION('',(-1.E0,0.E0,0.E0));
#2717=DIRECTION('',(0.E0,-8.660254037844E-1,5.E-1));
#2718=AXIS2_PLACEMENT_3D('',#2715,#2716,#2717);
#2719=CYLINDRICAL_SURFACE('',#2718,2.5E0);
#2721=ORIENTED_EDGE('',*,*,#2720,.T.);
#2723=ORIENTED_EDGE('',*,*,#2722,.T.);
#2725=ORIENTED_EDGE('',*,*,#2724,.T.);
#2727=ORIENTED_EDGE('',*,*,#2726,.F.);
#2728=EDGE_LOOP('',(#2721,#2723,#2725,#2727));
#2729=FACE_OUTER_BOUND('',#2728,.F.);
#2730=ADVANCED_FACE('',(#2729),#2719,.T.);
#2731=CARTESIAN_POINT('',(2.360619610031E2,1.730660518617E2,7.145E1));
#2732=DIRECTION('',(-1.E0,0.E0,0.E0));
#2733=DIRECTION('',(0.E0,5.E-1,8.660254037844E-1));
#2734=AXIS2_PLACEMENT_3D('',#2731,#2732,#2733);
#2735=PLANE('',#2734);
#2737=ORIENTED_EDGE('',*,*,#2736,.F.);
#2738=ORIENTED_EDGE('',*,*,#2720,.F.);
#2739=EDGE_LOOP('',(#2737,#2738));
#2740=FACE_OUTER_BOUND('',#2739,.F.);
#2741=ADVANCED_FACE('',(#2740),#2735,.F.);
#2742=CARTESIAN_POINT('',(2.260619610031E2,1.752311153712E2,7.02E1));
#2743=DIRECTION('',(-1.E0,0.E0,0.E0));
#2744=DIRECTION('',(0.E0,-8.660254037844E-1,5.E-1));
#2745=AXIS2_PLACEMENT_3D('',#2742,#2743,#2744);
#2746=CYLINDRICAL_SURFACE('',#2745,2.5E0);
#2747=ORIENTED_EDGE('',*,*,#2736,.T.);
#2748=ORIENTED_EDGE('',*,*,#2726,.T.);
#2750=ORIENTED_EDGE('',*,*,#2749,.T.);
#2751=ORIENTED_EDGE('',*,*,#2722,.F.);
#2752=EDGE_LOOP('',(#2747,#2748,#2750,#2751));
#2753=FACE_OUTER_BOUND('',#2752,.F.);
#2754=ADVANCED_FACE('',(#2753),#2746,.T.);
#2755=CARTESIAN_POINT('',(2.260619610031E2,1.752311153712E2,7.02E1));
#2756=DIRECTION('',(-1.E0,0.E0,0.E0));
#2757=DIRECTION('',(0.E0,5.E-1,8.660254037844E-1));
#2758=AXIS2_PLACEMENT_3D('',#2755,#2756,#2757);
#2759=PLANE('',#2758);
#2761=ORIENTED_EDGE('',*,*,#2760,.F.);
#2763=ORIENTED_EDGE('',*,*,#2762,.F.);
#2764=EDGE_LOOP('',(#2761,#2763));
#2765=FACE_OUTER_BOUND('',#2764,.F.);
#2766=ORIENTED_EDGE('',*,*,#2724,.F.);
#2767=ORIENTED_EDGE('',*,*,#2749,.F.);
#2768=EDGE_LOOP('',(#2766,#2767));
#2769=FACE_BOUND('',#2768,.F.);
#2770=ADVANCED_FACE('',(#2765,#2769),#2759,.F.);
#2771=CARTESIAN_POINT('',(2.260619610031E2,1.752311153712E2,7.02E1));
#2772=DIRECTION('',(1.E0,0.E0,0.E0));
#2773=DIRECTION('',(0.E0,-8.660254037844E-1,5.E-1));
#2774=AXIS2_PLACEMENT_3D('',#2771,#2772,#2773);
#2775=CYLINDRICAL_SURFACE('',#2774,4.E0);
#2776=ORIENTED_EDGE('',*,*,#2760,.T.);
#2778=ORIENTED_EDGE('',*,*,#2777,.F.);
#2780=ORIENTED_EDGE('',*,*,#2779,.T.);
#2782=ORIENTED_EDGE('',*,*,#2781,.F.);
#2784=ORIENTED_EDGE('',*,*,#2783,.T.);
#2786=ORIENTED_EDGE('',*,*,#2785,.F.);
#2788=ORIENTED_EDGE('',*,*,#2787,.T.);
#2790=ORIENTED_EDGE('',*,*,#2789,.T.);
#2791=EDGE_LOOP('',(#2776,#2778,#2780,#2782,#2784,#2786,#2788,#2790));
#2792=FACE_OUTER_BOUND('',#2791,.F.);
#2793=ADVANCED_FACE('',(#2792),#2775,.T.);
#2794=CARTESIAN_POINT('',(2.260619610031E2,1.752311153712E2,7.02E1));
#2795=DIRECTION('',(1.E0,0.E0,0.E0));
#2796=DIRECTION('',(0.E0,-8.660254037844E-1,5.E-1));
#2797=AXIS2_PLACEMENT_3D('',#2794,#2795,#2796);
#2798=CYLINDRICAL_SURFACE('',#2797,4.E0);
#2799=ORIENTED_EDGE('',*,*,#2762,.T.);
#2800=ORIENTED_EDGE('',*,*,#2789,.F.);
#2802=ORIENTED_EDGE('',*,*,#2801,.T.);
#2804=ORIENTED_EDGE('',*,*,#2803,.F.);
#2806=ORIENTED_EDGE('',*,*,#2805,.T.);
#2808=ORIENTED_EDGE('',*,*,#2807,.F.);
#2810=ORIENTED_EDGE('',*,*,#2809,.T.);
#2811=ORIENTED_EDGE('',*,*,#2777,.T.);
#2812=EDGE_LOOP('',(#2799,#2800,#2802,#2804,#2806,#2808,#2810,#2811));
#2813=FACE_OUTER_BOUND('',#2812,.F.);
#2814=ADVANCED_FACE('',(#2813),#2798,.T.);
#2815=CARTESIAN_POINT('',(2.230619610031E2,1.717670137561E2,7.22E1));
#2816=DIRECTION('',(-1.E0,0.E0,0.E0));
#2817=DIRECTION('',(0.E0,5.E-1,8.660254037844E-1));
#2818=AXIS2_PLACEMENT_3D('',#2815,#2816,#2817);
#2819=PLANE('',#2818);
#2820=ORIENTED_EDGE('',*,*,#2787,.F.);
#2822=ORIENTED_EDGE('',*,*,#2821,.T.);
#2823=ORIENTED_EDGE('',*,*,#2801,.F.);
#2824=EDGE_LOOP('',(#2820,#2822,#2823));
#2825=FACE_OUTER_BOUND('',#2824,.F.);
#2826=ADVANCED_FACE('',(#2825),#2819,.T.);
#2827=CARTESIAN_POINT('',(2.245220252917E2,1.720500089001E2,6.603384918383E1));
#2828=DIRECTION('',(0.E0,8.660254037844E-1,-5.E-1));
#2829=DIRECTION('',(0.E0,-5.E-1,-8.660254037844E-1));
#2830=AXIS2_PLACEMENT_3D('',#2827,#2828,#2829);
#2831=PLANE('',#2830);
#2832=ORIENTED_EDGE('',*,*,#2785,.T.);
#2834=ORIENTED_EDGE('',*,*,#2833,.F.);
#2835=ORIENTED_EDGE('',*,*,#2803,.T.);
#2836=ORIENTED_EDGE('',*,*,#2821,.F.);
#2837=EDGE_LOOP('',(#2832,#2834,#2835,#2836));
#2838=FACE_OUTER_BOUND('',#2837,.F.);
#2839=ADVANCED_FACE('',(#2838),#2831,.T.);
#2840=CARTESIAN_POINT('',(2.245220252917E2,1.752311153712E2,7.02E1));
#2841=DIRECTION('',(1.E0,0.E0,0.E0));
#2842=DIRECTION('',(0.E0,-5.E-1,-8.660254037844E-1));
#2843=AXIS2_PLACEMENT_3D('',#2840,#2841,#2842);
#2844=PLANE('',#2843);
#2845=ORIENTED_EDGE('',*,*,#2783,.F.);
#2847=ORIENTED_EDGE('',*,*,#2846,.F.);
#2848=ORIENTED_EDGE('',*,*,#2805,.F.);
#2849=ORIENTED_EDGE('',*,*,#2833,.T.);
#2850=EDGE_LOOP('',(#2845,#2847,#2848,#2849));
#2851=FACE_OUTER_BOUND('',#2850,.F.);
#2852=ADVANCED_FACE('',(#2851),#2844,.F.);
#2853=CARTESIAN_POINT('',(2.245220252917E2,1.784122218423E2,7.436615081617E1));
#2854=DIRECTION('',(0.E0,-8.660254037844E-1,5.E-1));
#2855=DIRECTION('',(0.E0,5.E-1,8.660254037844E-1));
#2856=AXIS2_PLACEMENT_3D('',#2853,#2854,#2855);
#2857=PLANE('',#2856);
#2858=ORIENTED_EDGE('',*,*,#2781,.T.);
#2860=ORIENTED_EDGE('',*,*,#2859,.F.);
#2861=ORIENTED_EDGE('',*,*,#2807,.T.);
#2862=ORIENTED_EDGE('',*,*,#2846,.T.);
#2863=EDGE_LOOP('',(#2858,#2860,#2861,#2862));
#2864=FACE_OUTER_BOUND('',#2863,.F.);
#2865=ADVANCED_FACE('',(#2864),#2857,.T.);
#2866=CARTESIAN_POINT('',(2.230619610031E2,1.717670137561E2,7.22E1));
#2867=DIRECTION('',(-1.E0,0.E0,0.E0));
#2868=DIRECTION('',(0.E0,5.E-1,8.660254037844E-1));
#2869=AXIS2_PLACEMENT_3D('',#2866,#2867,#2868);
#2870=PLANE('',#2869);
#2871=ORIENTED_EDGE('',*,*,#2859,.T.);
#2872=ORIENTED_EDGE('',*,*,#2779,.F.);
#2873=ORIENTED_EDGE('',*,*,#2809,.F.);
#2874=EDGE_LOOP('',(#2871,#2872,#2873));
#2875=FACE_OUTER_BOUND('',#2874,.F.);
#2876=ADVANCED_FACE('',(#2875),#2870,.T.);
#2877=CLOSED_SHELL('',(#2730,#2741,#2754,#2770,#2793,#2814,#2826,#2839,#2852,
#2865,#2876));
#2878=MANIFOLD_SOLID_BREP('',#2877);
#2880=DIMENSIONAL_EXPONENTS(0.E0,0.E0,0.E0,0.E0,0.E0,0.E0,0.E0);
#2882=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(1.745329251994E-2),
#2881);
#2883=(CONVERSION_BASED_UNIT('DEGREE',#2882)NAMED_UNIT(*)PLANE_ANGLE_UNIT());
#2885=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(2.019931699834E-3),#2879,
'closure',
'Maximum model space distance between geometric entities at asserted connectivities');
#2886=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((
#2885))GLOBAL_UNIT_ASSIGNED_CONTEXT((#2879,#2883,#2884))REPRESENTATION_CONTEXT(
'ID5','3'));
#2887=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#2888=DIRECTION('',(0.E0,0.E0,1.E0));
#2889=DIRECTION('',(1.E0,0.E0,0.E0));
#2892=DESIGN_CONTEXT('',#863,'design');
#2893=MECHANICAL_CONTEXT('',#863,'mechanical');
#2894=PRODUCT('LAD4-3DSOLID_5968','LAD4-3DSOLID_5968','NOT SPECIFIED',(#2893));
#2895=PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE('1','LAST_VERSION',
#2894,.MADE.);
#2901=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#2902=DIRECTION('',(0.E0,0.E0,1.E0));
#2903=DIRECTION('',(1.E0,0.E0,0.E0));
#2904=AXIS2_PLACEMENT_3D('',#2901,#2902,#2903);
#2905=ITEM_DEFINED_TRANSFORMATION('','',#2890,#2904);
#2906=(REPRESENTATION_RELATIONSHIP('','',#2891,#874)REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#2905)SHAPE_REPRESENTATION_RELATIONSHIP());
#2907=CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#2906,#2900);
#2908=CARTESIAN_POINT('',(2.360619610031E2,1.752311153712E2,4.68E1));
#2909=DIRECTION('',(1.E0,0.E0,0.E0));
#2910=DIRECTION('',(0.E0,-8.660254037844E-1,5.E-1));
#2911=AXIS2_PLACEMENT_3D('',#2908,#2909,#2910);
#2913=CARTESIAN_POINT('',(2.360619610031E2,1.752311153712E2,4.68E1));
#2914=DIRECTION('',(1.E0,0.E0,0.E0));
#2915=DIRECTION('',(0.E0,8.660254037844E-1,-5.E-1));
#2916=AXIS2_PLACEMENT_3D('',#2913,#2914,#2915);
#2918=DIRECTION('',(-1.E0,0.E0,0.E0));
#2919=VECTOR('',#2918,1.E1);
#2920=CARTESIAN_POINT('',(2.360619610031E2,1.773961788807E2,4.555E1));
#2921=LINE('',#2920,#2919);
#2922=DIRECTION('',(-1.E0,0.E0,0.E0));
#2923=VECTOR('',#2922,1.E1);
#2924=CARTESIAN_POINT('',(2.360619610031E2,1.730660518617E2,4.805E1));
#2925=LINE('',#2924,#2923);
#2926=CARTESIAN_POINT('',(2.260619610031E2,1.752311153712E2,4.68E1));
#2927=DIRECTION('',(-1.E0,0.E0,0.E0));
#2928=DIRECTION('',(0.E0,-8.660254037844E-1,5.E-1));
#2929=AXIS2_PLACEMENT_3D('',#2926,#2927,#2928);
#2931=CARTESIAN_POINT('',(2.260619610031E2,1.752311153712E2,4.68E1));
#2932=DIRECTION('',(-1.E0,0.E0,0.E0));
#2933=DIRECTION('',(0.E0,8.660254037844E-1,-5.E-1));
#2934=AXIS2_PLACEMENT_3D('',#2931,#2932,#2933);
#2936=CARTESIAN_POINT('',(2.260619610031E2,1.752311153712E2,4.68E1));
#2937=DIRECTION('',(1.E0,0.E0,0.E0));
#2938=DIRECTION('',(0.E0,-8.660254037844E-1,5.E-1));
#2939=AXIS2_PLACEMENT_3D('',#2936,#2937,#2938);
#2941=CARTESIAN_POINT('',(2.260619610031E2,1.752311153712E2,4.68E1));
#2942=DIRECTION('',(1.E0,0.E0,0.E0));
#2943=DIRECTION('',(0.E0,8.660254037844E-1,-5.E-1));
#2944=AXIS2_PLACEMENT_3D('',#2941,#2942,#2943);
#2946=DIRECTION('',(-1.E0,1.946606711299E-14,0.E0));
#2947=VECTOR('',#2946,1.460064288561E0);
#2948=CARTESIAN_POINT('',(2.245220252917E2,1.738413616879E2,4.304918879445E1));
#2949=LINE('',#2948,#2947);
#2950=DIRECTION('',(1.E0,0.E0,0.E0));
#2951=VECTOR('',#2950,1.460064288561E0);
#2952=CARTESIAN_POINT('',(2.230619610031E2,1.726776944241E2,4.372103240246E1));
#2953=LINE('',#2952,#2951);
#2954=DIRECTION('',(9.999999999893E-1,-3.998344700027E-6,2.308697579161E-6));
#2955=VECTOR('',#2954,3.000000000032E0);
#2956=CARTESIAN_POINT('',(2.230619610031E2,1.717670257511E2,4.879999307391E1));
#2957=LINE('',#2956,#2955);
#2958=DIRECTION('',(-1.E0,0.E0,0.E0));
#2959=VECTOR('',#2958,1.460064288561E0);
#2960=CARTESIAN_POINT('',(2.245220252917E2,1.766208690545E2,5.055081120555E1));
#2961=LINE('',#2960,#2959);
#2962=DIRECTION('',(1.E0,0.E0,0.E0));
#2963=VECTOR('',#2962,1.460064288561E0);
#2964=CARTESIAN_POINT('',(2.230619610031E2,1.777845363183E2,4.987896759754E1));
#2965=LINE('',#2964,#2963);
#2966=DIRECTION('',(1.E0,0.E0,0.E0));
#2967=VECTOR('',#2966,3.E0);
#2968=CARTESIAN_POINT('',(2.230619610031E2,1.786952169863E2,4.48E1));
#2969=LINE('',#2968,#2967);
#2970=CARTESIAN_POINT('',(2.230619610031E2,1.752311153712E2,4.68E1));
#2971=DIRECTION('',(-1.E0,0.E0,0.E0));
#2972=DIRECTION('',(0.E0,-6.383552367853E-1,-7.697418993849E-1));
#2973=AXIS2_PLACEMENT_3D('',#2970,#2971,#2972);
#2975=CARTESIAN_POINT('',(2.230619610031E2,1.752311153712E2,4.68E1));
#2976=DIRECTION('',(-1.E0,0.E0,0.E0));
#2977=DIRECTION('',(0.E0,-8.660254040301E-1,4.999999995744E-1));
#2978=AXIS2_PLACEMENT_3D('',#2975,#2976,#2977);
#2980=DIRECTION('',(0.E0,-5.E-1,-8.660254037844E-1));
#2981=VECTOR('',#2980,7.886349260938E0);
#2982=CARTESIAN_POINT('',(2.245220252917E2,1.766208690545E2,5.055081120555E1));
#2983=LINE('',#2982,#2981);
#2984=DIRECTION('',(0.E0,5.E-1,8.660254037844E-1));
#2985=VECTOR('',#2984,7.886349260939E0);
#2986=CARTESIAN_POINT('',(2.230619610031E2,1.726776944241E2,4.372103240246E1));
#2987=LINE('',#2986,#2985);
#2988=CARTESIAN_POINT('',(2.245220252917E2,1.752311153712E2,4.68E1));
#2989=DIRECTION('',(-1.E0,0.E0,0.E0));
#2990=DIRECTION('',(0.E0,-3.474384208320E-1,-9.377028013874E-1));
#2991=AXIS2_PLACEMENT_3D('',#2988,#2989,#2990);
#2993=DIRECTION('',(0.E0,-5.E-1,-8.660254037844E-1));
#2994=VECTOR('',#2993,7.886349260938E0);
#2995=CARTESIAN_POINT('',(2.245220252917E2,1.777845363183E2,4.987896759754E1));
#2996=LINE('',#2995,#2994);
#2997=CARTESIAN_POINT('',(2.245220252917E2,1.752311153712E2,4.68E1));
#2998=DIRECTION('',(-1.E0,0.E0,0.E0));
#2999=DIRECTION('',(0.E0,3.474384208320E-1,9.377028013874E-1));
#3000=AXIS2_PLACEMENT_3D('',#2997,#2998,#2999);
#3002=DIRECTION('',(0.E0,-5.E-1,-8.660254037844E-1));
#3003=VECTOR('',#3002,7.886349260938E0);
#3004=CARTESIAN_POINT('',(2.230619610031E2,1.777845363183E2,4.987896759754E1));
#3005=LINE('',#3004,#3003);
#3006=CARTESIAN_POINT('',(2.230619610031E2,1.752311153712E2,4.68E1));
#3007=DIRECTION('',(-1.E0,0.E0,0.E0));
#3008=DIRECTION('',(0.E0,8.660254037844E-1,-5.E-1));
#3009=AXIS2_PLACEMENT_3D('',#3006,#3007,#3008);
#3011=CARTESIAN_POINT('',(2.230619610031E2,1.752311153712E2,4.68E1));
#3012=DIRECTION('',(-1.E0,0.E0,0.E0));
#3013=DIRECTION('',(0.E0,6.383552367854E-1,7.697418993849E-1));
#3014=AXIS2_PLACEMENT_3D('',#3011,#3012,#3013);
#3016=CARTESIAN_POINT('',(2.230619610031E2,1.726776944241E2,4.372103240246E1));
#3017=CARTESIAN_POINT('',(2.230619610031E2,1.766208690545E2,5.055081120555E1));
#3018=VERTEX_POINT('',#3016);
#3019=VERTEX_POINT('',#3017);
#3020=CARTESIAN_POINT('',(2.245220252917E2,1.766208690545E2,5.055081120555E1));
#3021=CARTESIAN_POINT('',(2.245220252917E2,1.726776944241E2,4.372103240246E1));
#3022=VERTEX_POINT('',#3020);
#3023=VERTEX_POINT('',#3021);
#3024=CARTESIAN_POINT('',(2.245220252917E2,1.777845363183E2,4.987896759754E1));
#3025=CARTESIAN_POINT('',(2.245220252917E2,1.738413616879E2,4.304918879445E1));
#3026=VERTEX_POINT('',#3024);
#3027=VERTEX_POINT('',#3025);
#3028=CARTESIAN_POINT('',(2.230619610031E2,1.777845363183E2,4.987896759754E1));
#3029=CARTESIAN_POINT('',(2.230619610031E2,1.738413616879E2,4.304918879445E1));
#3030=VERTEX_POINT('',#3028);
#3031=VERTEX_POINT('',#3029);
#3032=CARTESIAN_POINT('',(2.360619610031E2,1.773961788807E2,4.555E1));
#3033=CARTESIAN_POINT('',(2.260619610031E2,1.773961788807E2,4.555E1));
#3034=VERTEX_POINT('',#3032);
#3035=VERTEX_POINT('',#3033);
#3036=CARTESIAN_POINT('',(2.360619610031E2,1.730660518617E2,4.805E1));
#3037=CARTESIAN_POINT('',(2.260619610031E2,1.730660518617E2,4.805E1));
#3038=VERTEX_POINT('',#3036);
#3039=VERTEX_POINT('',#3037);
#3040=CARTESIAN_POINT('',(2.230619610031E2,1.717670257511E2,4.879999307391E1));
#3041=CARTESIAN_POINT('',(2.260619610031E2,1.717670137561E2,4.88E1));
#3042=VERTEX_POINT('',#3040);
#3043=VERTEX_POINT('',#3041);
#3044=CARTESIAN_POINT('',(2.230619610031E2,1.786952169863E2,4.48E1));
#3045=CARTESIAN_POINT('',(2.260619610031E2,1.786952169863E2,4.48E1));
#3046=VERTEX_POINT('',#3044);
#3047=VERTEX_POINT('',#3045);
#3048=CARTESIAN_POINT('',(2.260619610031E2,1.752311153712E2,4.68E1));
#3049=DIRECTION('',(-1.E0,0.E0,0.E0));
#3050=DIRECTION('',(0.E0,-8.660254037844E-1,5.E-1));
#3051=AXIS2_PLACEMENT_3D('',#3048,#3049,#3050);
#3052=CYLINDRICAL_SURFACE('',#3051,2.5E0);
#3054=ORIENTED_EDGE('',*,*,#3053,.T.);
#3056=ORIENTED_EDGE('',*,*,#3055,.T.);
#3058=ORIENTED_EDGE('',*,*,#3057,.T.);
#3060=ORIENTED_EDGE('',*,*,#3059,.F.);
#3061=EDGE_LOOP('',(#3054,#3056,#3058,#3060));
#3062=FACE_OUTER_BOUND('',#3061,.F.);
#3063=ADVANCED_FACE('',(#3062),#3052,.T.);
#3064=CARTESIAN_POINT('',(2.360619610031E2,1.730660518617E2,4.805E1));
#3065=DIRECTION('',(-1.E0,0.E0,0.E0));
#3066=DIRECTION('',(0.E0,5.E-1,8.660254037844E-1));
#3067=AXIS2_PLACEMENT_3D('',#3064,#3065,#3066);
#3068=PLANE('',#3067);
#3070=ORIENTED_EDGE('',*,*,#3069,.F.);
#3071=ORIENTED_EDGE('',*,*,#3053,.F.);
#3072=EDGE_LOOP('',(#3070,#3071));
#3073=FACE_OUTER_BOUND('',#3072,.F.);
#3074=ADVANCED_FACE('',(#3073),#3068,.F.);
#3075=CARTESIAN_POINT('',(2.260619610031E2,1.752311153712E2,4.68E1));
#3076=DIRECTION('',(-1.E0,0.E0,0.E0));
#3077=DIRECTION('',(0.E0,-8.660254037844E-1,5.E-1));
#3078=AXIS2_PLACEMENT_3D('',#3075,#3076,#3077);
#3079=CYLINDRICAL_SURFACE('',#3078,2.5E0);
#3080=ORIENTED_EDGE('',*,*,#3069,.T.);
#3081=ORIENTED_EDGE('',*,*,#3059,.T.);
#3083=ORIENTED_EDGE('',*,*,#3082,.T.);
#3084=ORIENTED_EDGE('',*,*,#3055,.F.);
#3085=EDGE_LOOP('',(#3080,#3081,#3083,#3084));
#3086=FACE_OUTER_BOUND('',#3085,.F.);
#3087=ADVANCED_FACE('',(#3086),#3079,.T.);
#3088=CARTESIAN_POINT('',(2.260619610031E2,1.752311153712E2,4.68E1));
#3089=DIRECTION('',(-1.E0,0.E0,0.E0));
#3090=DIRECTION('',(0.E0,5.E-1,8.660254037844E-1));
#3091=AXIS2_PLACEMENT_3D('',#3088,#3089,#3090);
#3092=PLANE('',#3091);
#3094=ORIENTED_EDGE('',*,*,#3093,.F.);
#3096=ORIENTED_EDGE('',*,*,#3095,.F.);
#3097=EDGE_LOOP('',(#3094,#3096));
#3098=FACE_OUTER_BOUND('',#3097,.F.);
#3099=ORIENTED_EDGE('',*,*,#3057,.F.);
#3100=ORIENTED_EDGE('',*,*,#3082,.F.);
#3101=EDGE_LOOP('',(#3099,#3100));
#3102=FACE_BOUND('',#3101,.F.);
#3103=ADVANCED_FACE('',(#3098,#3102),#3092,.F.);
#3104=CARTESIAN_POINT('',(2.260619610031E2,1.752311153712E2,4.68E1));
#3105=DIRECTION('',(1.E0,0.E0,0.E0));
#3106=DIRECTION('',(0.E0,-8.660254037844E-1,5.E-1));
#3107=AXIS2_PLACEMENT_3D('',#3104,#3105,#3106);
#3108=CYLINDRICAL_SURFACE('',#3107,4.E0);
#3109=ORIENTED_EDGE('',*,*,#3093,.T.);
#3111=ORIENTED_EDGE('',*,*,#3110,.F.);
#3113=ORIENTED_EDGE('',*,*,#3112,.T.);
#3115=ORIENTED_EDGE('',*,*,#3114,.F.);
#3117=ORIENTED_EDGE('',*,*,#3116,.T.);
#3119=ORIENTED_EDGE('',*,*,#3118,.F.);
#3121=ORIENTED_EDGE('',*,*,#3120,.T.);
#3123=ORIENTED_EDGE('',*,*,#3122,.T.);
#3124=EDGE_LOOP('',(#3109,#3111,#3113,#3115,#3117,#3119,#3121,#3123));
#3125=FACE_OUTER_BOUND('',#3124,.F.);
#3126=ADVANCED_FACE('',(#3125),#3108,.T.);
#3127=CARTESIAN_POINT('',(2.260619610031E2,1.752311153712E2,4.68E1));
#3128=DIRECTION('',(1.E0,0.E0,0.E0));
#3129=DIRECTION('',(0.E0,-8.660254037844E-1,5.E-1));
#3130=AXIS2_PLACEMENT_3D('',#3127,#3128,#3129);
#3131=CYLINDRICAL_SURFACE('',#3130,4.E0);
#3132=ORIENTED_EDGE('',*,*,#3095,.T.);
#3133=ORIENTED_EDGE('',*,*,#3122,.F.);
#3135=ORIENTED_EDGE('',*,*,#3134,.T.);
#3137=ORIENTED_EDGE('',*,*,#3136,.F.);
#3139=ORIENTED_EDGE('',*,*,#3138,.T.);
#3141=ORIENTED_EDGE('',*,*,#3140,.F.);
#3143=ORIENTED_EDGE('',*,*,#3142,.T.);
#3144=ORIENTED_EDGE('',*,*,#3110,.T.);
#3145=EDGE_LOOP('',(#3132,#3133,#3135,#3137,#3139,#3141,#3143,#3144));
#3146=FACE_OUTER_BOUND('',#3145,.F.);
#3147=ADVANCED_FACE('',(#3146),#3131,.T.);
#3148=CARTESIAN_POINT('',(2.230619610031E2,1.717670137561E2,4.88E1));
#3149=DIRECTION('',(-1.E0,0.E0,0.E0));
#3150=DIRECTION('',(0.E0,5.E-1,8.660254037844E-1));
#3151=AXIS2_PLACEMENT_3D('',#3148,#3149,#3150);
#3152=PLANE('',#3151);
#3153=ORIENTED_EDGE('',*,*,#3120,.F.);
#3155=ORIENTED_EDGE('',*,*,#3154,.T.);
#3156=ORIENTED_EDGE('',*,*,#3134,.F.);
#3157=EDGE_LOOP('',(#3153,#3155,#3156));
#3158=FACE_OUTER_BOUND('',#3157,.F.);
#3159=ADVANCED_FACE('',(#3158),#3152,.T.);
#3160=CARTESIAN_POINT('',(2.245220252917E2,1.720500089001E2,4.263384918383E1));
#3161=DIRECTION('',(0.E0,8.660254037844E-1,-5.E-1));
#3162=DIRECTION('',(0.E0,-5.E-1,-8.660254037844E-1));
#3163=AXIS2_PLACEMENT_3D('',#3160,#3161,#3162);
#3164=PLANE('',#3163);
#3165=ORIENTED_EDGE('',*,*,#3118,.T.);
#3167=ORIENTED_EDGE('',*,*,#3166,.F.);
#3168=ORIENTED_EDGE('',*,*,#3136,.T.);
#3169=ORIENTED_EDGE('',*,*,#3154,.F.);
#3170=EDGE_LOOP('',(#3165,#3167,#3168,#3169));
#3171=FACE_OUTER_BOUND('',#3170,.F.);
#3172=ADVANCED_FACE('',(#3171),#3164,.T.);
#3173=CARTESIAN_POINT('',(2.245220252917E2,1.752311153712E2,4.68E1));
#3174=DIRECTION('',(1.E0,0.E0,0.E0));
#3175=DIRECTION('',(0.E0,-5.E-1,-8.660254037844E-1));
#3176=AXIS2_PLACEMENT_3D('',#3173,#3174,#3175);
#3177=PLANE('',#3176);
#3178=ORIENTED_EDGE('',*,*,#3116,.F.);
#3180=ORIENTED_EDGE('',*,*,#3179,.F.);
#3181=ORIENTED_EDGE('',*,*,#3138,.F.);
#3182=ORIENTED_EDGE('',*,*,#3166,.T.);
#3183=EDGE_LOOP('',(#3178,#3180,#3181,#3182));
#3184=FACE_OUTER_BOUND('',#3183,.F.);
#3185=ADVANCED_FACE('',(#3184),#3177,.F.);
#3186=CARTESIAN_POINT('',(2.245220252917E2,1.784122218423E2,5.096615081617E1));
#3187=DIRECTION('',(0.E0,-8.660254037844E-1,5.E-1));
#3188=DIRECTION('',(0.E0,5.E-1,8.660254037844E-1));
#3189=AXIS2_PLACEMENT_3D('',#3186,#3187,#3188);
#3190=PLANE('',#3189);
#3191=ORIENTED_EDGE('',*,*,#3114,.T.);
#3193=ORIENTED_EDGE('',*,*,#3192,.F.);
#3194=ORIENTED_EDGE('',*,*,#3140,.T.);
#3195=ORIENTED_EDGE('',*,*,#3179,.T.);
#3196=EDGE_LOOP('',(#3191,#3193,#3194,#3195));
#3197=FACE_OUTER_BOUND('',#3196,.F.);
#3198=ADVANCED_FACE('',(#3197),#3190,.T.);
#3199=CARTESIAN_POINT('',(2.230619610031E2,1.717670137561E2,4.88E1));
#3200=DIRECTION('',(-1.E0,0.E0,0.E0));
#3201=DIRECTION('',(0.E0,5.E-1,8.660254037844E-1));
#3202=AXIS2_PLACEMENT_3D('',#3199,#3200,#3201);
#3203=PLANE('',#3202);
#3204=ORIENTED_EDGE('',*,*,#3192,.T.);
#3205=ORIENTED_EDGE('',*,*,#3112,.F.);
#3206=ORIENTED_EDGE('',*,*,#3142,.F.);
#3207=EDGE_LOOP('',(#3204,#3205,#3206));
#3208=FACE_OUTER_BOUND('',#3207,.F.);
#3209=ADVANCED_FACE('',(#3208),#3203,.T.);
#3210=CLOSED_SHELL('',(#3063,#3074,#3087,#3103,#3126,#3147,#3159,#3172,#3185,
#3198,#3209));
#3211=MANIFOLD_SOLID_BREP('',#3210);
#3213=DIMENSIONAL_EXPONENTS(0.E0,0.E0,0.E0,0.E0,0.E0,0.E0,0.E0);
#3215=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(1.745329251994E-2),
#3214);
#3216=(CONVERSION_BASED_UNIT('DEGREE',#3215)NAMED_UNIT(*)PLANE_ANGLE_UNIT());
#3218=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(2.019931699834E-3),#3212,
'closure',
'Maximum model space distance between geometric entities at asserted connectivities');
#3219=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((
#3218))GLOBAL_UNIT_ASSIGNED_CONTEXT((#3212,#3216,#3217))REPRESENTATION_CONTEXT(
'ID6','3'));
#3220=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#3221=DIRECTION('',(0.E0,0.E0,1.E0));
#3222=DIRECTION('',(1.E0,0.E0,0.E0));
#3225=MECHANICAL_CONTEXT('',#863,'mechanical');
#3226=PRODUCT('LAD4-3DSOLID_5969','LAD4-3DSOLID_5969','NOT SPECIFIED',(#3225));
#3227=PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE('1','LAST_VERSION',
#3226,.MADE.);
#3233=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#3234=DIRECTION('',(0.E0,0.E0,1.E0));
#3235=DIRECTION('',(1.E0,0.E0,0.E0));
#3236=AXIS2_PLACEMENT_3D('',#3233,#3234,#3235);
#3237=ITEM_DEFINED_TRANSFORMATION('','',#3223,#3236);
#3238=(REPRESENTATION_RELATIONSHIP('','',#3224,#874)REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#3237)SHAPE_REPRESENTATION_RELATIONSHIP());
#3239=CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#3238,#3232);
#3240=CARTESIAN_POINT('',(2.360619610031E2,1.752311153712E2,2.34E1));
#3241=DIRECTION('',(1.E0,0.E0,0.E0));
#3242=DIRECTION('',(0.E0,-8.660254037844E-1,5.E-1));
#3243=AXIS2_PLACEMENT_3D('',#3240,#3241,#3242);
#3245=CARTESIAN_POINT('',(2.360619610031E2,1.752311153712E2,2.34E1));
#3246=DIRECTION('',(1.E0,0.E0,0.E0));
#3247=DIRECTION('',(0.E0,8.660254037844E-1,-5.E-1));
#3248=AXIS2_PLACEMENT_3D('',#3245,#3246,#3247);
#3250=DIRECTION('',(-1.E0,0.E0,0.E0));
#3251=VECTOR('',#3250,1.E1);
#3252=CARTESIAN_POINT('',(2.360619610031E2,1.773961788807E2,2.215E1));
#3253=LINE('',#3252,#3251);
#3254=DIRECTION('',(-1.E0,0.E0,0.E0));
#3255=VECTOR('',#3254,1.E1);
#3256=CARTESIAN_POINT('',(2.360619610031E2,1.730660518617E2,2.465E1));
#3257=LINE('',#3256,#3255);
#3258=CARTESIAN_POINT('',(2.260619610031E2,1.752311153712E2,2.34E1));
#3259=DIRECTION('',(-1.E0,0.E0,0.E0));
#3260=DIRECTION('',(0.E0,-8.660254037844E-1,5.E-1));
#3261=AXIS2_PLACEMENT_3D('',#3258,#3259,#3260);
#3263=CARTESIAN_POINT('',(2.260619610031E2,1.752311153712E2,2.34E1));
#3264=DIRECTION('',(-1.E0,0.E0,0.E0));
#3265=DIRECTION('',(0.E0,8.660254037844E-1,-5.E-1));
#3266=AXIS2_PLACEMENT_3D('',#3263,#3264,#3265);
#3268=CARTESIAN_POINT('',(2.260619610031E2,1.752311153712E2,2.34E1));
#3269=DIRECTION('',(1.E0,0.E0,0.E0));
#3270=DIRECTION('',(0.E0,-8.660254037844E-1,5.E-1));
#3271=AXIS2_PLACEMENT_3D('',#3268,#3269,#3270);
#3273=CARTESIAN_POINT('',(2.260619610031E2,1.752311153712E2,2.34E1));
#3274=DIRECTION('',(1.E0,0.E0,0.E0));
#3275=DIRECTION('',(0.E0,8.660254037844E-1,-5.E-1));
#3276=AXIS2_PLACEMENT_3D('',#3273,#3274,#3275);
#3278=DIRECTION('',(-1.E0,0.E0,0.E0));
#3279=VECTOR('',#3278,1.460064288561E0);
#3280=CARTESIAN_POINT('',(2.245220252917E2,1.738413616879E2,1.964918879445E1));
#3281=LINE('',#3280,#3279);
#3282=DIRECTION('',(1.E0,0.E0,0.E0));
#3283=VECTOR('',#3282,1.460064288561E0);
#3284=CARTESIAN_POINT('',(2.230619610031E2,1.726776944241E2,2.032103240246E1));
#3285=LINE('',#3284,#3283);
#3286=DIRECTION('',(9.999999999893E-1,-3.998344700027E-6,2.308697581530E-6));
#3287=VECTOR('',#3286,3.000000000032E0);
#3288=CARTESIAN_POINT('',(2.230619610031E2,1.717670257511E2,2.539999307391E1));
#3289=LINE('',#3288,#3287);
#3290=DIRECTION('',(-1.E0,0.E0,0.E0));
#3291=VECTOR('',#3290,1.460064288561E0);
#3292=CARTESIAN_POINT('',(2.245220252917E2,1.766208690545E2,2.715081120555E1));
#3293=LINE('',#3292,#3291);
#3294=DIRECTION('',(1.E0,0.E0,0.E0));
#3295=VECTOR('',#3294,1.460064288561E0);
#3296=CARTESIAN_POINT('',(2.230619610031E2,1.777845363183E2,2.647896759754E1));
#3297=LINE('',#3296,#3295);
#3298=DIRECTION('',(1.E0,0.E0,0.E0));
#3299=VECTOR('',#3298,3.E0);
#3300=CARTESIAN_POINT('',(2.230619610031E2,1.786952169863E2,2.14E1));
#3301=LINE('',#3300,#3299);
#3302=CARTESIAN_POINT('',(2.230619610031E2,1.752311153712E2,2.34E1));
#3303=DIRECTION('',(-1.E0,0.E0,0.E0));
#3304=DIRECTION('',(0.E0,-6.383552367854E-1,-7.697418993849E-1));
#3305=AXIS2_PLACEMENT_3D('',#3302,#3303,#3304);
#3307=CARTESIAN_POINT('',(2.230619610031E2,1.752311153712E2,2.34E1));
#3308=DIRECTION('',(-1.E0,0.E0,0.E0));
#3309=DIRECTION('',(0.E0,-8.660254040301E-1,4.999999995744E-1));
#3310=AXIS2_PLACEMENT_3D('',#3307,#3308,#3309);
#3312=DIRECTION('',(0.E0,-5.E-1,-8.660254037844E-1));
#3313=VECTOR('',#3312,7.886349260938E0);
#3314=CARTESIAN_POINT('',(2.245220252917E2,1.766208690545E2,2.715081120555E1));
#3315=LINE('',#3314,#3313);
#3316=DIRECTION('',(0.E0,5.E-1,8.660254037844E-1));
#3317=VECTOR('',#3316,7.886349260938E0);
#3318=CARTESIAN_POINT('',(2.230619610031E2,1.726776944241E2,2.032103240246E1));
#3319=LINE('',#3318,#3317);
#3320=CARTESIAN_POINT('',(2.245220252917E2,1.752311153712E2,2.34E1));
#3321=DIRECTION('',(-1.E0,0.E0,0.E0));
#3322=DIRECTION('',(0.E0,-3.474384208320E-1,-9.377028013874E-1));
#3323=AXIS2_PLACEMENT_3D('',#3320,#3321,#3322);
#3325=DIRECTION('',(0.E0,-5.E-1,-8.660254037844E-1));
#3326=VECTOR('',#3325,7.886349260938E0);
#3327=CARTESIAN_POINT('',(2.245220252917E2,1.777845363183E2,2.647896759754E1));
#3328=LINE('',#3327,#3326);
#3329=CARTESIAN_POINT('',(2.245220252917E2,1.752311153712E2,2.34E1));
#3330=DIRECTION('',(-1.E0,0.E0,0.E0));
#3331=DIRECTION('',(0.E0,3.474384208320E-1,9.377028013874E-1));
#3332=AXIS2_PLACEMENT_3D('',#3329,#3330,#3331);
#3334=DIRECTION('',(0.E0,-5.E-1,-8.660254037844E-1));
#3335=VECTOR('',#3334,7.886349260938E0);
#3336=CARTESIAN_POINT('',(2.230619610031E2,1.777845363183E2,2.647896759754E1));
#3337=LINE('',#3336,#3335);
#3338=CARTESIAN_POINT('',(2.230619610031E2,1.752311153712E2,2.34E1));
#3339=DIRECTION('',(-1.E0,0.E0,0.E0));
#3340=DIRECTION('',(0.E0,8.660254037844E-1,-5.E-1));
#3341=AXIS2_PLACEMENT_3D('',#3338,#3339,#3340);
#3343=CARTESIAN_POINT('',(2.230619610031E2,1.752311153712E2,2.34E1));
#3344=DIRECTION('',(-1.E0,0.E0,0.E0));
#3345=DIRECTION('',(0.E0,6.383552367854E-1,7.697418993849E-1));
#3346=AXIS2_PLACEMENT_3D('',#3343,#3344,#3345);
#3348=CARTESIAN_POINT('',(2.230619610031E2,1.726776944241E2,2.032103240246E1));
#3349=CARTESIAN_POINT('',(2.230619610031E2,1.766208690545E2,2.715081120555E1));
#3350=VERTEX_POINT('',#3348);
#3351=VERTEX_POINT('',#3349);
#3352=CARTESIAN_POINT('',(2.245220252917E2,1.766208690545E2,2.715081120555E1));
#3353=CARTESIAN_POINT('',(2.245220252917E2,1.726776944241E2,2.032103240246E1));
#3354=VERTEX_POINT('',#3352);
#3355=VERTEX_POINT('',#3353);
#3356=CARTESIAN_POINT('',(2.245220252917E2,1.777845363183E2,2.647896759754E1));
#3357=CARTESIAN_POINT('',(2.245220252917E2,1.738413616879E2,1.964918879445E1));
#3358=VERTEX_POINT('',#3356);
#3359=VERTEX_POINT('',#3357);
#3360=CARTESIAN_POINT('',(2.230619610031E2,1.777845363183E2,2.647896759754E1));
#3361=CARTESIAN_POINT('',(2.230619610031E2,1.738413616879E2,1.964918879445E1));
#3362=VERTEX_POINT('',#3360);
#3363=VERTEX_POINT('',#3361);
#3364=CARTESIAN_POINT('',(2.360619610031E2,1.773961788807E2,2.215E1));
#3365=CARTESIAN_POINT('',(2.260619610031E2,1.773961788807E2,2.215E1));
#3366=VERTEX_POINT('',#3364);
#3367=VERTEX_POINT('',#3365);
#3368=CARTESIAN_POINT('',(2.360619610031E2,1.730660518617E2,2.465E1));
#3369=CARTESIAN_POINT('',(2.260619610031E2,1.730660518617E2,2.465E1));
#3370=VERTEX_POINT('',#3368);
#3371=VERTEX_POINT('',#3369);
#3372=CARTESIAN_POINT('',(2.230619610031E2,1.717670257511E2,2.539999307391E1));
#3373=CARTESIAN_POINT('',(2.260619610031E2,1.717670137561E2,2.54E1));
#3374=VERTEX_POINT('',#3372);
#3375=VERTEX_POINT('',#3373);
#3376=CARTESIAN_POINT('',(2.230619610031E2,1.786952169863E2,2.14E1));
#3377=CARTESIAN_POINT('',(2.260619610031E2,1.786952169863E2,2.14E1));
#3378=VERTEX_POINT('',#3376);
#3379=VERTEX_POINT('',#3377);
#3380=CARTESIAN_POINT('',(2.260619610031E2,1.752311153712E2,2.34E1));
#3381=DIRECTION('',(-1.E0,0.E0,0.E0));
#3382=DIRECTION('',(0.E0,-8.660254037844E-1,5.E-1));
#3383=AXIS2_PLACEMENT_3D('',#3380,#3381,#3382);
#3384=CYLINDRICAL_SURFACE('',#3383,2.5E0);
#3386=ORIENTED_EDGE('',*,*,#3385,.T.);
#3388=ORIENTED_EDGE('',*,*,#3387,.T.);
#3390=ORIENTED_EDGE('',*,*,#3389,.T.);
#3392=ORIENTED_EDGE('',*,*,#3391,.F.);
#3393=EDGE_LOOP('',(#3386,#3388,#3390,#3392));
#3394=FACE_OUTER_BOUND('',#3393,.F.);
#3395=ADVANCED_FACE('',(#3394),#3384,.T.);
#3396=CARTESIAN_POINT('',(2.360619610031E2,1.730660518617E2,2.465E1));
#3397=DIRECTION('',(-1.E0,0.E0,0.E0));
#3398=DIRECTION('',(0.E0,5.E-1,8.660254037844E-1));
#3399=AXIS2_PLACEMENT_3D('',#3396,#3397,#3398);
#3400=PLANE('',#3399);
#3402=ORIENTED_EDGE('',*,*,#3401,.F.);
#3403=ORIENTED_EDGE('',*,*,#3385,.F.);
#3404=EDGE_LOOP('',(#3402,#3403));
#3405=FACE_OUTER_BOUND('',#3404,.F.);
#3406=ADVANCED_FACE('',(#3405),#3400,.F.);
#3407=CARTESIAN_POINT('',(2.260619610031E2,1.752311153712E2,2.34E1));
#3408=DIRECTION('',(-1.E0,0.E0,0.E0));
#3409=DIRECTION('',(0.E0,-8.660254037844E-1,5.E-1));
#3410=AXIS2_PLACEMENT_3D('',#3407,#3408,#3409);
#3411=CYLINDRICAL_SURFACE('',#3410,2.5E0);
#3412=ORIENTED_EDGE('',*,*,#3401,.T.);
#3413=ORIENTED_EDGE('',*,*,#3391,.T.);
#3415=ORIENTED_EDGE('',*,*,#3414,.T.);
#3416=ORIENTED_EDGE('',*,*,#3387,.F.);
#3417=EDGE_LOOP('',(#3412,#3413,#3415,#3416));
#3418=FACE_OUTER_BOUND('',#3417,.F.);
#3419=ADVANCED_FACE('',(#3418),#3411,.T.);
#3420=CARTESIAN_POINT('',(2.260619610031E2,1.752311153712E2,2.34E1));
#3421=DIRECTION('',(-1.E0,0.E0,0.E0));
#3422=DIRECTION('',(0.E0,5.E-1,8.660254037844E-1));
#3423=AXIS2_PLACEMENT_3D('',#3420,#3421,#3422);
#3424=PLANE('',#3423);
#3426=ORIENTED_EDGE('',*,*,#3425,.F.);
#3428=ORIENTED_EDGE('',*,*,#3427,.F.);
#3429=EDGE_LOOP('',(#3426,#3428));
#3430=FACE_OUTER_BOUND('',#3429,.F.);
#3431=ORIENTED_EDGE('',*,*,#3389,.F.);
#3432=ORIENTED_EDGE('',*,*,#3414,.F.);
#3433=EDGE_LOOP('',(#3431,#3432));
#3434=FACE_BOUND('',#3433,.F.);
#3435=ADVANCED_FACE('',(#3430,#3434),#3424,.F.);
#3436=CARTESIAN_POINT('',(2.260619610031E2,1.752311153712E2,2.34E1));
#3437=DIRECTION('',(1.E0,0.E0,0.E0));
#3438=DIRECTION('',(0.E0,-8.660254037844E-1,5.E-1));
#3439=AXIS2_PLACEMENT_3D('',#3436,#3437,#3438);
#3440=CYLINDRICAL_SURFACE('',#3439,4.E0);
#3441=ORIENTED_EDGE('',*,*,#3425,.T.);
#3443=ORIENTED_EDGE('',*,*,#3442,.F.);
#3445=ORIENTED_EDGE('',*,*,#3444,.T.);
#3447=ORIENTED_EDGE('',*,*,#3446,.F.);
#3449=ORIENTED_EDGE('',*,*,#3448,.T.);
#3451=ORIENTED_EDGE('',*,*,#3450,.F.);
#3453=ORIENTED_EDGE('',*,*,#3452,.T.);
#3455=ORIENTED_EDGE('',*,*,#3454,.T.);
#3456=EDGE_LOOP('',(#3441,#3443,#3445,#3447,#3449,#3451,#3453,#3455));
#3457=FACE_OUTER_BOUND('',#3456,.F.);
#3458=ADVANCED_FACE('',(#3457),#3440,.T.);
#3459=CARTESIAN_POINT('',(2.260619610031E2,1.752311153712E2,2.34E1));
#3460=DIRECTION('',(1.E0,0.E0,0.E0));
#3461=DIRECTION('',(0.E0,-8.660254037844E-1,5.E-1));
#3462=AXIS2_PLACEMENT_3D('',#3459,#3460,#3461);
#3463=CYLINDRICAL_SURFACE('',#3462,4.E0);
#3464=ORIENTED_EDGE('',*,*,#3427,.T.);
#3465=ORIENTED_EDGE('',*,*,#3454,.F.);
#3467=ORIENTED_EDGE('',*,*,#3466,.T.);
#3469=ORIENTED_EDGE('',*,*,#3468,.F.);
#3471=ORIENTED_EDGE('',*,*,#3470,.T.);
#3473=ORIENTED_EDGE('',*,*,#3472,.F.);
#3475=ORIENTED_EDGE('',*,*,#3474,.T.);
#3476=ORIENTED_EDGE('',*,*,#3442,.T.);
#3477=EDGE_LOOP('',(#3464,#3465,#3467,#3469,#3471,#3473,#3475,#3476));
#3478=FACE_OUTER_BOUND('',#3477,.F.);
#3479=ADVANCED_FACE('',(#3478),#3463,.T.);
#3480=CARTESIAN_POINT('',(2.230619610031E2,1.717670137561E2,2.54E1));
#3481=DIRECTION('',(-1.E0,0.E0,0.E0));
#3482=DIRECTION('',(0.E0,5.E-1,8.660254037844E-1));
#3483=AXIS2_PLACEMENT_3D('',#3480,#3481,#3482);
#3484=PLANE('',#3483);
#3485=ORIENTED_EDGE('',*,*,#3452,.F.);
#3487=ORIENTED_EDGE('',*,*,#3486,.T.);
#3488=ORIENTED_EDGE('',*,*,#3466,.F.);
#3489=EDGE_LOOP('',(#3485,#3487,#3488));
#3490=FACE_OUTER_BOUND('',#3489,.F.);
#3491=ADVANCED_FACE('',(#3490),#3484,.T.);
#3492=CARTESIAN_POINT('',(2.245220252917E2,1.720500089001E2,1.923384918383E1));
#3493=DIRECTION('',(0.E0,8.660254037844E-1,-5.E-1));
#3494=DIRECTION('',(0.E0,-5.E-1,-8.660254037844E-1));
#3495=AXIS2_PLACEMENT_3D('',#3492,#3493,#3494);
#3496=PLANE('',#3495);
#3497=ORIENTED_EDGE('',*,*,#3450,.T.);
#3499=ORIENTED_EDGE('',*,*,#3498,.F.);
#3500=ORIENTED_EDGE('',*,*,#3468,.T.);
#3501=ORIENTED_EDGE('',*,*,#3486,.F.);
#3502=EDGE_LOOP('',(#3497,#3499,#3500,#3501));
#3503=FACE_OUTER_BOUND('',#3502,.F.);
#3504=ADVANCED_FACE('',(#3503),#3496,.T.);
#3505=CARTESIAN_POINT('',(2.245220252917E2,1.752311153712E2,2.34E1));
#3506=DIRECTION('',(1.E0,0.E0,0.E0));
#3507=DIRECTION('',(0.E0,-5.E-1,-8.660254037844E-1));
#3508=AXIS2_PLACEMENT_3D('',#3505,#3506,#3507);
#3509=PLANE('',#3508);
#3510=ORIENTED_EDGE('',*,*,#3448,.F.);
#3512=ORIENTED_EDGE('',*,*,#3511,.F.);
#3513=ORIENTED_EDGE('',*,*,#3470,.F.);
#3514=ORIENTED_EDGE('',*,*,#3498,.T.);
#3515=EDGE_LOOP('',(#3510,#3512,#3513,#3514));
#3516=FACE_OUTER_BOUND('',#3515,.F.);
#3517=ADVANCED_FACE('',(#3516),#3509,.F.);
#3518=CARTESIAN_POINT('',(2.245220252917E2,1.784122218423E2,2.756615081617E1));
#3519=DIRECTION('',(0.E0,-8.660254037844E-1,5.E-1));
#3520=DIRECTION('',(0.E0,5.E-1,8.660254037844E-1));
#3521=AXIS2_PLACEMENT_3D('',#3518,#3519,#3520);
#3522=PLANE('',#3521);
#3523=ORIENTED_EDGE('',*,*,#3446,.T.);
#3525=ORIENTED_EDGE('',*,*,#3524,.F.);
#3526=ORIENTED_EDGE('',*,*,#3472,.T.);
#3527=ORIENTED_EDGE('',*,*,#3511,.T.);
#3528=EDGE_LOOP('',(#3523,#3525,#3526,#3527));
#3529=FACE_OUTER_BOUND('',#3528,.F.);
#3530=ADVANCED_FACE('',(#3529),#3522,.T.);
#3531=CARTESIAN_POINT('',(2.230619610031E2,1.717670137561E2,2.54E1));
#3532=DIRECTION('',(-1.E0,0.E0,0.E0));
#3533=DIRECTION('',(0.E0,5.E-1,8.660254037844E-1));
#3534=AXIS2_PLACEMENT_3D('',#3531,#3532,#3533);
#3535=PLANE('',#3534);
#3536=ORIENTED_EDGE('',*,*,#3524,.T.);
#3537=ORIENTED_EDGE('',*,*,#3444,.F.);
#3538=ORIENTED_EDGE('',*,*,#3474,.F.);
#3539=EDGE_LOOP('',(#3536,#3537,#3538));
#3540=FACE_OUTER_BOUND('',#3539,.F.);
#3541=ADVANCED_FACE('',(#3540),#3535,.T.);
#3542=CLOSED_SHELL('',(#3395,#3406,#3419,#3435,#3458,#3479,#3491,#3504,#3517,
#3530,#3541));
#3543=MANIFOLD_SOLID_BREP('',#3542);
#3545=DIMENSIONAL_EXPONENTS(0.E0,0.E0,0.E0,0.E0,0.E0,0.E0,0.E0);
#3547=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(1.745329251994E-2),
#3546);
#3548=(CONVERSION_BASED_UNIT('DEGREE',#3547)NAMED_UNIT(*)PLANE_ANGLE_UNIT());
#3550=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(2.019931699834E-3),#3544,
'closure',
'Maximum model space distance between geometric entities at asserted connectivities');
#3551=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((
#3550))GLOBAL_UNIT_ASSIGNED_CONTEXT((#3544,#3548,#3549))REPRESENTATION_CONTEXT(
'ID7','3'));
#3552=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#3553=DIRECTION('',(0.E0,0.E0,1.E0));
#3554=DIRECTION('',(1.E0,0.E0,0.E0));
#3557=DESIGN_CONTEXT('',#863,'design');
#3558=MECHANICAL_CONTEXT('',#863,'mechanical');
#3559=PRODUCT('LAD4-3DSOLID_5970','LAD4-3DSOLID_5970','NOT SPECIFIED',(#3558));
#3560=PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE('1','LAST_VERSION',
#3559,.MADE.);
#3566=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#3567=DIRECTION('',(0.E0,0.E0,1.E0));
#3568=DIRECTION('',(1.E0,0.E0,0.E0));
#3569=AXIS2_PLACEMENT_3D('',#3566,#3567,#3568);
#3570=ITEM_DEFINED_TRANSFORMATION('','',#3555,#3569);
#3571=(REPRESENTATION_RELATIONSHIP('','',#3556,#874)REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#3570)SHAPE_REPRESENTATION_RELATIONSHIP());
#3572=CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#3571,#3565);
#3573=CARTESIAN_POINT('',(2.437127626369E2,1.802344114560E2,9.7E1));
#3574=DIRECTION('',(0.E0,-1.E0,0.E0));
#3575=DIRECTION('',(-1.E0,0.E0,0.E0));
#3576=AXIS2_PLACEMENT_3D('',#3573,#3574,#3575);
#3578=CARTESIAN_POINT('',(2.437127626369E2,1.802344114560E2,9.7E1));
#3579=DIRECTION('',(0.E0,-1.E0,0.E0));
#3580=DIRECTION('',(1.E0,0.E0,0.E0));
#3581=AXIS2_PLACEMENT_3D('',#3578,#3579,#3580);
#3583=DIRECTION('',(0.E0,1.E0,0.E0));
#3584=VECTOR('',#3583,1.05E1);
#3585=CARTESIAN_POINT('',(2.587127626369E2,1.802344114560E2,9.7E1));
#3586=LINE('',#3585,#3584);
#3587=DIRECTION('',(0.E0,1.E0,0.E0));
#3588=VECTOR('',#3587,1.05E1);
#3589=CARTESIAN_POINT('',(2.287127626369E2,1.802344114560E2,9.7E1));
#3590=LINE('',#3589,#3588);
#3591=CARTESIAN_POINT('',(2.437127626369E2,1.907344114560E2,9.7E1));
#3592=DIRECTION('',(0.E0,1.E0,0.E0));
#3593=DIRECTION('',(-1.E0,0.E0,0.E0));
#3594=AXIS2_PLACEMENT_3D('',#3591,#3592,#3593);
#3596=CARTESIAN_POINT('',(2.437127626369E2,1.907344114560E2,9.7E1));
#3597=DIRECTION('',(0.E0,1.E0,0.E0));
#3598=DIRECTION('',(1.E0,0.E0,0.E0));
#3599=AXIS2_PLACEMENT_3D('',#3596,#3597,#3598);
#3601=CARTESIAN_POINT('',(2.437127626369E2,1.907344114560E2,9.7E1));
#3602=DIRECTION('',(0.E0,-1.E0,0.E0));
#3603=DIRECTION('',(-1.E0,0.E0,0.E0));
#3604=AXIS2_PLACEMENT_3D('',#3601,#3602,#3603);
#3606=CARTESIAN_POINT('',(2.437127626369E2,1.907344114560E2,9.7E1));
#3607=DIRECTION('',(0.E0,-1.E0,0.E0));
#3608=DIRECTION('',(1.E0,0.E0,0.E0));
#3609=AXIS2_PLACEMENT_3D('',#3606,#3607,#3608);
#3611=CARTESIAN_POINT('',(2.437127626369E2,2.012344114560E2,9.7E1));
#3612=DIRECTION('',(0.E0,1.E0,0.E0));
#3613=DIRECTION('',(-1.E0,0.E0,0.E0));
#3614=AXIS2_PLACEMENT_3D('',#3611,#3612,#3613);
#3616=CARTESIAN_POINT('',(2.437127626369E2,2.012344114560E2,9.7E1));
#3617=DIRECTION('',(0.E0,1.E0,0.E0));
#3618=DIRECTION('',(1.E0,0.E0,0.E0));
#3619=AXIS2_PLACEMENT_3D('',#3616,#3617,#3618);
#3621=CARTESIAN_POINT('',(2.437127626369E2,2.012344114560E2,9.7E1));
#3622=DIRECTION('',(0.E0,-1.E0,0.E0));
#3623=DIRECTION('',(-1.E0,0.E0,0.E0));
#3624=AXIS2_PLACEMENT_3D('',#3621,#3622,#3623);
#3626=CARTESIAN_POINT('',(2.437127626369E2,2.012344114560E2,9.7E1));
#3627=DIRECTION('',(0.E0,-1.E0,0.E0));
#3628=DIRECTION('',(1.E0,0.E0,0.E0));
#3629=AXIS2_PLACEMENT_3D('',#3626,#3627,#3628);
#3631=DIRECTION('',(0.E0,-1.E0,0.E0));
#3632=VECTOR('',#3631,1.05E1);
#3633=CARTESIAN_POINT('',(2.602127626369E2,2.012344114560E2,9.7E1));
#3634=LINE('',#3633,#3632);
#3635=DIRECTION('',(0.E0,-1.E0,0.E0));
#3636=VECTOR('',#3635,1.05E1);
#3637=CARTESIAN_POINT('',(2.272127626369E2,2.012344114560E2,9.7E1));
#3638=LINE('',#3637,#3636);
#3639=CARTESIAN_POINT('',(2.437127626369E2,2.222344114560E2,9.7E1));
#3640=DIRECTION('',(0.E0,-1.E0,0.E0));
#3641=DIRECTION('',(-1.E0,0.E0,0.E0));
#3642=AXIS2_PLACEMENT_3D('',#3639,#3640,#3641);
#3644=CARTESIAN_POINT('',(2.437127626369E2,2.222344114560E2,9.7E1));
#3645=DIRECTION('',(0.E0,-1.E0,0.E0));
#3646=DIRECTION('',(1.E0,0.E0,0.E0));
#3647=AXIS2_PLACEMENT_3D('',#3644,#3645,#3646);
#3649=CARTESIAN_POINT('',(2.437127626369E2,2.222344114560E2,9.7E1));
#3650=DIRECTION('',(0.E0,1.E0,0.E0));
#3651=DIRECTION('',(-1.E0,0.E0,0.E0));
#3652=AXIS2_PLACEMENT_3D('',#3649,#3650,#3651);
#3654=CARTESIAN_POINT('',(2.437127626369E2,2.222344114560E2,9.7E1));
#3655=DIRECTION('',(0.E0,1.E0,0.E0));
#3656=DIRECTION('',(1.E0,0.E0,0.E0));
#3657=AXIS2_PLACEMENT_3D('',#3654,#3655,#3656);
#3659=DIRECTION('',(0.E0,1.E0,0.E0));
#3660=VECTOR('',#3659,3.E0);
#3661=CARTESIAN_POINT('',(2.257127626369E2,2.192344114560E2,9.7E1));
#3662=LINE('',#3661,#3660);
#3663=DIRECTION('',(0.E0,1.E0,0.E0));
#3664=VECTOR('',#3663,3.E0);
#3665=CARTESIAN_POINT('',(2.617127626369E2,2.192344114560E2,9.7E1));
#3666=LINE('',#3665,#3664);
#3667=CARTESIAN_POINT('',(2.437127626369E2,2.192344114560E2,9.7E1));
#3668=DIRECTION('',(0.E0,-1.E0,0.E0));
#3669=DIRECTION('',(1.E0,0.E0,0.E0));
#3670=AXIS2_PLACEMENT_3D('',#3667,#3668,#3669);
#3672=CARTESIAN_POINT('',(2.437127626369E2,2.192344114560E2,9.7E1));
#3673=DIRECTION('',(0.E0,-1.E0,0.E0));
#3674=DIRECTION('',(-1.E0,0.E0,0.E0));
#3675=AXIS2_PLACEMENT_3D('',#3672,#3673,#3674);
#3677=CARTESIAN_POINT('',(2.437127626369E2,2.192344114560E2,9.7E1));
#3678=DIRECTION('',(0.E0,1.E0,0.E0));
#3679=DIRECTION('',(-1.E0,0.E0,0.E0));
#3680=AXIS2_PLACEMENT_3D('',#3677,#3678,#3679);
#3682=CARTESIAN_POINT('',(2.437127626369E2,2.192344114560E2,9.7E1));
#3683=DIRECTION('',(0.E0,1.E0,0.E0));
#3684=DIRECTION('',(1.E0,0.E0,0.E0));
#3685=AXIS2_PLACEMENT_3D('',#3682,#3683,#3684);
#3687=DIRECTION('',(0.E0,-1.E0,0.E0));
#3688=VECTOR('',#3687,4.066781895026E0);
#3689=CARTESIAN_POINT('',(2.454627626369E2,2.192344114560E2,9.7E1));
#3690=LINE('',#3689,#3688);
#3691=DIRECTION('',(0.E0,-1.E0,0.E0));
#3692=VECTOR('',#3691,4.066781895026E0);
#3693=CARTESIAN_POINT('',(2.419627626369E2,2.192344114560E2,9.7E1));
#3694=LINE('',#3693,#3692);
#3695=CARTESIAN_POINT('',(2.437127626369E2,2.151676295610E2,9.7E1));
#3696=DIRECTION('',(0.E0,1.E0,0.E0));
#3697=DIRECTION('',(1.E0,0.E0,0.E0));
#3698=AXIS2_PLACEMENT_3D('',#3695,#3696,#3697);
#3700=CARTESIAN_POINT('',(2.437127626369E2,2.151676295610E2,9.7E1));
#3701=DIRECTION('',(0.E0,1.E0,0.E0));
#3702=DIRECTION('',(-1.E0,0.E0,0.E0));
#3703=AXIS2_PLACEMENT_3D('',#3700,#3701,#3702);
#3705=DIRECTION('',(0.E0,-1.E0,0.E0));
#3706=VECTOR('',#3705,2.1E1);
#3707=CARTESIAN_POINT('',(2.637127626369E2,2.222344114560E2,9.7E1));
#3708=LINE('',#3707,#3706);
#3709=DIRECTION('',(0.E0,-1.E0,0.E0));
#3710=VECTOR('',#3709,2.1E1);
#3711=CARTESIAN_POINT('',(2.237127626369E2,2.222344114560E2,9.7E1));
#3712=LINE('',#3711,#3710);
#3713=CARTESIAN_POINT('',(2.587127626369E2,1.802344114560E2,9.7E1));
#3714=CARTESIAN_POINT('',(2.587127626369E2,1.907344114560E2,9.7E1));
#3715=VERTEX_POINT('',#3713);
#3716=VERTEX_POINT('',#3714);
#3717=CARTESIAN_POINT('',(2.287127626369E2,1.802344114560E2,9.7E1));
#3718=CARTESIAN_POINT('',(2.287127626369E2,1.907344114560E2,9.7E1));
#3719=VERTEX_POINT('',#3717);
#3720=VERTEX_POINT('',#3718);
#3721=CARTESIAN_POINT('',(2.602127626369E2,2.012344114560E2,9.7E1));
#3722=CARTESIAN_POINT('',(2.602127626369E2,1.907344114560E2,9.7E1));
#3723=VERTEX_POINT('',#3721);
#3724=VERTEX_POINT('',#3722);
#3725=CARTESIAN_POINT('',(2.272127626369E2,2.012344114560E2,9.7E1));
#3726=CARTESIAN_POINT('',(2.272127626369E2,1.907344114560E2,9.7E1));
#3727=VERTEX_POINT('',#3725);
#3728=VERTEX_POINT('',#3726);
#3729=CARTESIAN_POINT('',(2.454627626369E2,2.192344114560E2,9.7E1));
#3730=CARTESIAN_POINT('',(2.454627626369E2,2.151676295610E2,9.7E1));
#3731=VERTEX_POINT('',#3729);
#3732=VERTEX_POINT('',#3730);
#3733=CARTESIAN_POINT('',(2.419627626369E2,2.192344114560E2,9.7E1));
#3734=CARTESIAN_POINT('',(2.419627626369E2,2.151676295610E2,9.7E1));
#3735=VERTEX_POINT('',#3733);
#3736=VERTEX_POINT('',#3734);
#3737=CARTESIAN_POINT('',(2.257127626369E2,2.192344114560E2,9.7E1));
#3738=CARTESIAN_POINT('',(2.257127626369E2,2.222344114560E2,9.7E1));
#3739=VERTEX_POINT('',#3737);
#3740=VERTEX_POINT('',#3738);
#3741=CARTESIAN_POINT('',(2.617127626369E2,2.192344114560E2,9.7E1));
#3742=CARTESIAN_POINT('',(2.617127626369E2,2.222344114560E2,9.7E1));
#3743=VERTEX_POINT('',#3741);
#3744=VERTEX_POINT('',#3742);
#3745=CARTESIAN_POINT('',(2.637127626369E2,2.222344114560E2,9.7E1));
#3746=CARTESIAN_POINT('',(2.637127626369E2,2.012344114560E2,9.7E1));
#3747=VERTEX_POINT('',#3745);
#3748=VERTEX_POINT('',#3746);
#3749=CARTESIAN_POINT('',(2.237127626369E2,2.222344114560E2,9.7E1));
#3750=CARTESIAN_POINT('',(2.237127626369E2,2.012344114560E2,9.7E1));
#3751=VERTEX_POINT('',#3749);
#3752=VERTEX_POINT('',#3750);
#3753=CARTESIAN_POINT('',(2.437127626369E2,1.907344114560E2,9.7E1));
#3754=DIRECTION('',(0.E0,1.E0,0.E0));
#3755=DIRECTION('',(-1.E0,0.E0,0.E0));
#3756=AXIS2_PLACEMENT_3D('',#3753,#3754,#3755);
#3757=CYLINDRICAL_SURFACE('',#3756,1.5E1);
#3759=ORIENTED_EDGE('',*,*,#3758,.T.);
#3761=ORIENTED_EDGE('',*,*,#3760,.T.);
#3763=ORIENTED_EDGE('',*,*,#3762,.T.);
#3765=ORIENTED_EDGE('',*,*,#3764,.F.);
#3766=EDGE_LOOP('',(#3759,#3761,#3763,#3765));
#3767=FACE_OUTER_BOUND('',#3766,.F.);
#3768=ADVANCED_FACE('',(#3767),#3757,.T.);
#3769=CARTESIAN_POINT('',(2.287127626369E2,1.802344114560E2,9.7E1));
#3770=DIRECTION('',(0.E0,1.E0,0.E0));
#3771=DIRECTION('',(0.E0,0.E0,1.E0));
#3772=AXIS2_PLACEMENT_3D('',#3769,#3770,#3771);
#3773=PLANE('',#3772);
#3775=ORIENTED_EDGE('',*,*,#3774,.F.);
#3776=ORIENTED_EDGE('',*,*,#3758,.F.);
#3777=EDGE_LOOP('',(#3775,#3776));
#3778=FACE_OUTER_BOUND('',#3777,.F.);
#3779=ADVANCED_FACE('',(#3778),#3773,.F.);
#3780=CARTESIAN_POINT('',(2.437127626369E2,1.907344114560E2,9.7E1));
#3781=DIRECTION('',(0.E0,1.E0,0.E0));
#3782=DIRECTION('',(-1.E0,0.E0,0.E0));
#3783=AXIS2_PLACEMENT_3D('',#3780,#3781,#3782);
#3784=CYLINDRICAL_SURFACE('',#3783,1.5E1);
#3785=ORIENTED_EDGE('',*,*,#3774,.T.);
#3786=ORIENTED_EDGE('',*,*,#3764,.T.);
#3788=ORIENTED_EDGE('',*,*,#3787,.T.);
#3789=ORIENTED_EDGE('',*,*,#3760,.F.);
#3790=EDGE_LOOP('',(#3785,#3786,#3788,#3789));
#3791=FACE_OUTER_BOUND('',#3790,.F.);
#3792=ADVANCED_FACE('',(#3791),#3784,.T.);
#3793=CARTESIAN_POINT('',(2.437127626369E2,1.907344114560E2,9.7E1));
#3794=DIRECTION('',(0.E0,1.E0,0.E0));
#3795=DIRECTION('',(0.E0,0.E0,1.E0));
#3796=AXIS2_PLACEMENT_3D('',#3793,#3794,#3795);
#3797=PLANE('',#3796);
#3799=ORIENTED_EDGE('',*,*,#3798,.F.);
#3801=ORIENTED_EDGE('',*,*,#3800,.F.);
#3802=EDGE_LOOP('',(#3799,#3801));
#3803=FACE_OUTER_BOUND('',#3802,.F.);
#3804=ORIENTED_EDGE('',*,*,#3762,.F.);
#3805=ORIENTED_EDGE('',*,*,#3787,.F.);
#3806=EDGE_LOOP('',(#3804,#3805));
#3807=FACE_BOUND('',#3806,.F.);
#3808=ADVANCED_FACE('',(#3803,#3807),#3797,.F.);
#3809=CARTESIAN_POINT('',(2.437127626369E2,1.907344114560E2,9.7E1));
#3810=DIRECTION('',(0.E0,-1.E0,0.E0));
#3811=DIRECTION('',(-1.E0,0.E0,0.E0));
#3812=AXIS2_PLACEMENT_3D('',#3809,#3810,#3811);
#3813=CYLINDRICAL_SURFACE('',#3812,1.65E1);
#3815=ORIENTED_EDGE('',*,*,#3814,.T.);
#3817=ORIENTED_EDGE('',*,*,#3816,.T.);
#3818=ORIENTED_EDGE('',*,*,#3798,.T.);
#3820=ORIENTED_EDGE('',*,*,#3819,.F.);
#3821=EDGE_LOOP('',(#3815,#3817,#3818,#3820));
#3822=FACE_OUTER_BOUND('',#3821,.F.);
#3823=ADVANCED_FACE('',(#3822),#3813,.T.);
#3824=CARTESIAN_POINT('',(2.437127626369E2,2.012344114560E2,9.7E1));
#3825=DIRECTION('',(0.E0,1.E0,0.E0));
#3826=DIRECTION('',(0.E0,0.E0,1.E0));
#3827=AXIS2_PLACEMENT_3D('',#3824,#3825,#3826);
#3828=PLANE('',#3827);
#3830=ORIENTED_EDGE('',*,*,#3829,.F.);
#3832=ORIENTED_EDGE('',*,*,#3831,.F.);
#3833=EDGE_LOOP('',(#3830,#3832));
#3834=FACE_OUTER_BOUND('',#3833,.F.);
#3836=ORIENTED_EDGE('',*,*,#3835,.F.);
#3837=ORIENTED_EDGE('',*,*,#3814,.F.);
#3838=EDGE_LOOP('',(#3836,#3837));
#3839=FACE_BOUND('',#3838,.F.);
#3840=ADVANCED_FACE('',(#3834,#3839),#3828,.F.);
#3841=CARTESIAN_POINT('',(2.437127626369E2,1.907344114560E2,9.7E1));
#3842=DIRECTION('',(0.E0,-1.E0,0.E0));
#3843=DIRECTION('',(-1.E0,0.E0,0.E0));
#3844=AXIS2_PLACEMENT_3D('',#3841,#3842,#3843);
#3845=CYLINDRICAL_SURFACE('',#3844,1.65E1);
#3846=ORIENTED_EDGE('',*,*,#3835,.T.);
#3847=ORIENTED_EDGE('',*,*,#3819,.T.);
#3848=ORIENTED_EDGE('',*,*,#3800,.T.);
#3849=ORIENTED_EDGE('',*,*,#3816,.F.);
#3850=EDGE_LOOP('',(#3846,#3847,#3848,#3849));
#3851=FACE_OUTER_BOUND('',#3850,.F.);
#3852=ADVANCED_FACE('',(#3851),#3845,.T.);
#3853=CARTESIAN_POINT('',(2.437127626369E2,2.012344114560E2,9.7E1));
#3854=DIRECTION('',(0.E0,-1.E0,0.E0));
#3855=DIRECTION('',(-1.E0,0.E0,0.E0));
#3856=AXIS2_PLACEMENT_3D('',#3853,#3854,#3855);
#3857=CYLINDRICAL_SURFACE('',#3856,2.E1);
#3859=ORIENTED_EDGE('',*,*,#3858,.T.);
#3861=ORIENTED_EDGE('',*,*,#3860,.T.);
#3862=ORIENTED_EDGE('',*,*,#3829,.T.);
#3864=ORIENTED_EDGE('',*,*,#3863,.F.);
#3865=EDGE_LOOP('',(#3859,#3861,#3862,#3864));
#3866=FACE_OUTER_BOUND('',#3865,.F.);
#3867=ADVANCED_FACE('',(#3866),#3857,.T.);
#3868=CARTESIAN_POINT('',(2.237127626369E2,2.222344114560E2,9.7E1));
#3869=DIRECTION('',(0.E0,1.E0,0.E0));
#3870=DIRECTION('',(0.E0,0.E0,1.E0));
#3871=AXIS2_PLACEMENT_3D('',#3868,#3869,#3870);
#3872=PLANE('',#3871);
#3874=ORIENTED_EDGE('',*,*,#3873,.F.);
#3875=ORIENTED_EDGE('',*,*,#3858,.F.);
#3876=EDGE_LOOP('',(#3874,#3875));
#3877=FACE_OUTER_BOUND('',#3876,.F.);
#3879=ORIENTED_EDGE('',*,*,#3878,.F.);
#3881=ORIENTED_EDGE('',*,*,#3880,.F.);
#3882=EDGE_LOOP('',(#3879,#3881));
#3883=FACE_BOUND('',#3882,.F.);
#3884=ADVANCED_FACE('',(#3877,#3883),#3872,.T.);
#3885=CARTESIAN_POINT('',(2.437127626369E2,2.222344114560E2,9.7E1));
#3886=DIRECTION('',(0.E0,1.E0,0.E0));
#3887=DIRECTION('',(-1.E0,0.E0,0.E0));
#3888=AXIS2_PLACEMENT_3D('',#3885,#3886,#3887);
#3889=CYLINDRICAL_SURFACE('',#3888,1.8E1);
#3891=ORIENTED_EDGE('',*,*,#3890,.T.);
#3893=ORIENTED_EDGE('',*,*,#3892,.T.);
#3894=ORIENTED_EDGE('',*,*,#3878,.T.);
#3896=ORIENTED_EDGE('',*,*,#3895,.F.);
#3897=EDGE_LOOP('',(#3891,#3893,#3894,#3896));
#3898=FACE_OUTER_BOUND('',#3897,.F.);
#3899=ADVANCED_FACE('',(#3898),#3889,.F.);
#3900=CARTESIAN_POINT('',(2.257127626369E2,2.192344114560E2,9.7E1));
#3901=DIRECTION('',(0.E0,1.E0,0.E0));
#3902=DIRECTION('',(0.E0,0.E0,1.E0));
#3903=AXIS2_PLACEMENT_3D('',#3900,#3901,#3902);
#3904=PLANE('',#3903);
#3906=ORIENTED_EDGE('',*,*,#3905,.F.);
#3907=ORIENTED_EDGE('',*,*,#3890,.F.);
#3908=EDGE_LOOP('',(#3906,#3907));
#3909=FACE_OUTER_BOUND('',#3908,.F.);
#3911=ORIENTED_EDGE('',*,*,#3910,.F.);
#3913=ORIENTED_EDGE('',*,*,#3912,.F.);
#3914=EDGE_LOOP('',(#3911,#3913));
#3915=FACE_BOUND('',#3914,.F.);
#3916=ADVANCED_FACE('',(#3909,#3915),#3904,.T.);
#3917=CARTESIAN_POINT('',(2.437127626369E2,2.151676295610E2,9.7E1));
#3918=DIRECTION('',(0.E0,-1.E0,0.E0));
#3919=DIRECTION('',(1.E0,0.E0,0.E0));
#3920=AXIS2_PLACEMENT_3D('',#3917,#3918,#3919);
#3921=CYLINDRICAL_SURFACE('',#3920,1.75E0);
#3922=ORIENTED_EDGE('',*,*,#3910,.T.);
#3924=ORIENTED_EDGE('',*,*,#3923,.T.);
#3926=ORIENTED_EDGE('',*,*,#3925,.T.);
#3928=ORIENTED_EDGE('',*,*,#3927,.F.);
#3929=EDGE_LOOP('',(#3922,#3924,#3926,#3928));
#3930=FACE_OUTER_BOUND('',#3929,.F.);
#3931=ADVANCED_FACE('',(#3930),#3921,.F.);
#3932=CARTESIAN_POINT('',(2.437127626369E2,2.151676295610E2,9.7E1));
#3933=DIRECTION('',(0.E0,-1.E0,0.E0));
#3934=DIRECTION('',(1.E0,0.E0,0.E0));
#3935=AXIS2_PLACEMENT_3D('',#3932,#3933,#3934);
#3936=CYLINDRICAL_SURFACE('',#3935,1.75E0);
#3937=ORIENTED_EDGE('',*,*,#3912,.T.);
#3938=ORIENTED_EDGE('',*,*,#3927,.T.);
#3940=ORIENTED_EDGE('',*,*,#3939,.T.);
#3941=ORIENTED_EDGE('',*,*,#3923,.F.);
#3942=EDGE_LOOP('',(#3937,#3938,#3940,#3941));
#3943=FACE_OUTER_BOUND('',#3942,.F.);
#3944=ADVANCED_FACE('',(#3943),#3936,.F.);
#3945=CARTESIAN_POINT('',(2.437127626369E2,2.151676295610E2,9.7E1));
#3946=DIRECTION('',(0.E0,-1.E0,0.E0));
#3947=DIRECTION('',(0.E0,0.E0,-1.E0));
#3948=AXIS2_PLACEMENT_3D('',#3945,#3946,#3947);
#3949=PLANE('',#3948);
#3950=ORIENTED_EDGE('',*,*,#3939,.F.);
#3951=ORIENTED_EDGE('',*,*,#3925,.F.);
#3952=EDGE_LOOP('',(#3950,#3951));
#3953=FACE_OUTER_BOUND('',#3952,.F.);
#3954=ADVANCED_FACE('',(#3953),#3949,.F.);
#3955=CARTESIAN_POINT('',(2.437127626369E2,2.222344114560E2,9.7E1));
#3956=DIRECTION('',(0.E0,1.E0,0.E0));
#3957=DIRECTION('',(-1.E0,0.E0,0.E0));
#3958=AXIS2_PLACEMENT_3D('',#3955,#3956,#3957);
#3959=CYLINDRICAL_SURFACE('',#3958,1.8E1);
#3960=ORIENTED_EDGE('',*,*,#3905,.T.);
#3961=ORIENTED_EDGE('',*,*,#3895,.T.);
#3962=ORIENTED_EDGE('',*,*,#3880,.T.);
#3963=ORIENTED_EDGE('',*,*,#3892,.F.);
#3964=EDGE_LOOP('',(#3960,#3961,#3962,#3963));
#3965=FACE_OUTER_BOUND('',#3964,.F.);
#3966=ADVANCED_FACE('',(#3965),#3959,.F.);
#3967=CARTESIAN_POINT('',(2.437127626369E2,2.012344114560E2,9.7E1));
#3968=DIRECTION('',(0.E0,-1.E0,0.E0));
#3969=DIRECTION('',(-1.E0,0.E0,0.E0));
#3970=AXIS2_PLACEMENT_3D('',#3967,#3968,#3969);
#3971=CYLINDRICAL_SURFACE('',#3970,2.E1);
#3972=ORIENTED_EDGE('',*,*,#3873,.T.);
#3973=ORIENTED_EDGE('',*,*,#3863,.T.);
#3974=ORIENTED_EDGE('',*,*,#3831,.T.);
#3975=ORIENTED_EDGE('',*,*,#3860,.F.);
#3976=EDGE_LOOP('',(#3972,#3973,#3974,#3975));
#3977=FACE_OUTER_BOUND('',#3976,.F.);
#3978=ADVANCED_FACE('',(#3977),#3971,.T.);
#3979=CLOSED_SHELL('',(#3768,#3779,#3792,#3808,#3823,#3840,#3852,#3867,#3884,
#3899,#3916,#3931,#3944,#3954,#3966,#3978));
#3980=MANIFOLD_SOLID_BREP('',#3979);
#3982=DIMENSIONAL_EXPONENTS(0.E0,0.E0,0.E0,0.E0,0.E0,0.E0,0.E0);
#3984=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(1.745329251994E-2),
#3983);
#3985=(CONVERSION_BASED_UNIT('DEGREE',#3984)NAMED_UNIT(*)PLANE_ANGLE_UNIT());
#3987=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(7.045284158884E-3),#3981,
'closure',
'Maximum model space distance between geometric entities at asserted connectivities');
#3988=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((
#3987))GLOBAL_UNIT_ASSIGNED_CONTEXT((#3981,#3985,#3986))REPRESENTATION_CONTEXT(
'ID8','3'));
#3989=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#3990=DIRECTION('',(0.E0,0.E0,1.E0));
#3991=DIRECTION('',(1.E0,0.E0,0.E0));
#3994=MECHANICAL_CONTEXT('',#863,'mechanical');
#3995=PRODUCT('LAD4-3DSOLID_5979','LAD4-3DSOLID_5979','NOT SPECIFIED',(#3994));
#3996=PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE('1','LAST_VERSION',
#3995,.MADE.);
#4002=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#4003=DIRECTION('',(0.E0,0.E0,1.E0));
#4004=DIRECTION('',(1.E0,0.E0,0.E0));
#4005=AXIS2_PLACEMENT_3D('',#4002,#4003,#4004);
#4006=ITEM_DEFINED_TRANSFORMATION('','',#3992,#4005);
#4007=(REPRESENTATION_RELATIONSHIP('','',#3993,#874)REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#4006)SHAPE_REPRESENTATION_RELATIONSHIP());
#4008=CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#4007,#4001);
#4009=DIRECTION('',(0.E0,0.E0,1.E0));
#4010=VECTOR('',#4009,1.2E1);
#4011=CARTESIAN_POINT('',(2.352127626369E2,1.982311153712E2,5.619576403560E1));
#4012=LINE('',#4011,#4010);
#4013=DIRECTION('',(0.E0,1.E0,0.E0));
#4014=VECTOR('',#4013,1.143113805150E1);
#4015=CARTESIAN_POINT('',(2.352127626369E2,1.867999773197E2,5.619576403560E1));
#4016=LINE('',#4015,#4014);
#4017=DIRECTION('',(0.E0,0.E0,-1.E0));
#4018=VECTOR('',#4017,1.2E1);
#4019=CARTESIAN_POINT('',(2.352127626369E2,1.867999773197E2,6.819576403560E1));
#4020=LINE('',#4019,#4018);
#4021=DIRECTION('',(0.E0,-1.E0,0.E0));
#4022=VECTOR('',#4021,1.143113805150E1);
#4023=CARTESIAN_POINT('',(2.352127626369E2,1.982311153712E2,6.819576403560E1));
#4024=LINE('',#4023,#4022);
#4025=DIRECTION('',(0.E0,0.E0,-1.E0));
#4026=VECTOR('',#4025,1.2E1);
#4027=CARTESIAN_POINT('',(2.532127626369E2,1.982311153712E2,6.819576403560E1));
#4028=LINE('',#4027,#4026);
#4029=DIRECTION('',(0.E0,1.E0,0.E0));
#4030=VECTOR('',#4029,1.143113805150E1);
#4031=CARTESIAN_POINT('',(2.532127626369E2,1.867999773197E2,6.819576403560E1));
#4032=LINE('',#4031,#4030);
#4033=DIRECTION('',(0.E0,0.E0,1.E0));
#4034=VECTOR('',#4033,1.2E1);
#4035=CARTESIAN_POINT('',(2.532127626369E2,1.867999773197E2,5.619576403560E1));
#4036=LINE('',#4035,#4034);
#4037=DIRECTION('',(1.E0,0.E0,0.E0));
#4038=VECTOR('',#4037,1.8E1);
#4039=CARTESIAN_POINT('',(2.352127626369E2,1.982311153712E2,6.819576403560E1));
#4040=LINE('',#4039,#4038);
#4041=DIRECTION('',(-1.E0,0.E0,0.E0));
#4042=VECTOR('',#4041,1.8E1);
#4043=CARTESIAN_POINT('',(2.532127626369E2,1.867999773197E2,6.819576403560E1));
#4044=LINE('',#4043,#4042);
#4045=DIRECTION('',(-1.E0,0.E0,0.E0));
#4046=VECTOR('',#4045,1.8E1);
#4047=CARTESIAN_POINT('',(2.532127626369E2,1.982311153712E2,5.619576403560E1));
#4048=LINE('',#4047,#4046);
#4049=DIRECTION('',(0.E0,1.E0,0.E0));
#4050=VECTOR('',#4049,1.143113805150E1);
#4051=CARTESIAN_POINT('',(2.532127626369E2,1.867999773197E2,5.619576403560E1));
#4052=LINE('',#4051,#4050);
#4053=DIRECTION('',(1.E0,0.E0,0.E0));
#4054=VECTOR('',#4053,1.8E1);
#4055=CARTESIAN_POINT('',(2.352127626369E2,1.867999773197E2,5.619576403560E1));
#4056=LINE('',#4055,#4054);
#4057=CARTESIAN_POINT('',(2.312127626369E2,1.982311153712E2,7.3E1));
#4058=CARTESIAN_POINT('',(2.310259171209E2,1.982311153712E2,7.318684551593E1));
#4059=CARTESIAN_POINT('',(2.306662220084E2,1.981798294425E2,7.354659368936E1));
#4060=CARTESIAN_POINT('',(2.301771854654E2,1.979680621800E2,7.403549890274E1));
#4061=CARTESIAN_POINT('',(2.299142792913E2,1.977610591504E2,7.429848334552E1));
#4062=CARTESIAN_POINT('',(2.297985490745E2,1.976453289336E2,7.441421356237E1));
#4064=DIRECTION('',(-1.E0,0.E0,0.E0));
#4065=VECTOR('',#4064,2.6E1);
#4066=CARTESIAN_POINT('',(2.572127626369E2,1.982311153712E2,7.3E1));
#4067=LINE('',#4066,#4065);
#4068=CARTESIAN_POINT('',(2.586269761992E2,1.976453289336E2,7.441421356237E1));
#4069=CARTESIAN_POINT('',(2.585106896836E2,1.977616154492E2,7.429792704673E1));
#4070=CARTESIAN_POINT('',(2.582468720292E2,1.979689907249E2,7.403403093347E1));
#4071=CARTESIAN_POINT('',(2.577577757452E2,1.981801853812E2,7.354506837768E1));
#4072=CARTESIAN_POINT('',(2.573989505165E2,1.982311153712E2,7.318618787967E1));
#4073=CARTESIAN_POINT('',(2.572127626369E2,1.982311153712E2,7.3E1));
#4075=CARTESIAN_POINT('',(2.592127626369E2,1.962311153712E2,7.5E1));
#4076=CARTESIAN_POINT('',(2.592127626369E2,1.962992425925E2,7.5E1));
#4077=CARTESIAN_POINT('',(2.592057543486E2,1.964364150744E2,7.499299171169E1));
#4078=CARTESIAN_POINT('',(2.591739987134E2,1.966412388464E2,7.496123607655E1));
#4079=CARTESIAN_POINT('',(2.591195634322E2,1.968472635188E2,7.490680079530E1));
#4080=CARTESIAN_POINT('',(2.590409692013E2,1.970523698372E2,7.482820656447E1));
#4081=CARTESIAN_POINT('',(2.589351109707E2,1.972567307259E2,7.472234833380E1));
#4082=CARTESIAN_POINT('',(2.588003163524E2,1.974558797024E2,7.458755371551E1));
#4083=CARTESIAN_POINT('',(2.586884119456E2,1.975838931872E2,7.447564930876E1));
#4084=CARTESIAN_POINT('',(2.586269761992E2,1.976453289336E2,7.441421356237E1));
#4086=DIRECTION('',(1.E0,0.E0,0.E0));
#4087=VECTOR('',#4086,3.E1);
#4088=CARTESIAN_POINT('',(2.292127626369E2,1.962311153712E2,7.5E1));
#4089=LINE('',#4088,#4087);
#4090=CARTESIAN_POINT('',(2.297985490745E2,1.976453289336E2,7.441421356237E1));
#4091=CARTESIAN_POINT('',(2.297371128227E2,1.975838926817E2,7.447564981421E1));
#4092=CARTESIAN_POINT('',(2.296252068421E2,1.974558771324E2,7.458755579475E1));
#4093=CARTESIAN_POINT('',(2.294904100215E2,1.972567245534E2,7.472235261535E1));
#4094=CARTESIAN_POINT('',(2.293845464057E2,1.970523487057E2,7.482821623121E1));
#4095=CARTESIAN_POINT('',(2.293059543907E2,1.968472422827E2,7.490680824621E1));
#4096=CARTESIAN_POINT('',(2.292515167267E2,1.966411926215E2,7.496124591014E1));
#4097=CARTESIAN_POINT('',(2.292197694749E2,1.964363910908E2,7.499299316194E1));
#4098=CARTESIAN_POINT('',(2.292127626369E2,1.962992329723E2,7.5E1));
#4099=CARTESIAN_POINT('',(2.292127626369E2,1.962311153712E2,7.5E1));
#4101=DIRECTION('',(0.E0,0.E0,1.E0));
#4102=VECTOR('',#4101,7.5E1);
#4103=CARTESIAN_POINT('',(2.292127626369E2,1.962311153712E2,0.E0));
#4104=LINE('',#4103,#4102);
#4105=DIRECTION('',(0.E0,0.E0,-1.E0));
#4106=VECTOR('',#4105,7.1E1);
#4107=CARTESIAN_POINT('',(2.312127626369E2,1.982311153712E2,7.3E1));
#4108=LINE('',#4107,#4106);
#4109=DIRECTION('',(0.E0,1.E0,0.E0));
#4110=VECTOR('',#4109,1.6E1);
#4111=CARTESIAN_POINT('',(2.292127626369E2,1.802311153712E2,7.5E1));
#4112=LINE('',#4111,#4110);
#4113=DIRECTION('',(0.E0,0.E0,1.E0));
#4114=VECTOR('',#4113,7.5E1);
#4115=CARTESIAN_POINT('',(2.292127626369E2,1.802311153712E2,0.E0));
#4116=LINE('',#4115,#4114);
#4117=DIRECTION('',(0.E0,-1.E0,0.E0));
#4118=VECTOR('',#4117,1.6E1);
#4119=CARTESIAN_POINT('',(2.292127626369E2,1.962311153712E2,0.E0));
#4120=LINE('',#4119,#4118);
#4121=DIRECTION('',(0.E0,1.E0,0.E0));
#4122=VECTOR('',#4121,1.6E1);
#4123=CARTESIAN_POINT('',(2.592127626369E2,1.802311153712E2,7.5E1));
#4124=LINE('',#4123,#4122);
#4125=DIRECTION('',(1.E0,0.E0,0.E0));
#4126=VECTOR('',#4125,3.E1);
#4127=CARTESIAN_POINT('',(2.292127626369E2,1.802311153712E2,7.5E1));
#4128=LINE('',#4127,#4126);
#4129=DIRECTION('',(0.E0,0.E0,1.E0));
#4130=VECTOR('',#4129,7.1E1);
#4131=CARTESIAN_POINT('',(2.572127626369E2,1.982311153712E2,2.E0));
#4132=LINE('',#4131,#4130);
#4133=CARTESIAN_POINT('',(2.586269761992E2,1.976453289336E2,5.857864376269E-1));
#4134=CARTESIAN_POINT('',(2.585106896836E2,1.977616154492E2,7.020729532660E-1));
#4135=CARTESIAN_POINT('',(2.582467935703E2,1.979689907249E2,9.658906076448E-1));
#4136=CARTESIAN_POINT('',(2.577578310146E2,1.981801853812E2,1.454986891722E0));
#4137=CARTESIAN_POINT('',(2.573989505165E2,1.982311153712E2,1.813812120334E0));
#4138=CARTESIAN_POINT('',(2.572127626369E2,1.982311153712E2,2.E0));
#4140=CARTESIAN_POINT('',(2.592127626369E2,1.962311153712E2,0.E0));
#4141=CARTESIAN_POINT('',(2.592127626369E2,1.962992425925E2,0.E0));
#4142=CARTESIAN_POINT('',(2.592057543486E2,1.964364150744E2,7.008288311295E-3));
#4143=CARTESIAN_POINT('',(2.591739987134E2,1.966412388464E2,3.876392345112E-2));
#4144=CARTESIAN_POINT('',(2.591195634322E2,1.968472635188E2,9.319920470344E-2));
#4145=CARTESIAN_POINT('',(2.590409692013E2,1.970523698372E2,1.717934355331E-1));
#4146=CARTESIAN_POINT('',(2.589351109707E2,1.972567307259E2,2.776516662031E-1));
#4147=CARTESIAN_POINT('',(2.588003163524E2,1.974558797024E2,4.124462844889E-1));
#4148=CARTESIAN_POINT('',(2.586884119456E2,1.975838931872E2,5.243506912404E-1));
#4149=CARTESIAN_POINT('',(2.586269761992E2,1.976453289336E2,5.857864376269E-1));
#4151=DIRECTION('',(0.E0,0.E0,-1.E0));
#4152=VECTOR('',#4151,7.5E1);
#4153=CARTESIAN_POINT('',(2.592127626369E2,1.962311153712E2,7.5E1));
#4154=LINE('',#4153,#4152);
#4155=DIRECTION('',(1.E0,0.E0,0.E0));
#4156=VECTOR('',#4155,2.6E1);
#4157=CARTESIAN_POINT('',(2.312127626369E2,1.982311153712E2,2.E0));
#4158=LINE('',#4157,#4156);
#4159=CARTESIAN_POINT('',(2.297985490745E2,1.976453289336E2,5.857864376269E-1));
#4160=CARTESIAN_POINT('',(2.299148355901E2,1.977616154492E2,7.020729532660E-1));
#4161=CARTESIAN_POINT('',(2.301786532445E2,1.979689907249E2,9.659690665347E-1));
#4162=CARTESIAN_POINT('',(2.306677495286E2,1.981801853812E2,1.454931622322E0));
#4163=CARTESIAN_POINT('',(2.310265747572E2,1.982311153712E2,1.813812120334E0));
#4164=CARTESIAN_POINT('',(2.312127626369E2,1.982311153712E2,2.E0));
#4166=CARTESIAN_POINT('',(2.292127626369E2,1.962311153712E2,0.E0));
#4167=CARTESIAN_POINT('',(2.292127626369E2,1.962992425925E2,0.E0));
#4168=CARTESIAN_POINT('',(2.292197709252E2,1.964364150744E2,7.008288311298E-3));
#4169=CARTESIAN_POINT('',(2.292515265603E2,1.966412388464E2,3.876392345113E-2));
#4170=CARTESIAN_POINT('',(2.293059618416E2,1.968472635188E2,9.319920470344E-2));
#4171=CARTESIAN_POINT('',(2.293845560724E2,1.970523698372E2,1.717934355331E-1));
#4172=CARTESIAN_POINT('',(2.294904143031E2,1.972567307259E2,2.776516662031E-1));
#4173=CARTESIAN_POINT('',(2.296252089214E2,1.974558797024E2,4.124462844889E-1));
#4174=CARTESIAN_POINT('',(2.297371133281E2,1.975838931872E2,5.243506912404E-1));
#4175=CARTESIAN_POINT('',(2.297985490745E2,1.976453289336E2,5.857864376269E-1));
#4177=DIRECTION('',(-1.E0,0.E0,0.E0));
#4178=VECTOR('',#4177,3.E1);
#4179=CARTESIAN_POINT('',(2.592127626369E2,1.962311153712E2,0.E0));
#4180=LINE('',#4179,#4178);
#4181=DIRECTION('',(-1.E0,0.E0,0.E0));
#4182=VECTOR('',#4181,3.E1);
#4183=CARTESIAN_POINT('',(2.592127626369E2,1.802311153712E2,0.E0));
#4184=LINE('',#4183,#4182);
#4185=DIRECTION('',(0.E0,-1.E0,0.E0));
#4186=VECTOR('',#4185,1.6E1);
#4187=CARTESIAN_POINT('',(2.592127626369E2,1.962311153712E2,0.E0));
#4188=LINE('',#4187,#4186);
#4189=DIRECTION('',(0.E0,0.E0,1.E0));
#4190=VECTOR('',#4189,7.5E1);
#4191=CARTESIAN_POINT('',(2.592127626369E2,1.802311153712E2,0.E0));
#4192=LINE('',#4191,#4190);
#4193=CARTESIAN_POINT('',(2.352127626369E2,1.982311153712E2,5.619576403560E1));
#4194=CARTESIAN_POINT('',(2.352127626369E2,1.982311153712E2,6.819576403560E1));
#4195=VERTEX_POINT('',#4193);
#4196=VERTEX_POINT('',#4194);
#4197=CARTESIAN_POINT('',(2.532127626369E2,1.982311153712E2,5.619576403560E1));
#4198=VERTEX_POINT('',#4197);
#4199=CARTESIAN_POINT('',(2.352127626369E2,1.867999773197E2,6.819576403560E1));
#4200=VERTEX_POINT('',#4199);
#4201=CARTESIAN_POINT('',(2.352127626369E2,1.867999773197E2,5.619576403560E1));
#4202=VERTEX_POINT('',#4201);
#4203=CARTESIAN_POINT('',(2.532127626369E2,1.982311153712E2,6.819576403560E1));
#4204=VERTEX_POINT('',#4203);
#4205=CARTESIAN_POINT('',(2.532127626369E2,1.867999773197E2,5.619576403560E1));
#4206=VERTEX_POINT('',#4205);
#4207=CARTESIAN_POINT('',(2.532127626369E2,1.867999773197E2,6.819576403560E1));
#4208=VERTEX_POINT('',#4207);
#4209=CARTESIAN_POINT('',(2.572127626369E2,1.982311153712E2,7.3E1));
#4210=CARTESIAN_POINT('',(2.312127626369E2,1.982311153712E2,7.3E1));
#4211=VERTEX_POINT('',#4209);
#4212=VERTEX_POINT('',#4210);
#4213=VERTEX_POINT('',#4090);
#4214=VERTEX_POINT('',#4099);
#4215=CARTESIAN_POINT('',(2.572127626369E2,1.982311153712E2,2.E0));
#4216=VERTEX_POINT('',#4215);
#4217=CARTESIAN_POINT('',(2.312127626369E2,1.982311153712E2,2.E0));
#4218=VERTEX_POINT('',#4217);
#4219=CARTESIAN_POINT('',(2.592127626369E2,1.962311153712E2,7.5E1));
#4220=VERTEX_POINT('',#4219);
#4221=VERTEX_POINT('',#4068);
#4222=CARTESIAN_POINT('',(2.292127626369E2,1.962311153712E2,0.E0));
#4223=VERTEX_POINT('',#4222);
#4224=CARTESIAN_POINT('',(2.292127626369E2,1.802311153712E2,7.5E1));
#4225=VERTEX_POINT('',#4224);
#4226=VERTEX_POINT('',#4133);
#4227=VERTEX_POINT('',#4140);
#4228=VERTEX_POINT('',#4159);
#4229=CARTESIAN_POINT('',(2.592127626369E2,1.802311153712E2,7.5E1));
#4230=VERTEX_POINT('',#4229);
#4231=CARTESIAN_POINT('',(2.292127626369E2,1.802311153712E2,0.E0));
#4232=VERTEX_POINT('',#4231);
#4233=CARTESIAN_POINT('',(2.592127626369E2,1.802311153712E2,0.E0));
#4234=VERTEX_POINT('',#4233);
#4235=CARTESIAN_POINT('',(2.352127626369E2,1.867999773197E2,6.819576403560E1));
#4236=DIRECTION('',(-1.E0,0.E0,0.E0));
#4237=DIRECTION('',(0.E0,0.E0,1.E0));
#4238=AXIS2_PLACEMENT_3D('',#4235,#4236,#4237);
#4239=PLANE('',#4238);
#4241=ORIENTED_EDGE('',*,*,#4240,.F.);
#4243=ORIENTED_EDGE('',*,*,#4242,.F.);
#4245=ORIENTED_EDGE('',*,*,#4244,.F.);
#4247=ORIENTED_EDGE('',*,*,#4246,.F.);
#4248=EDGE_LOOP('',(#4241,#4243,#4245,#4247));
#4249=FACE_OUTER_BOUND('',#4248,.F.);
#4250=ADVANCED_FACE('',(#4249),#4239,.F.);
#4251=CARTESIAN_POINT('',(2.592127626369E2,1.982311153712E2,0.E0));
#4252=DIRECTION('',(0.E0,1.E0,0.E0));
#4253=DIRECTION('',(0.E0,0.E0,1.E0));
#4254=AXIS2_PLACEMENT_3D('',#4251,#4252,#4253);
#4255=PLANE('',#4254);
#4257=ORIENTED_EDGE('',*,*,#4256,.T.);
#4259=ORIENTED_EDGE('',*,*,#4258,.T.);
#4261=ORIENTED_EDGE('',*,*,#4260,.T.);
#4263=ORIENTED_EDGE('',*,*,#4262,.T.);
#4264=EDGE_LOOP('',(#4257,#4259,#4261,#4263));
#4265=FACE_OUTER_BOUND('',#4264,.F.);
#4267=ORIENTED_EDGE('',*,*,#4266,.T.);
#4269=ORIENTED_EDGE('',*,*,#4268,.T.);
#4270=ORIENTED_EDGE('',*,*,#4240,.T.);
#4272=ORIENTED_EDGE('',*,*,#4271,.T.);
#4273=EDGE_LOOP('',(#4267,#4269,#4270,#4272));
#4274=FACE_BOUND('',#4273,.F.);
#4275=ADVANCED_FACE('',(#4265,#4274),#4255,.T.);
#4276=CARTESIAN_POINT('',(2.532127626369E2,1.867999773197E2,5.619576403560E1));
#4277=DIRECTION('',(1.E0,0.E0,0.E0));
#4278=DIRECTION('',(0.E0,0.E0,-1.E0));
#4279=AXIS2_PLACEMENT_3D('',#4276,#4277,#4278);
#4280=PLANE('',#4279);
#4281=ORIENTED_EDGE('',*,*,#4266,.F.);
#4283=ORIENTED_EDGE('',*,*,#4282,.F.);
#4285=ORIENTED_EDGE('',*,*,#4284,.F.);
#4287=ORIENTED_EDGE('',*,*,#4286,.T.);
#4288=EDGE_LOOP('',(#4281,#4283,#4285,#4287));
#4289=FACE_OUTER_BOUND('',#4288,.F.);
#4290=ADVANCED_FACE('',(#4289),#4280,.F.);
#4291=CARTESIAN_POINT('',(2.532127626369E2,1.867999773197E2,6.819576403560E1));
#4292=DIRECTION('',(0.E0,0.E0,1.E0));
#4293=DIRECTION('',(1.E0,0.E0,0.E0));
#4294=AXIS2_PLACEMENT_3D('',#4291,#4292,#4293);
#4295=PLANE('',#4294);
#4296=ORIENTED_EDGE('',*,*,#4271,.F.);
#4297=ORIENTED_EDGE('',*,*,#4246,.T.);
#4299=ORIENTED_EDGE('',*,*,#4298,.F.);
#4300=ORIENTED_EDGE('',*,*,#4282,.T.);
#4301=EDGE_LOOP('',(#4296,#4297,#4299,#4300));
#4302=FACE_OUTER_BOUND('',#4301,.F.);
#4303=ADVANCED_FACE('',(#4302),#4295,.F.);
#4304=CARTESIAN_POINT('',(2.442127626369E2,1.867999773197E2,6.219576403560E1));
#4305=DIRECTION('',(0.E0,-1.E0,0.E0));
#4306=DIRECTION('',(0.E0,0.E0,-1.E0));
#4307=AXIS2_PLACEMENT_3D('',#4304,#4305,#4306);
#4308=PLANE('',#4307);
#4310=ORIENTED_EDGE('',*,*,#4309,.T.);
#4311=ORIENTED_EDGE('',*,*,#4284,.T.);
#4312=ORIENTED_EDGE('',*,*,#4298,.T.);
#4313=ORIENTED_EDGE('',*,*,#4244,.T.);
#4314=EDGE_LOOP('',(#4310,#4311,#4312,#4313));
#4315=FACE_OUTER_BOUND('',#4314,.F.);
#4316=ADVANCED_FACE('',(#4315),#4308,.F.);
#4317=CARTESIAN_POINT('',(2.352127626369E2,1.867999773197E2,5.619576403560E1));
#4318=DIRECTION('',(0.E0,0.E0,-1.E0));
#4319=DIRECTION('',(-1.E0,0.E0,0.E0));
#4320=AXIS2_PLACEMENT_3D('',#4317,#4318,#4319);
#4321=PLANE('',#4320);
#4322=ORIENTED_EDGE('',*,*,#4268,.F.);
#4323=ORIENTED_EDGE('',*,*,#4286,.F.);
#4324=ORIENTED_EDGE('',*,*,#4309,.F.);
#4325=ORIENTED_EDGE('',*,*,#4242,.T.);
#4326=EDGE_LOOP('',(#4322,#4323,#4324,#4325));
#4327=FACE_OUTER_BOUND('',#4326,.F.);
#4328=ADVANCED_FACE('',(#4327),#4321,.F.);
#4329=CARTESIAN_POINT('',(2.592127626369E2,1.962311153712E2,7.3E1));
#4330=DIRECTION('',(-1.E0,0.E0,0.E0));
#4331=DIRECTION('',(0.E0,7.071067811865E-1,7.071067811865E-1));
#4332=AXIS2_PLACEMENT_3D('',#4329,#4330,#4331);
#4333=CYLINDRICAL_SURFACE('',#4332,2.E0);
#4335=ORIENTED_EDGE('',*,*,#4334,.F.);
#4336=ORIENTED_EDGE('',*,*,#4256,.F.);
#4338=ORIENTED_EDGE('',*,*,#4337,.F.);
#4340=ORIENTED_EDGE('',*,*,#4339,.F.);
#4342=ORIENTED_EDGE('',*,*,#4341,.F.);
#4344=ORIENTED_EDGE('',*,*,#4343,.F.);
#4345=EDGE_LOOP('',(#4335,#4336,#4338,#4340,#4342,#4344));
#4346=FACE_OUTER_BOUND('',#4345,.F.);
#4347=ADVANCED_FACE('',(#4346),#4333,.T.);
#4348=CARTESIAN_POINT('',(2.312127626369E2,1.962311153712E2,0.E0));
#4349=DIRECTION('',(0.E0,0.E0,1.E0));
#4350=DIRECTION('',(-7.071067811865E-1,7.071067811865E-1,0.E0));
#4351=AXIS2_PLACEMENT_3D('',#4348,#4349,#4350);
#4352=CYLINDRICAL_SURFACE('',#4351,2.E0);
#4353=ORIENTED_EDGE('',*,*,#4343,.T.);
#4355=ORIENTED_EDGE('',*,*,#4354,.F.);
#4357=ORIENTED_EDGE('',*,*,#4356,.T.);
#4359=ORIENTED_EDGE('',*,*,#4358,.T.);
#4360=ORIENTED_EDGE('',*,*,#4258,.F.);
#4361=ORIENTED_EDGE('',*,*,#4334,.T.);
#4362=EDGE_LOOP('',(#4353,#4355,#4357,#4359,#4360,#4361));
#4363=FACE_OUTER_BOUND('',#4362,.F.);
#4364=ADVANCED_FACE('',(#4363),#4352,.T.);
#4365=CARTESIAN_POINT('',(2.292127626369E2,1.802311153712E2,0.E0));
#4366=DIRECTION('',(1.E0,0.E0,0.E0));
#4367=DIRECTION('',(0.E0,0.E0,-1.E0));
#4368=AXIS2_PLACEMENT_3D('',#4365,#4366,#4367);
#4369=PLANE('',#4368);
#4370=ORIENTED_EDGE('',*,*,#4354,.T.);
#4372=ORIENTED_EDGE('',*,*,#4371,.F.);
#4374=ORIENTED_EDGE('',*,*,#4373,.F.);
#4376=ORIENTED_EDGE('',*,*,#4375,.F.);
#4377=EDGE_LOOP('',(#4370,#4372,#4374,#4376));
#4378=FACE_OUTER_BOUND('',#4377,.F.);
#4379=ADVANCED_FACE('',(#4378),#4369,.F.);
#4380=CARTESIAN_POINT('',(2.592127626369E2,1.982311153712E2,7.5E1));
#4381=DIRECTION('',(0.E0,0.E0,1.E0));
#4382=DIRECTION('',(1.E0,0.E0,0.E0));
#4383=AXIS2_PLACEMENT_3D('',#4380,#4381,#4382);
#4384=PLANE('',#4383);
#4385=ORIENTED_EDGE('',*,*,#4341,.T.);
#4387=ORIENTED_EDGE('',*,*,#4386,.F.);
#4389=ORIENTED_EDGE('',*,*,#4388,.F.);
#4390=ORIENTED_EDGE('',*,*,#4371,.T.);
#4391=EDGE_LOOP('',(#4385,#4387,#4389,#4390));
#4392=FACE_OUTER_BOUND('',#4391,.F.);
#4393=ADVANCED_FACE('',(#4392),#4384,.T.);
#4394=CARTESIAN_POINT('',(2.592127626369E2,1.892311153712E2,3.75E1));
#4395=DIRECTION('',(1.E0,0.E0,0.E0));
#4396=DIRECTION('',(0.E0,0.E0,-1.E0));
#4397=AXIS2_PLACEMENT_3D('',#4394,#4395,#4396);
#4398=PLANE('',#4397);
#4400=ORIENTED_EDGE('',*,*,#4399,.T.);
#4402=ORIENTED_EDGE('',*,*,#4401,.T.);
#4404=ORIENTED_EDGE('',*,*,#4403,.T.);
#4405=ORIENTED_EDGE('',*,*,#4386,.T.);
#4406=EDGE_LOOP('',(#4400,#4402,#4404,#4405));
#4407=FACE_OUTER_BOUND('',#4406,.F.);
#4408=ADVANCED_FACE('',(#4407),#4398,.T.);
#4409=CARTESIAN_POINT('',(2.572127626369E2,1.962311153712E2,1.875E1));
#4410=DIRECTION('',(0.E0,0.E0,-1.E0));
#4411=DIRECTION('',(7.071067811865E-1,7.071067811865E-1,0.E0));
#4412=AXIS2_PLACEMENT_3D('',#4409,#4410,#4411);
#4413=CYLINDRICAL_SURFACE('',#4412,2.E0);
#4414=ORIENTED_EDGE('',*,*,#4337,.T.);
#4415=ORIENTED_EDGE('',*,*,#4262,.F.);
#4417=ORIENTED_EDGE('',*,*,#4416,.F.);
#4419=ORIENTED_EDGE('',*,*,#4418,.F.);
#4420=ORIENTED_EDGE('',*,*,#4399,.F.);
#4421=ORIENTED_EDGE('',*,*,#4339,.T.);
#4422=EDGE_LOOP('',(#4414,#4415,#4417,#4419,#4420,#4421));
#4423=FACE_OUTER_BOUND('',#4422,.F.);
#4424=ADVANCED_FACE('',(#4423),#4413,.T.);
#4425=CARTESIAN_POINT('',(2.592127626369E2,1.962311153712E2,2.E0));
#4426=DIRECTION('',(-1.E0,0.E0,0.E0));
#4427=DIRECTION('',(0.E0,7.071067811865E-1,-7.071067811865E-1));
#4428=AXIS2_PLACEMENT_3D('',#4425,#4426,#4427);
#4429=CYLINDRICAL_SURFACE('',#4428,2.E0);
#4430=ORIENTED_EDGE('',*,*,#4416,.T.);
#4431=ORIENTED_EDGE('',*,*,#4260,.F.);
#4432=ORIENTED_EDGE('',*,*,#4358,.F.);
#4433=ORIENTED_EDGE('',*,*,#4356,.F.);
#4435=ORIENTED_EDGE('',*,*,#4434,.F.);
#4436=ORIENTED_EDGE('',*,*,#4418,.T.);
#4437=EDGE_LOOP('',(#4430,#4431,#4432,#4433,#4435,#4436));
#4438=FACE_OUTER_BOUND('',#4437,.F.);
#4439=ADVANCED_FACE('',(#4438),#4429,.T.);
#4440=CARTESIAN_POINT('',(2.592127626369E2,1.802311153712E2,0.E0));
#4441=DIRECTION('',(0.E0,0.E0,-1.E0));
#4442=DIRECTION('',(-1.E0,0.E0,0.E0));
#4443=AXIS2_PLACEMENT_3D('',#4440,#4441,#4442);
#4444=PLANE('',#4443);
#4445=ORIENTED_EDGE('',*,*,#4434,.T.);
#4446=ORIENTED_EDGE('',*,*,#4375,.T.);
#4448=ORIENTED_EDGE('',*,*,#4447,.F.);
#4449=ORIENTED_EDGE('',*,*,#4401,.F.);
#4450=EDGE_LOOP('',(#4445,#4446,#4448,#4449));
#4451=FACE_OUTER_BOUND('',#4450,.F.);
#4452=ADVANCED_FACE('',(#4451),#4444,.T.);
#4453=CARTESIAN_POINT('',(2.592127626369E2,1.802311153712E2,7.5E1));
#4454=DIRECTION('',(0.E0,-1.E0,0.E0));
#4455=DIRECTION('',(0.E0,0.E0,-1.E0));
#4456=AXIS2_PLACEMENT_3D('',#4453,#4454,#4455);
#4457=PLANE('',#4456);
#4458=ORIENTED_EDGE('',*,*,#4373,.T.);
#4459=ORIENTED_EDGE('',*,*,#4388,.T.);
#4460=ORIENTED_EDGE('',*,*,#4403,.F.);
#4461=ORIENTED_EDGE('',*,*,#4447,.T.);
#4462=EDGE_LOOP('',(#4458,#4459,#4460,#4461));
#4463=FACE_OUTER_BOUND('',#4462,.F.);
#4464=ADVANCED_FACE('',(#4463),#4457,.T.);
#4465=CLOSED_SHELL('',(#4250,#4275,#4290,#4303,#4316,#4328,#4347,#4364,#4379,
#4393,#4408,#4424,#4439,#4452,#4464));
#4466=MANIFOLD_SOLID_BREP('',#4465);
#4468=DIMENSIONAL_EXPONENTS(0.E0,0.E0,0.E0,0.E0,0.E0,0.E0,0.E0);
#4470=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(1.745329251994E-2),
#4469);
#4471=(CONVERSION_BASED_UNIT('DEGREE',#4470)NAMED_UNIT(*)PLANE_ANGLE_UNIT());
#4473=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(8.275537499739E-3),#4467,
'closure',
'Maximum model space distance between geometric entities at asserted connectivities');
#4474=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((
#4473))GLOBAL_UNIT_ASSIGNED_CONTEXT((#4467,#4471,#4472))REPRESENTATION_CONTEXT(
'ID9','3'));
#4475=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#4476=DIRECTION('',(0.E0,0.E0,1.E0));
#4477=DIRECTION('',(1.E0,0.E0,0.E0));
#4480=DESIGN_CONTEXT('',#863,'design');
#4481=MECHANICAL_CONTEXT('',#863,'mechanical');
#4482=PRODUCT('LAD4-3DSOLID_5996','LAD4-3DSOLID_5996','NOT SPECIFIED',(#4481));
#4483=PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE('1','LAST_VERSION',
#4482,.MADE.);
#4489=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#4490=DIRECTION('',(0.E0,0.E0,1.E0));
#4491=DIRECTION('',(1.E0,0.E0,0.E0));
#4492=AXIS2_PLACEMENT_3D('',#4489,#4490,#4491);
#4493=ITEM_DEFINED_TRANSFORMATION('','',#4478,#4492);
#4494=(REPRESENTATION_RELATIONSHIP('','',#4479,#874)REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#4493)SHAPE_REPRESENTATION_RELATIONSHIP());
#4495=CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#4494,#4488);
#4496=DIRECTION('',(0.E0,0.E0,-1.E0));
#4497=VECTOR('',#4496,1.E1);
#4498=CARTESIAN_POINT('',(2.528757813082E2,1.988181658616E2,6.719576403560E1));
#4499=LINE('',#4498,#4497);
#4500=DIRECTION('',(0.E0,0.E0,1.E0));
#4501=VECTOR('',#4500,1.E1);
#4502=CARTESIAN_POINT('',(2.371772192407E2,2.019093062680E2,5.719576403560E1));
#4503=LINE('',#4502,#4501);
#4504=DIRECTION('',(0.E0,0.E0,-1.E0));
#4505=VECTOR('',#4504,1.E1);
#4506=CARTESIAN_POINT('',(2.515655404505E2,1.921640205545E2,6.719576403560E1));
#4507=LINE('',#4506,#4505);
#4508=DIRECTION('',(-1.931962754014E-1,-9.811601292200E-1,0.E0));
#4509=VECTOR('',#4508,6.781915722932E0);
#4510=CARTESIAN_POINT('',(2.528757813082E2,1.988181658616E2,6.719576403560E1));
#4511=LINE('',#4510,#4509);
#4512=CARTESIAN_POINT('',(2.495705374168E2,2.234409308009E2,5.719576403560E1));
#4513=DIRECTION('',(0.E0,0.E0,1.E0));
#4514=DIRECTION('',(-4.988532600830E-1,-8.666864628599E-1,0.E0));
#4515=AXIS2_PLACEMENT_3D('',#4512,#4513,#4514);
#4517=DIRECTION('',(-9.811601292200E-1,1.931962754014E-1,0.E0));
#4518=VECTOR('',#4517,1.6E1);
#4519=CARTESIAN_POINT('',(2.515655404505E2,1.921640205545E2,5.719576403560E1));
#4520=LINE('',#4519,#4518);
#4521=DIRECTION('',(-1.931962754014E-1,-9.811601292200E-1,0.E0));
#4522=VECTOR('',#4521,6.781915722932E0);
#4523=CARTESIAN_POINT('',(2.528757813082E2,1.988181658616E2,5.719576403560E1));
#4524=LINE('',#4523,#4522);
#4525=DIRECTION('',(1.931962754014E-1,9.811601292200E-1,0.E0));
#4526=VECTOR('',#4525,6.781915722932E0);
#4527=CARTESIAN_POINT('',(2.358669783829E2,1.952551609609E2,6.719576403560E1));
#4528=LINE('',#4527,#4526);
#4529=DIRECTION('',(0.E0,0.E0,1.E0));
#4530=VECTOR('',#4529,1.E1);
#4531=CARTESIAN_POINT('',(2.358669783829E2,1.952551609609E2,5.719576403560E1));
#4532=LINE('',#4531,#4530);
#4533=DIRECTION('',(-1.931962754014E-1,-9.811601292200E-1,0.E0));
#4534=VECTOR('',#4533,6.781915722932E0);
#4535=CARTESIAN_POINT('',(2.371772192407E2,2.019093062680E2,5.719576403560E1));
#4536=LINE('',#4535,#4534);
#4537=CARTESIAN_POINT('',(2.495705374168E2,2.234409308009E2,6.719576403560E1));
#4538=DIRECTION('',(0.E0,0.E0,-1.E0));
#4539=DIRECTION('',(1.330419882066E-1,-9.911104022126E-1,0.E0));
#4540=AXIS2_PLACEMENT_3D('',#4537,#4538,#4539);
#4542=DIRECTION('',(9.811601292200E-1,-1.931962754014E-1,0.E0));
#4543=VECTOR('',#4542,1.6E1);
#4544=CARTESIAN_POINT('',(2.358669783829E2,1.952551609609E2,6.719576403560E1));
#4545=LINE('',#4544,#4543);
#4546=CARTESIAN_POINT('',(2.528757813082E2,1.988181658616E2,6.719576403560E1));
#4547=CARTESIAN_POINT('',(2.528757813082E2,1.988181658616E2,5.719576403560E1));
#4548=VERTEX_POINT('',#4546);
#4549=VERTEX_POINT('',#4547);
#4550=CARTESIAN_POINT('',(2.371772192407E2,2.019093062680E2,5.719576403560E1));
#4551=CARTESIAN_POINT('',(2.371772192407E2,2.019093062680E2,6.719576403560E1));
#4552=VERTEX_POINT('',#4550);
#4553=VERTEX_POINT('',#4551);
#4554=CARTESIAN_POINT('',(2.358669783829E2,1.952551609609E2,5.719576403560E1));
#4555=VERTEX_POINT('',#4554);
#4556=CARTESIAN_POINT('',(2.358669783829E2,1.952551609609E2,6.719576403560E1));
#4557=VERTEX_POINT('',#4556);
#4558=CARTESIAN_POINT('',(2.515655404505E2,1.921640205545E2,6.719576403560E1));
#4559=VERTEX_POINT('',#4558);
#4560=CARTESIAN_POINT('',(2.515655404505E2,1.921640205545E2,5.719576403560E1));
#4561=VERTEX_POINT('',#4560);
#4562=CARTESIAN_POINT('',(2.495705374168E2,2.234409308009E2,8.062918134129E1));
#4563=DIRECTION('',(0.E0,0.E0,-1.E0));
#4564=DIRECTION('',(-9.811601292200E-1,1.931962754014E-1,0.E0));
#4565=AXIS2_PLACEMENT_3D('',#4562,#4563,#4564);
#4566=CYLINDRICAL_SURFACE('',#4565,2.484361468141E1);
#4568=ORIENTED_EDGE('',*,*,#4567,.F.);
#4570=ORIENTED_EDGE('',*,*,#4569,.T.);
#4572=ORIENTED_EDGE('',*,*,#4571,.F.);
#4574=ORIENTED_EDGE('',*,*,#4573,.T.);
#4575=EDGE_LOOP('',(#4568,#4570,#4572,#4574));
#4576=FACE_OUTER_BOUND('',#4575,.F.);
#4577=ADVANCED_FACE('',(#4576),#4566,.F.);
#4578=CARTESIAN_POINT('',(2.515655404505E2,1.921640205545E2,5.719576403560E1));
#4579=DIRECTION('',(9.811601292200E-1,-1.931962754014E-1,0.E0));
#4580=DIRECTION('',(0.E0,0.E0,-1.E0));
#4581=AXIS2_PLACEMENT_3D('',#4578,#4579,#4580);
#4582=PLANE('',#4581);
#4583=ORIENTED_EDGE('',*,*,#4567,.T.);
#4585=ORIENTED_EDGE('',*,*,#4584,.T.);
#4587=ORIENTED_EDGE('',*,*,#4586,.F.);
#4589=ORIENTED_EDGE('',*,*,#4588,.F.);
#4590=EDGE_LOOP('',(#4583,#4585,#4587,#4589));
#4591=FACE_OUTER_BOUND('',#4590,.F.);
#4592=ADVANCED_FACE('',(#4591),#4582,.T.);
#4593=CARTESIAN_POINT('',(2.358669783829E2,1.952551609609E2,5.719576403560E1));
#4594=DIRECTION('',(0.E0,0.E0,-1.E0));
#4595=DIRECTION('',(-9.811601292200E-1,1.931962754014E-1,0.E0));
#4596=AXIS2_PLACEMENT_3D('',#4593,#4594,#4595);
#4597=PLANE('',#4596);
#4598=ORIENTED_EDGE('',*,*,#4573,.F.);
#4600=ORIENTED_EDGE('',*,*,#4599,.T.);
#4602=ORIENTED_EDGE('',*,*,#4601,.F.);
#4603=ORIENTED_EDGE('',*,*,#4584,.F.);
#4604=EDGE_LOOP('',(#4598,#4600,#4602,#4603));
#4605=FACE_OUTER_BOUND('',#4604,.F.);
#4606=ADVANCED_FACE('',(#4605),#4597,.T.);
#4607=CARTESIAN_POINT('',(2.358669783829E2,1.952551609609E2,6.719576403560E1));
#4608=DIRECTION('',(-9.811601292200E-1,1.931962754014E-1,0.E0));
#4609=DIRECTION('',(0.E0,0.E0,1.E0));
#4610=AXIS2_PLACEMENT_3D('',#4607,#4608,#4609);
#4611=PLANE('',#4610);
#4612=ORIENTED_EDGE('',*,*,#4571,.T.);
#4614=ORIENTED_EDGE('',*,*,#4613,.F.);
#4616=ORIENTED_EDGE('',*,*,#4615,.F.);
#4617=ORIENTED_EDGE('',*,*,#4599,.F.);
#4618=EDGE_LOOP('',(#4612,#4614,#4616,#4617));
#4619=FACE_OUTER_BOUND('',#4618,.F.);
#4620=ADVANCED_FACE('',(#4619),#4611,.T.);
#4621=CARTESIAN_POINT('',(2.515655404505E2,1.921640205545E2,6.719576403560E1));
#4622=DIRECTION('',(0.E0,0.E0,1.E0));
#4623=DIRECTION('',(9.811601292200E-1,-1.931962754014E-1,0.E0));
#4624=AXIS2_PLACEMENT_3D('',#4621,#4622,#4623);
#4625=PLANE('',#4624);
#4626=ORIENTED_EDGE('',*,*,#4569,.F.);
#4627=ORIENTED_EDGE('',*,*,#4588,.T.);
#4629=ORIENTED_EDGE('',*,*,#4628,.F.);
#4630=ORIENTED_EDGE('',*,*,#4613,.T.);
#4631=EDGE_LOOP('',(#4626,#4627,#4629,#4630));
#4632=FACE_OUTER_BOUND('',#4631,.F.);
#4633=ADVANCED_FACE('',(#4632),#4625,.T.);
#4634=CARTESIAN_POINT('',(2.437162594167E2,1.937095907577E2,6.219576403560E1));
#4635=DIRECTION('',(-1.931962754014E-1,-9.811601292200E-1,0.E0));
#4636=DIRECTION('',(0.E0,0.E0,-1.E0));
#4637=AXIS2_PLACEMENT_3D('',#4634,#4635,#4636);
#4638=PLANE('',#4637);
#4639=ORIENTED_EDGE('',*,*,#4601,.T.);
#4640=ORIENTED_EDGE('',*,*,#4615,.T.);
#4641=ORIENTED_EDGE('',*,*,#4628,.T.);
#4642=ORIENTED_EDGE('',*,*,#4586,.T.);
#4643=EDGE_LOOP('',(#4639,#4640,#4641,#4642));
#4644=FACE_OUTER_BOUND('',#4643,.F.);
#4645=ADVANCED_FACE('',(#4644),#4638,.T.);
#4646=CLOSED_SHELL('',(#4577,#4592,#4606,#4620,#4633,#4645));
#4647=MANIFOLD_SOLID_BREP('',#4646);
#4649=DIMENSIONAL_EXPONENTS(0.E0,0.E0,0.E0,0.E0,0.E0,0.E0,0.E0);
#4651=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(1.745329251994E-2),
#4650);
#4652=(CONVERSION_BASED_UNIT('DEGREE',#4651)NAMED_UNIT(*)PLANE_ANGLE_UNIT());
#4654=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(2.200525459443E-3),#4648,
'closure',
'Maximum model space distance between geometric entities at asserted connectivities');
#4655=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((
#4654))GLOBAL_UNIT_ASSIGNED_CONTEXT((#4648,#4652,#4653))REPRESENTATION_CONTEXT(
'ID10','3'));
#4656=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#4657=DIRECTION('',(0.E0,0.E0,1.E0));
#4658=DIRECTION('',(1.E0,0.E0,0.E0));
#4661=MECHANICAL_CONTEXT('',#863,'mechanical');
#4662=PRODUCT('LAD4-3DSOLID_6002','LAD4-3DSOLID_6002','NOT SPECIFIED',(#4661));
#4663=PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE('1','LAST_VERSION',
#4662,.MADE.);
#4669=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#4670=DIRECTION('',(0.E0,0.E0,1.E0));
#4671=DIRECTION('',(1.E0,0.E0,0.E0));
#4672=AXIS2_PLACEMENT_3D('',#4669,#4670,#4671);
#4673=ITEM_DEFINED_TRANSFORMATION('','',#4659,#4672);
#4674=(REPRESENTATION_RELATIONSHIP('','',#4660,#874)REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#4673)SHAPE_REPRESENTATION_RELATIONSHIP());
#4675=CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#4674,#4668);
#4677=DIMENSIONAL_EXPONENTS(0.E0,0.E0,0.E0,0.E0,0.E0,0.E0,0.E0);
#4679=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(1.745329251994E-2),
#4678);
#4680=(CONVERSION_BASED_UNIT('DEGREE',#4679)NAMED_UNIT(*)PLANE_ANGLE_UNIT());
#4682=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.474094768212E-2),#4676,
'closure',
'Maximum model space distance between geometric entities at asserted connectivities');
#4683=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((
#4682))GLOBAL_UNIT_ASSIGNED_CONTEXT((#4676,#4680,#4681))REPRESENTATION_CONTEXT(
'ID11','3'));
#4684=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#4685=DIRECTION('',(0.E0,0.E0,1.E0));
#4686=DIRECTION('',(1.E0,0.E0,0.E0));
#4688=DESIGN_CONTEXT('',#863,'design');
#4689=MECHANICAL_CONTEXT('',#863,'mechanical');
#4690=PRODUCT('LAD4_ASM','LAD4_ASM','NOT SPECIFIED',(#4689));
#4691=PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE('1','LAST_VERSION',
#4690,.MADE.);
#4693=PRODUCT_CATEGORY('part','');
#4694=PRODUCT_RELATED_PRODUCT_CATEGORY('assembly','',(#4690));
#4695=PRODUCT_CATEGORY_RELATIONSHIP('','',#4693,#4694);
#4696=PRODUCT_CATEGORY('part','');
#4697=PRODUCT_RELATED_PRODUCT_CATEGORY('detail','',(#867,#1434,#2229,#2561,
#2894,#3226,#3559,#3995,#4482,#4662));
#4698=PRODUCT_CATEGORY_RELATIONSHIP('','',#4696,#4697);
#4699=SECURITY_CLASSIFICATION_LEVEL('unclassified');
#4700=SECURITY_CLASSIFICATION('','',#4699);
#4701=CC_DESIGN_SECURITY_CLASSIFICATION(#4700,(#868,#1435,#2230,#2562,#2895,
#3227,#3560,#3996,#4483,#4663,#4691,#875,#1439,#2234,#2566,#2899,#3231,#3564,
#4000,#4487,#4667));
#4702=APPROVAL_STATUS('approved');
#4703=APPROVAL(#4702,'');
#4704=CC_DESIGN_APPROVAL(#4703,(#4700,#868,#1435,#2230,#2562,#2895,#3227,#3560,
#3996,#4483,#4663,#4691,#869,#1436,#2231,#2563,#2896,#3228,#3561,#3997,#4484,
#4664,#4692));
#4705=CALENDAR_DATE(114,26,2);
#4706=COORDINATED_UNIVERSAL_TIME_OFFSET(1,0,.AHEAD.);
#4707=LOCAL_TIME(14,43,2.2E1,#4706);
#4708=DATE_AND_TIME(#4705,#4707);
#4709=APPROVAL_DATE_TIME(#4708,#4703);
#4710=DATE_TIME_ROLE('creation_date');
#4711=CC_DESIGN_DATE_AND_TIME_ASSIGNMENT(#4708,#4710,(#869,#1436,#2231,#2563,
#2896,#3228,#3561,#3997,#4484,#4664,#4692));
#4712=DATE_TIME_ROLE('classification_date');
#4713=CC_DESIGN_DATE_AND_TIME_ASSIGNMENT(#4708,#4712,(#4700));
#4714=PERSON('UNSPECIFIED','UNSPECIFIED',$,$,$,$);
#4715=ORGANIZATION('UNSPECIFIED','UNSPECIFIED','UNSPECIFIED');
#4716=PERSON_AND_ORGANIZATION(#4714,#4715);
#4717=APPROVAL_ROLE('approver');
#4718=APPROVAL_PERSON_ORGANIZATION(#4716,#4703,#4717);
#4719=PERSON_AND_ORGANIZATION_ROLE('creator');
#4720=CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT(#4716,#4719,(#868,#1435,
#2230,#2562,#2895,#3227,#3560,#3996,#4483,#4663,#4691,#869,#1436,#2231,#2563,
#2896,#3228,#3561,#3997,#4484,#4664,#4692));
#4721=PERSON_AND_ORGANIZATION_ROLE('design_supplier');
#4722=CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT(#4716,#4721,(#868,#1435,
#2230,#2562,#2895,#3227,#3560,#3996,#4483,#4663,#4691));
#4723=PERSON_AND_ORGANIZATION_ROLE('classification_officer');
#4724=CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT(#4716,#4723,(#4700));
#4725=PERSON_AND_ORGANIZATION_ROLE('design_owner');
#4726=CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT(#4716,#4725,(#4690,#867,
#1434,#2229,#2561,#2894,#3226,#3559,#3995,#4482,#4662));
#11=B_SPLINE_CURVE_WITH_KNOTS('',3,(#5,#6,#7,#8,#9,#10),.UNSPECIFIED.,.F.,.F.,
(4,1,1,4),(0.E0,3.333333333333E-1,6.666666666667E-1,1.E0),.UNSPECIFIED.);
#26=B_SPLINE_CURVE_WITH_KNOTS('',3,(#20,#21,#22,#23,#24,#25),.UNSPECIFIED.,.F.,
.F.,(4,1,1,4),(0.E0,3.333333333333E-1,6.666666666667E-1,1.E0),.UNSPECIFIED.);
#35=CIRCLE('',#34,9.499999999994E0);
#40=CIRCLE('',#39,9.499999999994E0);
#49=CIRCLE('',#48,5.5E0);
#54=CIRCLE('',#53,5.5E0);
#59=CIRCLE('',#58,5.8E0);
#64=CIRCLE('',#63,5.8E0);
#73=CIRCLE('',#72,9.199999999994E0);
#78=CIRCLE('',#77,9.199999999994E0);
#85=B_SPLINE_CURVE_WITH_KNOTS('',3,(#79,#80,#81,#82,#83,#84),.UNSPECIFIED.,.F.,
.F.,(4,1,1,4),(0.E0,3.333333333333E-1,6.666666666667E-1,1.E0),.UNSPECIFIED.);
#96=B_SPLINE_CURVE_WITH_KNOTS('',3,(#90,#91,#92,#93,#94,#95),.UNSPECIFIED.,.F.,
.F.,(4,1,1,4),(0.E0,3.333333333333E-1,6.666666666667E-1,1.E0),.UNSPECIFIED.);
#103=B_SPLINE_CURVE_WITH_KNOTS('',3,(#97,#98,#99,#100,#101,#102),.UNSPECIFIED.,
.F.,.F.,(4,1,1,4),(0.E0,3.333333333333E-1,6.666666666667E-1,1.E0),
.UNSPECIFIED.);
#114=B_SPLINE_CURVE_WITH_KNOTS('',3,(#108,#109,#110,#111,#112,#113),
.UNSPECIFIED.,.F.,.F.,(4,1,1,4),(0.E0,3.333333333333E-1,6.666666666667E-1,1.E0),
.UNSPECIFIED.);
#125=B_SPLINE_CURVE_WITH_KNOTS('',3,(#119,#120,#121,#122,#123,#124),
.UNSPECIFIED.,.F.,.F.,(4,1,1,4),(0.E0,3.333333333333E-1,6.666666666667E-1,1.E0),
.UNSPECIFIED.);
#132=B_SPLINE_CURVE_WITH_KNOTS('',3,(#126,#127,#128,#129,#130,#131),
.UNSPECIFIED.,.F.,.F.,(4,1,1,4),(0.E0,3.333333333333E-1,6.666666666667E-1,1.E0),
.UNSPECIFIED.);
#141=CIRCLE('',#140,9.199999999994E0);
#146=CIRCLE('',#145,9.199999999994E0);
#155=CIRCLE('',#154,5.8E0);
#160=CIRCLE('',#159,5.8E0);
#165=CIRCLE('',#164,5.5E0);
#170=CIRCLE('',#169,5.5E0);
#179=CIRCLE('',#178,9.499999999994E0);
#184=CIRCLE('',#183,9.499999999994E0);
#197=CIRCLE('',#196,2.75E0);
#202=CIRCLE('',#201,2.75E0);
#207=CIRCLE('',#206,2.75E0);
#212=CIRCLE('',#211,2.75E0);
#217=CIRCLE('',#216,2.75E0);
#222=CIRCLE('',#221,2.75E0);
#227=CIRCLE('',#226,2.75E0);
#232=CIRCLE('',#231,2.75E0);
#253=CIRCLE('',#252,2.75E0);
#258=CIRCLE('',#257,2.75E0);
#263=CIRCLE('',#262,2.75E0);
#268=CIRCLE('',#267,2.75E0);
#273=CIRCLE('',#272,2.75E0);
#278=CIRCLE('',#277,2.75E0);
#283=CIRCLE('',#282,2.75E0);
#288=CIRCLE('',#287,2.75E0);
#445=EDGE_CURVE('',#345,#346,#26,.T.);
#447=EDGE_CURVE('',#351,#346,#4,.T.);
#449=EDGE_CURVE('',#351,#358,#85,.T.);
#451=EDGE_CURVE('',#358,#349,#114,.T.);
#453=EDGE_CURVE('',#349,#347,#30,.T.);
#455=EDGE_CURVE('',#347,#345,#11,.T.);
#466=EDGE_CURVE('',#347,#355,#78,.T.);
#468=EDGE_CURVE('',#355,#357,#73,.T.);
#470=EDGE_CURVE('',#365,#357,#15,.T.);
#472=EDGE_CURVE('',#365,#371,#146,.T.);
#474=EDGE_CURVE('',#371,#363,#141,.T.);
#476=EDGE_CURVE('',#363,#362,#132,.T.);
#478=EDGE_CURVE('',#362,#353,#125,.T.);
#480=EDGE_CURVE('',#346,#353,#19,.T.);
#492=EDGE_CURVE('',#369,#349,#35,.T.);
#494=EDGE_CURVE('',#368,#369,#40,.T.);
#496=EDGE_CURVE('',#375,#368,#44,.T.);
#498=EDGE_CURVE('',#389,#375,#49,.T.);
#500=EDGE_CURVE('',#388,#389,#54,.T.);
#502=EDGE_CURVE('',#388,#393,#300,.T.);
#504=EDGE_CURVE('',#393,#391,#336,.T.);
#506=EDGE_CURVE('',#391,#385,#240,.T.);
#508=EDGE_CURVE('',#383,#385,#59,.T.);
#510=EDGE_CURVE('',#373,#383,#64,.T.);
#512=EDGE_CURVE('',#357,#373,#68,.T.);
#525=EDGE_CURVE('',#360,#351,#89,.T.);
#527=EDGE_CURVE('',#359,#360,#96,.T.);
#529=EDGE_CURVE('',#361,#359,#103,.T.);
#531=EDGE_CURVE('',#361,#377,#184,.T.);
#533=EDGE_CURVE('',#377,#379,#179,.T.);
#535=EDGE_CURVE('',#368,#379,#107,.T.);
#550=EDGE_CURVE('',#353,#360,#118,.T.);
#565=EDGE_CURVE('',#363,#361,#136,.T.);
#579=EDGE_CURVE('',#381,#365,#150,.T.);
#581=EDGE_CURVE('',#399,#381,#155,.T.);
#583=EDGE_CURVE('',#398,#399,#160,.T.);
#585=EDGE_CURVE('',#398,#405,#236,.T.);
#587=EDGE_CURVE('',#405,#407,#328,.T.);
#589=EDGE_CURVE('',#407,#401,#292,.T.);
#591=EDGE_CURVE('',#403,#401,#165,.T.);
#593=EDGE_CURVE('',#395,#403,#170,.T.);
#595=EDGE_CURVE('',#379,#395,#174,.T.);
#610=EDGE_CURVE('',#373,#381,#188,.T.);
#624=EDGE_CURVE('',#398,#385,#192,.T.);
#638=EDGE_CURVE('',#391,#405,#332,.T.);
#642=EDGE_CURVE('',#419,#423,#207,.T.);
#644=EDGE_CURVE('',#423,#419,#212,.T.);
#648=EDGE_CURVE('',#427,#431,#217,.T.);
#650=EDGE_CURVE('',#431,#427,#222,.T.);
#654=EDGE_CURVE('',#435,#439,#227,.T.);
#656=EDGE_CURVE('',#439,#435,#232,.T.);
#660=EDGE_CURVE('',#411,#415,#197,.T.);
#662=EDGE_CURVE('',#415,#411,#202,.T.);
#672=EDGE_CURVE('',#414,#410,#258,.T.);
#674=EDGE_CURVE('',#410,#411,#244,.T.);
#677=EDGE_CURVE('',#414,#415,#248,.T.);
#688=EDGE_CURVE('',#393,#407,#296,.T.);
#691=EDGE_CURVE('',#388,#401,#340,.T.);
#695=EDGE_CURVE('',#418,#422,#263,.T.);
#697=EDGE_CURVE('',#422,#418,#268,.T.);
#701=EDGE_CURVE('',#426,#430,#273,.T.);
#703=EDGE_CURVE('',#430,#426,#278,.T.);
#707=EDGE_CURVE('',#434,#438,#283,.T.);
#709=EDGE_CURVE('',#438,#434,#288,.T.);
#713=EDGE_CURVE('',#410,#414,#253,.T.);
#737=EDGE_CURVE('',#422,#423,#308,.T.);
#740=EDGE_CURVE('',#418,#419,#304,.T.);
#763=EDGE_CURVE('',#430,#431,#316,.T.);
#766=EDGE_CURVE('',#426,#427,#312,.T.);
#789=EDGE_CURVE('',#438,#439,#324,.T.);
#792=EDGE_CURVE('',#434,#435,#320,.T.);
#830=EDGE_CURVE('',#395,#375,#344,.T.);
#850=(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(.MILLI.,.METRE.));
#852=(NAMED_UNIT(*)PLANE_ANGLE_UNIT()SI_UNIT($,.RADIAN.));
#855=(NAMED_UNIT(*)SI_UNIT($,.STERADIAN.)SOLID_ANGLE_UNIT());
#861=AXIS2_PLACEMENT_3D('',#858,#859,#860);
#862=ADVANCED_BREP_SHAPE_REPRESENTATION('',(#861,#849),#857);
#869=PRODUCT_DEFINITION('design','',#868,#865);
#870=PRODUCT_DEFINITION_SHAPE('','SHAPE FOR LAD4-3DSOLID_5903.',#869);
#871=SHAPE_DEFINITION_REPRESENTATION(#870,#862);
#872=SHAPE_DEFINITION_REPRESENTATION(#873,#874);
#873=PRODUCT_DEFINITION_SHAPE('','SHAPE FOR LAD4_ASM.',#4692);
#874=SHAPE_REPRESENTATION('',(#880,#1444,#2239,#2571,#2904,#3236,#3569,#4005,
#4492,#4672,#4687),#4683);
#875=NEXT_ASSEMBLY_USAGE_OCCURRENCE('429','Next assembly relationship',
'LAD4-3DSOLID_5903',#4692,#869,$);
#876=PRODUCT_DEFINITION_SHAPE('Placement #429',
'Placement of LAD4-3DSOLID_5903 with respect to LAD4_ASM',#875);
#888=CIRCLE('',#887,2.E0);
#893=CIRCLE('',#892,2.E0);
#898=CIRCLE('',#897,2.E0);
#903=CIRCLE('',#902,2.E0);
#908=CIRCLE('',#907,2.E0);
#913=CIRCLE('',#912,2.E0);
#918=CIRCLE('',#917,2.E0);
#923=CIRCLE('',#922,2.E0);
#952=CIRCLE('',#951,2.E0);
#957=CIRCLE('',#956,2.E0);
#970=CIRCLE('',#969,2.E0);
#975=CIRCLE('',#974,2.E0);
#988=CIRCLE('',#987,2.E0);
#993=CIRCLE('',#992,2.E0);
#1006=CIRCLE('',#1005,2.E0);
#1011=CIRCLE('',#1010,2.E0);
#1129=EDGE_CURVE('',#1099,#1095,#893,.T.);
#1131=EDGE_CURVE('',#1094,#1095,#947,.T.);
#1133=EDGE_CURVE('',#1094,#1098,#952,.T.);
#1135=EDGE_CURVE('',#1098,#1099,#943,.T.);
#1145=EDGE_CURVE('',#1073,#1070,#927,.T.);
#1147=EDGE_CURVE('',#1081,#1073,#931,.T.);
#1149=EDGE_CURVE('',#1079,#1081,#935,.T.);
#1151=EDGE_CURVE('',#1070,#1079,#939,.T.);
#1155=EDGE_CURVE('',#1103,#1107,#898,.T.);
#1157=EDGE_CURVE('',#1107,#1103,#903,.T.);
#1161=EDGE_CURVE('',#1111,#1115,#908,.T.);
#1163=EDGE_CURVE('',#1115,#1111,#913,.T.);
#1167=EDGE_CURVE('',#1119,#1123,#918,.T.);
#1169=EDGE_CURVE('',#1123,#1119,#923,.T.);
#1173=EDGE_CURVE('',#1095,#1099,#888,.T.);
#1186=EDGE_CURVE('',#1098,#1094,#957,.T.);
#1208=EDGE_CURVE('',#1106,#1107,#961,.T.);
#1210=EDGE_CURVE('',#1106,#1102,#975,.T.);
#1212=EDGE_CURVE('',#1102,#1103,#965,.T.);
#1224=EDGE_CURVE('',#1102,#1106,#970,.T.);
#1246=EDGE_CURVE('',#1114,#1115,#979,.T.);
#1248=EDGE_CURVE('',#1114,#1110,#993,.T.);
#1250=EDGE_CURVE('',#1110,#1111,#983,.T.);
#1262=EDGE_CURVE('',#1110,#1114,#988,.T.);
#1284=EDGE_CURVE('',#1122,#1123,#997,.T.);
#1286=EDGE_CURVE('',#1122,#1118,#1011,.T.);
#1288=EDGE_CURVE('',#1118,#1119,#1001,.T.);
#1300=EDGE_CURVE('',#1118,#1122,#1006,.T.);
#1322=EDGE_CURVE('',#1070,#1071,#1015,.T.);
#1324=EDGE_CURVE('',#1071,#1075,#1059,.T.);
#1326=EDGE_CURVE('',#1075,#1083,#1047,.T.);
#1328=EDGE_CURVE('',#1083,#1087,#1035,.T.);
#1330=EDGE_CURVE('',#1087,#1073,#1027,.T.);
#1342=EDGE_CURVE('',#1077,#1079,#1019,.T.);
#1344=EDGE_CURVE('',#1071,#1077,#1023,.T.);
#1354=EDGE_CURVE('',#1081,#1091,#1031,.T.);
#1356=EDGE_CURVE('',#1091,#1089,#1039,.T.);
#1358=EDGE_CURVE('',#1089,#1085,#1051,.T.);
#1360=EDGE_CURVE('',#1085,#1077,#1063,.T.);
#1373=EDGE_CURVE('',#1087,#1091,#1043,.T.);
#1386=EDGE_CURVE('',#1083,#1089,#1055,.T.);
#1399=EDGE_CURVE('',#1075,#1085,#1067,.T.);
#1420=(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(.MILLI.,.METRE.));
#1422=(NAMED_UNIT(*)PLANE_ANGLE_UNIT()SI_UNIT($,.RADIAN.));
#1425=(NAMED_UNIT(*)SI_UNIT($,.STERADIAN.)SOLID_ANGLE_UNIT());
#1431=AXIS2_PLACEMENT_3D('',#1428,#1429,#1430);
#1432=ADVANCED_BREP_SHAPE_REPRESENTATION('',(#1431,#1419),#1427);
#1436=PRODUCT_DEFINITION('design','',#1435,#865);
#1437=PRODUCT_DEFINITION_SHAPE('','SHAPE FOR LAD4-3DSOLID_5931.',#1436);
#1438=SHAPE_DEFINITION_REPRESENTATION(#1437,#1432);
#1439=NEXT_ASSEMBLY_USAGE_OCCURRENCE('430','Next assembly relationship',
'LAD4-3DSOLID_5931',#4692,#1436,$);
#1440=PRODUCT_DEFINITION_SHAPE('Placement #430',
'Placement of LAD4-3DSOLID_5931 with respect to LAD4_ASM',#1439);
#1452=CIRCLE('',#1451,3.E0);
#1457=CIRCLE('',#1456,3.E0);
#1462=CIRCLE('',#1461,3.E0);
#1467=CIRCLE('',#1466,3.E0);
#1472=CIRCLE('',#1471,3.E0);
#1477=CIRCLE('',#1476,3.E0);
#1482=CIRCLE('',#1481,3.E0);
#1487=CIRCLE('',#1486,3.E0);
#1512=CIRCLE('',#1511,3.E0);
#1517=CIRCLE('',#1516,3.E0);
#1522=CIRCLE('',#1521,4.3E0);
#1527=CIRCLE('',#1526,4.3E0);
#1540=CIRCLE('',#1539,4.3E0);
#1545=CIRCLE('',#1544,4.3E0);
#1550=CIRCLE('',#1549,4.3E0);
#1555=CIRCLE('',#1554,4.3E0);
#1560=CIRCLE('',#1559,4.3E0);
#1565=CIRCLE('',#1564,4.3E0);
#1570=CIRCLE('',#1569,4.3E0);
#1575=CIRCLE('',#1574,4.3E0);
#1596=CIRCLE('',#1595,3.E0);
#1601=CIRCLE('',#1600,3.E0);
#1606=CIRCLE('',#1605,4.3E0);
#1611=CIRCLE('',#1610,4.3E0);
#1632=CIRCLE('',#1631,3.E0);
#1637=CIRCLE('',#1636,3.E0);
#1642=CIRCLE('',#1641,4.3E0);
#1647=CIRCLE('',#1646,4.3E0);
#1668=CIRCLE('',#1667,3.E0);
#1673=CIRCLE('',#1672,3.E0);
#1678=CIRCLE('',#1677,4.3E0);
#1683=CIRCLE('',#1682,4.3E0);
#1805=EDGE_CURVE('',#1742,#1738,#1452,.T.);
#1807=EDGE_CURVE('',#1738,#1739,#1507,.T.);
#1809=EDGE_CURVE('',#1739,#1743,#1517,.T.);
#1811=EDGE_CURVE('',#1742,#1743,#1503,.T.);
#1821=EDGE_CURVE('',#1729,#1722,#1491,.T.);
#1823=EDGE_CURVE('',#1729,#1735,#1707,.T.);
#1825=EDGE_CURVE('',#1731,#1735,#1495,.T.);
#1827=EDGE_CURVE('',#1722,#1731,#1499,.T.);
#1831=EDGE_CURVE('',#1758,#1754,#1462,.T.);
#1833=EDGE_CURVE('',#1754,#1758,#1467,.T.);
#1837=EDGE_CURVE('',#1774,#1770,#1472,.T.);
#1839=EDGE_CURVE('',#1770,#1774,#1477,.T.);
#1843=EDGE_CURVE('',#1790,#1786,#1482,.T.);
#1845=EDGE_CURVE('',#1786,#1790,#1487,.T.);
#1850=EDGE_CURVE('',#1738,#1742,#1457,.T.);
#1862=EDGE_CURVE('',#1743,#1739,#1512,.T.);
#1873=EDGE_CURVE('',#1751,#1747,#1522,.T.);
#1875=EDGE_CURVE('',#1747,#1751,#1527,.T.);
#1889=EDGE_CURVE('',#1746,#1750,#1545,.T.);
#1891=EDGE_CURVE('',#1750,#1751,#1531,.T.);
#1894=EDGE_CURVE('',#1746,#1747,#1535,.T.);
#1904=EDGE_CURVE('',#1723,#1733,#1579,.T.);
#1906=EDGE_CURVE('',#1723,#1727,#1719,.T.);
#1908=EDGE_CURVE('',#1726,#1727,#1583,.T.);
#1910=EDGE_CURVE('',#1726,#1733,#1699,.T.);
#1914=EDGE_CURVE('',#1766,#1762,#1550,.T.);
#1916=EDGE_CURVE('',#1762,#1766,#1555,.T.);
#1920=EDGE_CURVE('',#1782,#1778,#1560,.T.);
#1922=EDGE_CURVE('',#1778,#1782,#1565,.T.);
#1926=EDGE_CURVE('',#1798,#1794,#1570,.T.);
#1928=EDGE_CURVE('',#1794,#1798,#1575,.T.);
#1932=EDGE_CURVE('',#1750,#1746,#1540,.T.);
#1956=EDGE_CURVE('',#1762,#1763,#1591,.T.);
#1958=EDGE_CURVE('',#1763,#1767,#1611,.T.);
#1960=EDGE_CURVE('',#1766,#1767,#1587,.T.);
#1972=EDGE_CURVE('',#1767,#1763,#1606,.T.);
#1987=EDGE_CURVE('',#1759,#1755,#1596,.T.);
#1989=EDGE_CURVE('',#1755,#1759,#1601,.T.);
#2000=EDGE_CURVE('',#1758,#1759,#1615,.T.);
#2003=EDGE_CURVE('',#1754,#1755,#1619,.T.);
#2026=EDGE_CURVE('',#1778,#1779,#1627,.T.);
#2028=EDGE_CURVE('',#1779,#1783,#1647,.T.);
#2030=EDGE_CURVE('',#1782,#1783,#1623,.T.);
#2042=EDGE_CURVE('',#1783,#1779,#1642,.T.);
#2057=EDGE_CURVE('',#1775,#1771,#1632,.T.);
#2059=EDGE_CURVE('',#1771,#1775,#1637,.T.);
#2070=EDGE_CURVE('',#1774,#1775,#1651,.T.);
#2073=EDGE_CURVE('',#1770,#1771,#1655,.T.);
#2096=EDGE_CURVE('',#1794,#1795,#1663,.T.);
#2098=EDGE_CURVE('',#1795,#1799,#1683,.T.);
#2100=EDGE_CURVE('',#1798,#1799,#1659,.T.);
#2112=EDGE_CURVE('',#1799,#1795,#1678,.T.);
#2127=EDGE_CURVE('',#1791,#1787,#1668,.T.);
#2129=EDGE_CURVE('',#1787,#1791,#1673,.T.);
#2140=EDGE_CURVE('',#1790,#1791,#1687,.T.);
#2143=EDGE_CURVE('',#1786,#1787,#1691,.T.);
#2165=EDGE_CURVE('',#1733,#1729,#1695,.T.);
#2168=EDGE_CURVE('',#1722,#1723,#1711,.T.);
#2181=EDGE_CURVE('',#1735,#1726,#1703,.T.);
#2193=EDGE_CURVE('',#1727,#1731,#1715,.T.);
#2214=(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(.MILLI.,.METRE.));
#2216=(NAMED_UNIT(*)PLANE_ANGLE_UNIT()SI_UNIT($,.RADIAN.));
#2219=(NAMED_UNIT(*)SI_UNIT($,.STERADIAN.)SOLID_ANGLE_UNIT());
#2225=AXIS2_PLACEMENT_3D('',#2222,#2223,#2224);
#2226=ADVANCED_BREP_SHAPE_REPRESENTATION('',(#2225,#2213),#2221);
#2231=PRODUCT_DEFINITION('design','',#2230,#2227);
#2232=PRODUCT_DEFINITION_SHAPE('','SHAPE FOR LAD4-3DSOLID_5938.',#2231);
#2233=SHAPE_DEFINITION_REPRESENTATION(#2232,#2226);
#2234=NEXT_ASSEMBLY_USAGE_OCCURRENCE('431','Next assembly relationship',
'LAD4-3DSOLID_5938',#4692,#2231,$);
#2235=PRODUCT_DEFINITION_SHAPE('Placement #431',
'Placement of LAD4-3DSOLID_5938 with respect to LAD4_ASM',#2234);
#2247=CIRCLE('',#2246,2.5E0);
#2252=CIRCLE('',#2251,2.5E0);
#2265=CIRCLE('',#2264,2.5E0);
#2270=CIRCLE('',#2269,2.5E0);
#2275=CIRCLE('',#2274,4.E0);
#2280=CIRCLE('',#2279,4.E0);
#2309=CIRCLE('',#2308,4.E0);
#2314=CIRCLE('',#2313,4.E0);
#2327=CIRCLE('',#2326,4.E0);
#2336=CIRCLE('',#2335,4.E0);
#2345=CIRCLE('',#2344,4.E0);
#2350=CIRCLE('',#2349,4.E0);
#2388=EDGE_CURVE('',#2369,#2373,#2252,.T.);
#2390=EDGE_CURVE('',#2373,#2374,#2260,.T.);
#2392=EDGE_CURVE('',#2374,#2370,#2265,.T.);
#2394=EDGE_CURVE('',#2369,#2370,#2256,.T.);
#2404=EDGE_CURVE('',#2373,#2369,#2247,.T.);
#2417=EDGE_CURVE('',#2370,#2374,#2270,.T.);
#2428=EDGE_CURVE('',#2378,#2382,#2275,.T.);
#2430=EDGE_CURVE('',#2382,#2378,#2280,.T.);
#2445=EDGE_CURVE('',#2381,#2382,#2304,.T.);
#2447=EDGE_CURVE('',#2381,#2366,#2345,.T.);
#2449=EDGE_CURVE('',#2362,#2366,#2284,.T.);
#2451=EDGE_CURVE('',#2362,#2358,#2327,.T.);
#2453=EDGE_CURVE('',#2353,#2358,#2288,.T.);
#2455=EDGE_CURVE('',#2353,#2377,#2309,.T.);
#2457=EDGE_CURVE('',#2377,#2378,#2292,.T.);
#2469=EDGE_CURVE('',#2377,#2354,#2314,.T.);
#2471=EDGE_CURVE('',#2357,#2354,#2296,.T.);
#2473=EDGE_CURVE('',#2357,#2361,#2336,.T.);
#2475=EDGE_CURVE('',#2365,#2361,#2300,.T.);
#2477=EDGE_CURVE('',#2365,#2381,#2350,.T.);
#2489=EDGE_CURVE('',#2353,#2354,#2322,.T.);
#2501=EDGE_CURVE('',#2357,#2358,#2318,.T.);
#2514=EDGE_CURVE('',#2361,#2362,#2331,.T.);
#2527=EDGE_CURVE('',#2365,#2366,#2340,.T.);
#2547=(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(.MILLI.,.METRE.));
#2549=(NAMED_UNIT(*)PLANE_ANGLE_UNIT()SI_UNIT($,.RADIAN.));
#2552=(NAMED_UNIT(*)SI_UNIT($,.STERADIAN.)SOLID_ANGLE_UNIT());
#2558=AXIS2_PLACEMENT_3D('',#2555,#2556,#2557);
#2559=ADVANCED_BREP_SHAPE_REPRESENTATION('',(#2558,#2546),#2554);
#2563=PRODUCT_DEFINITION('design','',#2562,#2227);
#2564=PRODUCT_DEFINITION_SHAPE('','SHAPE FOR LAD4-3DSOLID_5964.',#2563);
#2565=SHAPE_DEFINITION_REPRESENTATION(#2564,#2559);
#2566=NEXT_ASSEMBLY_USAGE_OCCURRENCE('432','Next assembly relationship',
'LAD4-3DSOLID_5964',#4692,#2563,$);
#2567=PRODUCT_DEFINITION_SHAPE('Placement #432',
'Placement of LAD4-3DSOLID_5964 with respect to LAD4_ASM',#2566);
#2579=CIRCLE('',#2578,2.5E0);
#2584=CIRCLE('',#2583,2.5E0);
#2597=CIRCLE('',#2596,2.5E0);
#2602=CIRCLE('',#2601,2.5E0);
#2607=CIRCLE('',#2606,4.E0);
#2612=CIRCLE('',#2611,4.E0);
#2641=CIRCLE('',#2640,4.E0);
#2646=CIRCLE('',#2645,4.E0);
#2659=CIRCLE('',#2658,4.E0);
#2668=CIRCLE('',#2667,4.E0);
#2677=CIRCLE('',#2676,4.E0);
#2682=CIRCLE('',#2681,4.E0);
#2720=EDGE_CURVE('',#2701,#2705,#2584,.T.);
#2722=EDGE_CURVE('',#2705,#2706,#2592,.T.);
#2724=EDGE_CURVE('',#2706,#2702,#2597,.T.);
#2726=EDGE_CURVE('',#2701,#2702,#2588,.T.);
#2736=EDGE_CURVE('',#2705,#2701,#2579,.T.);
#2749=EDGE_CURVE('',#2702,#2706,#2602,.T.);
#2760=EDGE_CURVE('',#2710,#2714,#2607,.T.);
#2762=EDGE_CURVE('',#2714,#2710,#2612,.T.);
#2777=EDGE_CURVE('',#2713,#2714,#2636,.T.);
#2779=EDGE_CURVE('',#2713,#2698,#2677,.T.);
#2781=EDGE_CURVE('',#2694,#2698,#2616,.T.);
#2783=EDGE_CURVE('',#2694,#2690,#2659,.T.);
#2785=EDGE_CURVE('',#2685,#2690,#2620,.T.);
#2787=EDGE_CURVE('',#2685,#2709,#2641,.T.);
#2789=EDGE_CURVE('',#2709,#2710,#2624,.T.);
#2801=EDGE_CURVE('',#2709,#2686,#2646,.T.);
#2803=EDGE_CURVE('',#2689,#2686,#2628,.T.);
#2805=EDGE_CURVE('',#2689,#2693,#2668,.T.);
#2807=EDGE_CURVE('',#2697,#2693,#2632,.T.);
#2809=EDGE_CURVE('',#2697,#2713,#2682,.T.);
#2821=EDGE_CURVE('',#2685,#2686,#2654,.T.);
#2833=EDGE_CURVE('',#2689,#2690,#2650,.T.);
#2846=EDGE_CURVE('',#2693,#2694,#2663,.T.);
#2859=EDGE_CURVE('',#2697,#2698,#2672,.T.);
#2879=(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(.MILLI.,.METRE.));
#2881=(NAMED_UNIT(*)PLANE_ANGLE_UNIT()SI_UNIT($,.RADIAN.));
#2884=(NAMED_UNIT(*)SI_UNIT($,.STERADIAN.)SOLID_ANGLE_UNIT());
#2890=AXIS2_PLACEMENT_3D('',#2887,#2888,#2889);
#2891=ADVANCED_BREP_SHAPE_REPRESENTATION('',(#2890,#2878),#2886);
#2896=PRODUCT_DEFINITION('design','',#2895,#2892);
#2897=PRODUCT_DEFINITION_SHAPE('','SHAPE FOR LAD4-3DSOLID_5968.',#2896);
#2898=SHAPE_DEFINITION_REPRESENTATION(#2897,#2891);
#2899=NEXT_ASSEMBLY_USAGE_OCCURRENCE('433','Next assembly relationship',
'LAD4-3DSOLID_5968',#4692,#2896,$);
#2900=PRODUCT_DEFINITION_SHAPE('Placement #433',
'Placement of LAD4-3DSOLID_5968 with respect to LAD4_ASM',#2899);
#2912=CIRCLE('',#2911,2.5E0);
#2917=CIRCLE('',#2916,2.5E0);
#2930=CIRCLE('',#2929,2.5E0);
#2935=CIRCLE('',#2934,2.5E0);
#2940=CIRCLE('',#2939,4.E0);
#2945=CIRCLE('',#2944,4.E0);
#2974=CIRCLE('',#2973,4.E0);
#2979=CIRCLE('',#2978,4.E0);
#2992=CIRCLE('',#2991,4.E0);
#3001=CIRCLE('',#3000,4.E0);
#3010=CIRCLE('',#3009,4.E0);
#3015=CIRCLE('',#3014,4.E0);
#3053=EDGE_CURVE('',#3034,#3038,#2917,.T.);
#3055=EDGE_CURVE('',#3038,#3039,#2925,.T.);
#3057=EDGE_CURVE('',#3039,#3035,#2930,.T.);
#3059=EDGE_CURVE('',#3034,#3035,#2921,.T.);
#3069=EDGE_CURVE('',#3038,#3034,#2912,.T.);
#3082=EDGE_CURVE('',#3035,#3039,#2935,.T.);
#3093=EDGE_CURVE('',#3043,#3047,#2940,.T.);
#3095=EDGE_CURVE('',#3047,#3043,#2945,.T.);
#3110=EDGE_CURVE('',#3046,#3047,#2969,.T.);
#3112=EDGE_CURVE('',#3046,#3031,#3010,.T.);
#3114=EDGE_CURVE('',#3027,#3031,#2949,.T.);
#3116=EDGE_CURVE('',#3027,#3023,#2992,.T.);
#3118=EDGE_CURVE('',#3018,#3023,#2953,.T.);
#3120=EDGE_CURVE('',#3018,#3042,#2974,.T.);
#3122=EDGE_CURVE('',#3042,#3043,#2957,.T.);
#3134=EDGE_CURVE('',#3042,#3019,#2979,.T.);
#3136=EDGE_CURVE('',#3022,#3019,#2961,.T.);
#3138=EDGE_CURVE('',#3022,#3026,#3001,.T.);
#3140=EDGE_CURVE('',#3030,#3026,#2965,.T.);
#3142=EDGE_CURVE('',#3030,#3046,#3015,.T.);
#3154=EDGE_CURVE('',#3018,#3019,#2987,.T.);
#3166=EDGE_CURVE('',#3022,#3023,#2983,.T.);
#3179=EDGE_CURVE('',#3026,#3027,#2996,.T.);
#3192=EDGE_CURVE('',#3030,#3031,#3005,.T.);
#3212=(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(.MILLI.,.METRE.));
#3214=(NAMED_UNIT(*)PLANE_ANGLE_UNIT()SI_UNIT($,.RADIAN.));
#3217=(NAMED_UNIT(*)SI_UNIT($,.STERADIAN.)SOLID_ANGLE_UNIT());
#3223=AXIS2_PLACEMENT_3D('',#3220,#3221,#3222);
#3224=ADVANCED_BREP_SHAPE_REPRESENTATION('',(#3223,#3211),#3219);
#3228=PRODUCT_DEFINITION('design','',#3227,#2892);
#3229=PRODUCT_DEFINITION_SHAPE('','SHAPE FOR LAD4-3DSOLID_5969.',#3228);
#3230=SHAPE_DEFINITION_REPRESENTATION(#3229,#3224);
#3231=NEXT_ASSEMBLY_USAGE_OCCURRENCE('434','Next assembly relationship',
'LAD4-3DSOLID_5969',#4692,#3228,$);
#3232=PRODUCT_DEFINITION_SHAPE('Placement #434',
'Placement of LAD4-3DSOLID_5969 with respect to LAD4_ASM',#3231);
#3244=CIRCLE('',#3243,2.5E0);
#3249=CIRCLE('',#3248,2.5E0);
#3262=CIRCLE('',#3261,2.5E0);
#3267=CIRCLE('',#3266,2.5E0);
#3272=CIRCLE('',#3271,4.E0);
#3277=CIRCLE('',#3276,4.E0);
#3306=CIRCLE('',#3305,4.E0);
#3311=CIRCLE('',#3310,4.E0);
#3324=CIRCLE('',#3323,4.E0);
#3333=CIRCLE('',#3332,4.E0);
#3342=CIRCLE('',#3341,4.E0);
#3347=CIRCLE('',#3346,4.E0);
#3385=EDGE_CURVE('',#3366,#3370,#3249,.T.);
#3387=EDGE_CURVE('',#3370,#3371,#3257,.T.);
#3389=EDGE_CURVE('',#3371,#3367,#3262,.T.);
#3391=EDGE_CURVE('',#3366,#3367,#3253,.T.);
#3401=EDGE_CURVE('',#3370,#3366,#3244,.T.);
#3414=EDGE_CURVE('',#3367,#3371,#3267,.T.);
#3425=EDGE_CURVE('',#3375,#3379,#3272,.T.);
#3427=EDGE_CURVE('',#3379,#3375,#3277,.T.);
#3442=EDGE_CURVE('',#3378,#3379,#3301,.T.);
#3444=EDGE_CURVE('',#3378,#3363,#3342,.T.);
#3446=EDGE_CURVE('',#3359,#3363,#3281,.T.);
#3448=EDGE_CURVE('',#3359,#3355,#3324,.T.);
#3450=EDGE_CURVE('',#3350,#3355,#3285,.T.);
#3452=EDGE_CURVE('',#3350,#3374,#3306,.T.);
#3454=EDGE_CURVE('',#3374,#3375,#3289,.T.);
#3466=EDGE_CURVE('',#3374,#3351,#3311,.T.);
#3468=EDGE_CURVE('',#3354,#3351,#3293,.T.);
#3470=EDGE_CURVE('',#3354,#3358,#3333,.T.);
#3472=EDGE_CURVE('',#3362,#3358,#3297,.T.);
#3474=EDGE_CURVE('',#3362,#3378,#3347,.T.);
#3486=EDGE_CURVE('',#3350,#3351,#3319,.T.);
#3498=EDGE_CURVE('',#3354,#3355,#3315,.T.);
#3511=EDGE_CURVE('',#3358,#3359,#3328,.T.);
#3524=EDGE_CURVE('',#3362,#3363,#3337,.T.);
#3544=(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(.MILLI.,.METRE.));
#3546=(NAMED_UNIT(*)PLANE_ANGLE_UNIT()SI_UNIT($,.RADIAN.));
#3549=(NAMED_UNIT(*)SI_UNIT($,.STERADIAN.)SOLID_ANGLE_UNIT());
#3555=AXIS2_PLACEMENT_3D('',#3552,#3553,#3554);
#3556=ADVANCED_BREP_SHAPE_REPRESENTATION('',(#3555,#3543),#3551);
#3561=PRODUCT_DEFINITION('design','',#3560,#3557);
#3562=PRODUCT_DEFINITION_SHAPE('','SHAPE FOR LAD4-3DSOLID_5970.',#3561);
#3563=SHAPE_DEFINITION_REPRESENTATION(#3562,#3556);
#3564=NEXT_ASSEMBLY_USAGE_OCCURRENCE('435','Next assembly relationship',
'LAD4-3DSOLID_5970',#4692,#3561,$);
#3565=PRODUCT_DEFINITION_SHAPE('Placement #435',
'Placement of LAD4-3DSOLID_5970 with respect to LAD4_ASM',#3564);
#3577=CIRCLE('',#3576,1.5E1);
#3582=CIRCLE('',#3581,1.5E1);
#3595=CIRCLE('',#3594,1.5E1);
#3600=CIRCLE('',#3599,1.5E1);
#3605=CIRCLE('',#3604,1.65E1);
#3610=CIRCLE('',#3609,1.65E1);
#3615=CIRCLE('',#3614,1.65E1);
#3620=CIRCLE('',#3619,1.65E1);
#3625=CIRCLE('',#3624,2.E1);
#3630=CIRCLE('',#3629,2.E1);
#3643=CIRCLE('',#3642,1.8E1);
#3648=CIRCLE('',#3647,1.8E1);
#3653=CIRCLE('',#3652,2.E1);
#3658=CIRCLE('',#3657,2.E1);
#3671=CIRCLE('',#3670,1.75E0);
#3676=CIRCLE('',#3675,1.75E0);
#3681=CIRCLE('',#3680,1.8E1);
#3686=CIRCLE('',#3685,1.8E1);
#3699=CIRCLE('',#3698,1.75E0);
#3704=CIRCLE('',#3703,1.75E0);
#3758=EDGE_CURVE('',#3715,#3719,#3582,.T.);
#3760=EDGE_CURVE('',#3719,#3720,#3590,.T.);
#3762=EDGE_CURVE('',#3720,#3716,#3595,.T.);
#3764=EDGE_CURVE('',#3715,#3716,#3586,.T.);
#3774=EDGE_CURVE('',#3719,#3715,#3577,.T.);
#3787=EDGE_CURVE('',#3716,#3720,#3600,.T.);
#3798=EDGE_CURVE('',#3728,#3724,#3605,.T.);
#3800=EDGE_CURVE('',#3724,#3728,#3610,.T.);
#3814=EDGE_CURVE('',#3723,#3727,#3620,.T.);
#3816=EDGE_CURVE('',#3727,#3728,#3638,.T.);
#3819=EDGE_CURVE('',#3723,#3724,#3634,.T.);
#3829=EDGE_CURVE('',#3752,#3748,#3625,.T.);
#3831=EDGE_CURVE('',#3748,#3752,#3630,.T.);
#3835=EDGE_CURVE('',#3727,#3723,#3615,.T.);
#3858=EDGE_CURVE('',#3747,#3751,#3658,.T.);
#3860=EDGE_CURVE('',#3751,#3752,#3712,.T.);
#3863=EDGE_CURVE('',#3747,#3748,#3708,.T.);
#3873=EDGE_CURVE('',#3751,#3747,#3653,.T.);
#3878=EDGE_CURVE('',#3740,#3744,#3643,.T.);
#3880=EDGE_CURVE('',#3744,#3740,#3648,.T.);
#3890=EDGE_CURVE('',#3743,#3739,#3686,.T.);
#3892=EDGE_CURVE('',#3739,#3740,#3662,.T.);
#3895=EDGE_CURVE('',#3743,#3744,#3666,.T.);
#3905=EDGE_CURVE('',#3739,#3743,#3681,.T.);
#3910=EDGE_CURVE('',#3731,#3735,#3671,.T.);
#3912=EDGE_CURVE('',#3735,#3731,#3676,.T.);
#3923=EDGE_CURVE('',#3735,#3736,#3694,.T.);
#3925=EDGE_CURVE('',#3736,#3732,#3704,.T.);
#3927=EDGE_CURVE('',#3731,#3732,#3690,.T.);
#3939=EDGE_CURVE('',#3732,#3736,#3699,.T.);
#3981=(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(.MILLI.,.METRE.));
#3983=(NAMED_UNIT(*)PLANE_ANGLE_UNIT()SI_UNIT($,.RADIAN.));
#3986=(NAMED_UNIT(*)SI_UNIT($,.STERADIAN.)SOLID_ANGLE_UNIT());
#3992=AXIS2_PLACEMENT_3D('',#3989,#3990,#3991);
#3993=ADVANCED_BREP_SHAPE_REPRESENTATION('',(#3992,#3980),#3988);
#3997=PRODUCT_DEFINITION('design','',#3996,#3557);
#3998=PRODUCT_DEFINITION_SHAPE('','SHAPE FOR LAD4-3DSOLID_5979.',#3997);
#3999=SHAPE_DEFINITION_REPRESENTATION(#3998,#3993);
#4000=NEXT_ASSEMBLY_USAGE_OCCURRENCE('436','Next assembly relationship',
'LAD4-3DSOLID_5979',#4692,#3997,$);
#4001=PRODUCT_DEFINITION_SHAPE('Placement #436',
'Placement of LAD4-3DSOLID_5979 with respect to LAD4_ASM',#4000);
#4063=B_SPLINE_CURVE_WITH_KNOTS('',3,(#4057,#4058,#4059,#4060,#4061,#4062),
.UNSPECIFIED.,.F.,.F.,(4,1,1,4),(0.E0,3.333333333333E-1,6.666666666667E-1,1.E0),
.UNSPECIFIED.);
#4074=B_SPLINE_CURVE_WITH_KNOTS('',3,(#4068,#4069,#4070,#4071,#4072,#4073),
.UNSPECIFIED.,.F.,.F.,(4,1,1,4),(0.E0,3.333333333333E-1,6.666666666667E-1,1.E0),
.UNSPECIFIED.);
#4085=B_SPLINE_CURVE_WITH_KNOTS('',3,(#4075,#4076,#4077,#4078,#4079,#4080,#4081,
#4082,#4083,#4084),.UNSPECIFIED.,.F.,.F.,(4,1,1,1,1,1,1,4),(0.E0,
1.428571428571E-1,2.857142857143E-1,4.285714285714E-1,5.714285714286E-1,
7.142857142857E-1,8.571428571429E-1,1.E0),.UNSPECIFIED.);
#4100=B_SPLINE_CURVE_WITH_KNOTS('',3,(#4090,#4091,#4092,#4093,#4094,#4095,#4096,
#4097,#4098,#4099),.UNSPECIFIED.,.F.,.F.,(4,1,1,1,1,1,1,4),(0.E0,
1.428571428571E-1,2.857142857143E-1,4.285714285714E-1,5.714285714286E-1,
7.142857142857E-1,8.571428571429E-1,1.E0),.UNSPECIFIED.);
#4139=B_SPLINE_CURVE_WITH_KNOTS('',3,(#4133,#4134,#4135,#4136,#4137,#4138),
.UNSPECIFIED.,.F.,.F.,(4,1,1,4),(0.E0,3.333333333333E-1,6.666666666667E-1,1.E0),
.UNSPECIFIED.);
#4150=B_SPLINE_CURVE_WITH_KNOTS('',3,(#4140,#4141,#4142,#4143,#4144,#4145,#4146,
#4147,#4148,#4149),.UNSPECIFIED.,.F.,.F.,(4,1,1,1,1,1,1,4),(0.E0,
1.428571428571E-1,2.857142857143E-1,4.285714285714E-1,5.714285714286E-1,
7.142857142857E-1,8.571428571429E-1,1.E0),.UNSPECIFIED.);
#4165=B_SPLINE_CURVE_WITH_KNOTS('',3,(#4159,#4160,#4161,#4162,#4163,#4164),
.UNSPECIFIED.,.F.,.F.,(4,1,1,4),(0.E0,3.333333333333E-1,6.666666666667E-1,1.E0),
.UNSPECIFIED.);
#4176=B_SPLINE_CURVE_WITH_KNOTS('',3,(#4166,#4167,#4168,#4169,#4170,#4171,#4172,
#4173,#4174,#4175),.UNSPECIFIED.,.F.,.F.,(4,1,1,1,1,1,1,4),(0.E0,
1.428571428571E-1,2.857142857143E-1,4.285714285714E-1,5.714285714286E-1,
7.142857142857E-1,8.571428571429E-1,1.E0),.UNSPECIFIED.);
#4240=EDGE_CURVE('',#4195,#4196,#4012,.T.);
#4242=EDGE_CURVE('',#4202,#4195,#4016,.T.);
#4244=EDGE_CURVE('',#4200,#4202,#4020,.T.);
#4246=EDGE_CURVE('',#4196,#4200,#4024,.T.);
#4256=EDGE_CURVE('',#4211,#4212,#4067,.T.);
#4258=EDGE_CURVE('',#4212,#4218,#4108,.T.);
#4260=EDGE_CURVE('',#4218,#4216,#4158,.T.);
#4262=EDGE_CURVE('',#4216,#4211,#4132,.T.);
#4266=EDGE_CURVE('',#4204,#4198,#4028,.T.);
#4268=EDGE_CURVE('',#4198,#4195,#4048,.T.);
#4271=EDGE_CURVE('',#4196,#4204,#4040,.T.);
#4282=EDGE_CURVE('',#4208,#4204,#4032,.T.);
#4284=EDGE_CURVE('',#4206,#4208,#4036,.T.);
#4286=EDGE_CURVE('',#4206,#4198,#4052,.T.);
#4298=EDGE_CURVE('',#4208,#4200,#4044,.T.);
#4309=EDGE_CURVE('',#4202,#4206,#4056,.T.);
#4334=EDGE_CURVE('',#4212,#4213,#4063,.T.);
#4337=EDGE_CURVE('',#4221,#4211,#4074,.T.);
#4339=EDGE_CURVE('',#4220,#4221,#4085,.T.);
#4341=EDGE_CURVE('',#4214,#4220,#4089,.T.);
#4343=EDGE_CURVE('',#4213,#4214,#4100,.T.);
#4354=EDGE_CURVE('',#4223,#4214,#4104,.T.);
#4356=EDGE_CURVE('',#4223,#4228,#4176,.T.);
#4358=EDGE_CURVE('',#4228,#4218,#4165,.T.);
#4371=EDGE_CURVE('',#4225,#4214,#4112,.T.);
#4373=EDGE_CURVE('',#4232,#4225,#4116,.T.);
#4375=EDGE_CURVE('',#4223,#4232,#4120,.T.);
#4386=EDGE_CURVE('',#4230,#4220,#4124,.T.);
#4388=EDGE_CURVE('',#4225,#4230,#4128,.T.);
#4399=EDGE_CURVE('',#4220,#4227,#4154,.T.);
#4401=EDGE_CURVE('',#4227,#4234,#4188,.T.);
#4403=EDGE_CURVE('',#4234,#4230,#4192,.T.);
#4416=EDGE_CURVE('',#4226,#4216,#4139,.T.);
#4418=EDGE_CURVE('',#4227,#4226,#4150,.T.);
#4434=EDGE_CURVE('',#4227,#4223,#4180,.T.);
#4447=EDGE_CURVE('',#4234,#4232,#4184,.T.);
#4467=(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(.MILLI.,.METRE.));
#4469=(NAMED_UNIT(*)PLANE_ANGLE_UNIT()SI_UNIT($,.RADIAN.));
#4472=(NAMED_UNIT(*)SI_UNIT($,.STERADIAN.)SOLID_ANGLE_UNIT());
#4478=AXIS2_PLACEMENT_3D('',#4475,#4476,#4477);
#4479=ADVANCED_BREP_SHAPE_REPRESENTATION('',(#4478,#4466),#4474);
#4484=PRODUCT_DEFINITION('design','',#4483,#4480);
#4485=PRODUCT_DEFINITION_SHAPE('','SHAPE FOR LAD4-3DSOLID_5996.',#4484);
#4486=SHAPE_DEFINITION_REPRESENTATION(#4485,#4479);
#4487=NEXT_ASSEMBLY_USAGE_OCCURRENCE('437','Next assembly relationship',
'LAD4-3DSOLID_5996',#4692,#4484,$);
#4488=PRODUCT_DEFINITION_SHAPE('Placement #437',
'Placement of LAD4-3DSOLID_5996 with respect to LAD4_ASM',#4487);
#4516=CIRCLE('',#4515,2.484361468141E1);
#4541=CIRCLE('',#4540,2.484361468141E1);
#4567=EDGE_CURVE('',#4548,#4549,#4499,.T.);
#4569=EDGE_CURVE('',#4548,#4553,#4541,.T.);
#4571=EDGE_CURVE('',#4552,#4553,#4503,.T.);
#4573=EDGE_CURVE('',#4552,#4549,#4516,.T.);
#4584=EDGE_CURVE('',#4549,#4561,#4524,.T.);
#4586=EDGE_CURVE('',#4559,#4561,#4507,.T.);
#4588=EDGE_CURVE('',#4548,#4559,#4511,.T.);
#4599=EDGE_CURVE('',#4552,#4555,#4536,.T.);
#4601=EDGE_CURVE('',#4561,#4555,#4520,.T.);
#4613=EDGE_CURVE('',#4557,#4553,#4528,.T.);
#4615=EDGE_CURVE('',#4555,#4557,#4532,.T.);
#4628=EDGE_CURVE('',#4557,#4559,#4545,.T.);
#4648=(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(.MILLI.,.METRE.));
#4650=(NAMED_UNIT(*)PLANE_ANGLE_UNIT()SI_UNIT($,.RADIAN.));
#4653=(NAMED_UNIT(*)SI_UNIT($,.STERADIAN.)SOLID_ANGLE_UNIT());
#4659=AXIS2_PLACEMENT_3D('',#4656,#4657,#4658);
#4660=ADVANCED_BREP_SHAPE_REPRESENTATION('',(#4659,#4647),#4655);
#4664=PRODUCT_DEFINITION('design','',#4663,#4480);
#4665=PRODUCT_DEFINITION_SHAPE('','SHAPE FOR LAD4-3DSOLID_6002.',#4664);
#4666=SHAPE_DEFINITION_REPRESENTATION(#4665,#4660);
#4667=NEXT_ASSEMBLY_USAGE_OCCURRENCE('438','Next assembly relationship',
'LAD4-3DSOLID_6002',#4692,#4664,$);
#4668=PRODUCT_DEFINITION_SHAPE('Placement #438',
'Placement of LAD4-3DSOLID_6002 with respect to LAD4_ASM',#4667);
#4676=(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(.MILLI.,.METRE.));
#4678=(NAMED_UNIT(*)PLANE_ANGLE_UNIT()SI_UNIT($,.RADIAN.));
#4681=(NAMED_UNIT(*)SI_UNIT($,.STERADIAN.)SOLID_ANGLE_UNIT());
#4687=AXIS2_PLACEMENT_3D('',#4684,#4685,#4686);
#4692=PRODUCT_DEFINITION('design','',#4691,#4688);
ENDSEC;
END-ISO-10303-21;