SensorsSensors for Gripper SystemsSensors for Gripper SystemsProduktfinder

MZES 25 PSL

Sensor for Gripper Systems

  • Special magnet field for use on gripping tongs with T-shaped slot
  • Short design
  • All-electronically
  • Fully encapsulated electronic circuitry, vibration-resistant
  • High reproducibility
  • High protection class
MZES 25 PSL - Sensor for Gripper Systems
Photo
Drawing
Connection diagram
TECHNICAL INFORMATION (typ.) +20°C, 24V DC
Cylinder groove T-groove
Mounting allen screw SW 1.5 mm
Maximum rating 100 mA, not short-circuit-proof, polarity-safe
Service voltage 10 ... 30 V DC
No-load current < 12 mA
Switching output pnp, NO
Contact rating 3 W max. (30 V, 100 mA)
Display LED: yellow - output signal
Voltage drop < 2,0 V
Switching frequency 1000 Hz
Reproducibility < 0,1 mm
Ambient temperature, operation -25 … +70 °C
Insulation voltage endurance 500 V
Protection class IP 68, (Device and cable), IP 67, (Connector)
Protection degree III, operation on protective low voltage
Casing material Die-cast zinc
Material PUR (Cable)
Connection Cable, 2,5 m, flying leads